Unencrypted Passwords May Cause SP3 to Fail to Connect to SMB Servers

• Microsoft Windows NT Workstation version 4.0 with Service Pack 3
• Microsoft Windows NT Server version 4.0 with Service Pack 3
• Microsoft Windows NT Workstation version 4.0 with Service Pack 4
• Microsoft Windows NT Server version 4.0 with Service Pack 4

SYMPTOMS

After upgrading your Windows NT 4.0 computer to Service Pack 3 (SP3), you are unable to connect to certain non-Microsoft Server Message Block (SMB) servers and you may receive the following error message:

System error 1240 has occurred.

The account is not authorized to login from this station.

CAUSE

Some non-Microsoft SMB servers only support unencrypted (plain text) password exchanges during authentication.

The SMB client redirector in Windows NT 4.0 Service Pack 3 and later handles unencrypted passwords differently than previous versions of Windows NT. Beginning with Windows NT 4.0 Service Pack 3, the SMB redirector does not send an unencrypted password during authentication to an SMB server unless you add a specific registry entry.

In previous versions, the client would automatically negotiate downward to unencrypted (plain text) authentication if requested from the server.

RESOLUTION

Check with the vendor of the SMB server product to see if there is a way to support encrypted password authentication, or if there is a newer version of the product that adds this support.

Alternatively, to enable unencrypted (plain text) passwords for the SMB client on Windows NT 4.0 Service Pack 3 and newer systems, modify the registry in the following way:

WARNING: Enabling this will allow unencrypted (plain text) passwords to be sent across the network when authenticating to an SMB server that requests this option. This can lessen the overall security of an environment and should only be done after careful consideration of the consequences of plain text passwords in your specific environment.

WARNING: Using the registry editor incorrectly can cause serious, system- wide problems that may require you to reinstall Windows NT. Microsoft cannot guarantee that any problems resulting from the use of the registry editor can be solved. Use this tool at your own risk.

1. Run Registry Editor (Regedt32.exe).



2. From the HKEY_LOCAL_MACHINE subtree, go to the following key:
   
   \SYSTEM\CurrentControlSet\Services\Rdr\Parameters



3. Click Add Value on the Edit menu.



4. Add the following:
   

   
         Value Name: EnablePlainTextPassword
         Data Type: REG_DWORD
         Data: 1 




5. Click OK and then quit Registry Editor.



6. Shut down and restart Windows NT.

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Rdr\Parameters,
   "EnablePlainTextPassword", 0x10001, 1 

Additional query words: 4.00 VAX

Keywords : kbnetwork NTSrvWkst
Version : WinNT:4.0
Platform : winnt
Issue type : kbinfo