Using DHCP to Assign IP Addresses to Secondary Networks

• Microsoft Windows NT Server version 4.0

SUMMARY

This article describes how to use Dynamic Host Configuration Protocol (DHCP) to lease IP addresses for routers configured to use secondary IP addressing.

MORE INFORMATION

Some routers can be configured with primary and secondary addresses that allows one port on a router to listen to multiple (logical) subnets.

Windows NT 4.0 Service Pack 2 and later introduced Superscoping support for DHCP. This allows a DHCP server with one network interface card to assign leases for multiple logical subnets.

To setup Superscopes in DHCP Manager, perform the following steps:

1. Create a new scope in DHCP Manager that corresponds with the primary subnet on the router.



2. Create the Superscopes that will be a part of the secondary address(es) configured on the router.



3. Use the DHCP Manager to define the Superscope to include all the subnets.

Q161571 Using DHCP Superscopes to Serve Multiple Logical Subnets

Additional query words: secondary router nt4sp2 ntdhcp

Keywords : kbnetwork nttcp NTSrv
Version : WinNT:4.0
Platform : winnt
Issue type : kbinfo