The information in this article applies to:
SUMMARYIf they are not configured properly, Remote Access Service (RAS) clients may not have full network access when the RAS server is also an OSPF router. This will only occur if OSPF is not properly configured and the RAS IP address pool does not match the IP subnet of a LAN interface. Loss of connectivity for LAN clients can also result if OSPF is not properly configured. MORE INFORMATION
On an OSPF router, OSPF must be running for that interface to be included
in OSPF link state advertisements. In other words, if a particular
interface is not running OSPF, it is considered external and the route to
this network will not be advertised. RAS interfaces, as well as LAN
interfaces, can be considered external to OSPF. If RAS is using a pool of
IP addresses from a unique subnet, then a route to this subnet needs to be
advertised.
Q166170 Using Default Gateways with OSPFIf RAS is using a pool of addresses that are within the same subnet as one of the routers' OSPF interfaces, or you are using DHCP for the RAS address pool, you need not do anything. In this case, the subnet is already being advertised and RAS will use Proxy ARP to get packets to the RAS clients. Additional query words: rras
Keywords : kbnetwork ntras nttcp ntrouter NTSrv |
Last Reviewed: February 19, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |