How to Configure Printers on FPNW to Service Pserver.nlm

• Microsoft Windows NT Server versions 3.5, 3.51, 4.0

SUMMARY

Novell offers two NetWare Pserver utilities: Pserver.nlm, which runs on the NetWare file server, and Pserver.exe, which runs on a dedicated workstation.

The two utilities serve basically the same purpose: they run as a resident program servicing up to 16 physical printers, and they poll the queues attached to those printers. Microsoft supports clients printing on both types of printer servers.

MORE INFORMATION

Use the procedure below to set up a print server to service a printer queue located at another server. In this case, you are going to service multiple printers attached and configured on a NetWare 3.x server. The Netware Pserver may then service Rprinters. (RPRINTER is a Novell utility that allows the sharing of printers connected to workstations; it may be run against NetWare's Pserver.nlm.)

In this example, the following assumptions are made:

NetWare server:	<Server Name>
NetWare file server name:	RED_1
NetWare print server Name:	PS_1 <Same as FPNW>
NetWare printer name:	PRN_1 PRN_2 PRN_3 PRN_4 <Same as FPNW>
NetWare print queue name:	NW_Q1 NW_Q2 NW_Q3 NW_Q4
File server(s) being serviced:	RED_1 NT_1

Windows NT FPNW Server:	<Server Name>
FPNW server name:	NT_1
FPNW print server name:	PS_1 <Same as NetWare>
FPNW printer name:	PRN_1 PRN_2 PRN_3 PRN_4 <Same as NetWare>
FPNW print queue name:	NT_Q1 NT_Q2 NT_Q3 NT_Q4 <Same as NetWare>
File server(s) being serviced:	NT_1 RED_1

NOTE: The print server name and printer name must be identical on both the NetWare and FPNW servers.

To set up the print server to service a printer queue located at another server, use the following steps:

1. Use Print Manager to create a printer on the FPNW server, and call it NT_Q1, NT_Q2, NT_Q3, or NT_Q4.



2. Select the correct driver for your printer from the printer's driver list, or click Other and type in the path for the drivers provided by the manufacturer.



3. Type the description (optional).



4. In the Print To box, click one NetWareCompatiblePServerX port. Each printer in the group should be associated with the same NetWareCompatiblePServerX port, up to a limit of 16 printers.



5. Share the printer on the network; FPNW will not see the queue unless it is shared. Make sure the share uses an 8.3 naming convention for downward compatibility.



6. Click the Details button. Set the Print Processor type to NWPRINT, if it is not set already.



7. Click OK to save the configuration.



8. Repeat steps 1 through 7 for each printer to be installed.



9. Under Server Manager, select FPNW, and then click Print Servers.
   
   
   1. Add a new print server.
   
   
   
   2. Call it PS_1. Provide a password if needed, or leave it blank. This user account, PS_PS_1, will be used by NetWare within User Manager to log on to the FPNW server.
   
   
   
   3. Select PS_1, and then click the Printers button to add a new printer. Call it PRN_1.
   
   
   
   4. Click to select the Defined Elsewhere type.
   
   
   
   5. Click OK to save the configuration.
   
   
   
   6. Repeat steps a through e for each printer to be installed, incrementing the number in the printer name (step c) by one each time.
   
   
   
   7. Select each printer in turn and click the Queues button in the Printers dialog box. Add the queue from the Available Queues box; for the first printer this will be NT_Q1, and so on. Click OK to save the configuration.
   
   
   
   8. Repeat step g for each printer to be installed, each time selecting the queue that corresponds with the printer that was created in Print Manager in step 1 (NT_Q2, NT_Q3, and so on).
   
   
   
   9. Click to select the File Server option in the Print Servers dialog box, and add RED_1 to be serviced from the available list of file servers.
   
   
   

Not authorized to service queue <nt computer name_FPNW/queue name>. Queue will not be serviced by Printer 0, <printer name>.

1. Highlight the following Registry subkey:
   
   HKEY_LOCAL_MACHINE\System\CurrentControlSet
   \Services\FPNW\Bindery\Type03
   
   NOTE: The above registry key is one path; it has been wrapped for readability.



2. Expand the Name container to find all queues that are assigned to the Pserver, which will look similar to the following:
   

   
         TQUEUE4  ObjectID 0x80040003
         TQUEUE3  ObjectID 0x80030003
         TQUEUE2  ObjectID 0x80020003
         TQUEUE1  ObjectID 0x80010003 




3. After you know the object IDs of the relevant queues (for example, TQUEUE4 ObjectID 0x80040003), go to the subcontainer for that object ID (still in the Type03 container). There will be two containers: one called NT_Q_NAME, the other called Q_SERVERS.



4. Of the relevant queues (TQUEUE1, TQUEUE2, TQUEUE3, or TQUEUE4 in this example), one of the Q_SERVERS will have nonzero values in the Segment1 field, and the others will have all zeros. The Q_SERVERS that have all zeros are incorrect, as this is the list of object IDs of PServer devices that can access it.



5. Copy the nonzero Segment1 field from its queue and paste the binary data into the Segment1 field of the queue that contains all zeros. This will give both queues the same list of Pservers.



6. After you have replaced the all-zero data fields, you do not need to reboot the server; the Pserver will work immediately.

1. From a command prompt, run Pconsole.exe.



2. Click Print Server Information, click PS_1, click Print Server Configuration, and then click File Servers to be Serviced.



3. Press the INSERT key.



4. Click Available File Servers, click FPNW Server (NT_1), and then press ENTER.



5. Press ESCAPE to exit Pconsole.



6. Unload or reload Pserver.nlm from the system console.

Keywords : kbprint kbsetup ntprotocol NTSrv
Version : WinNT:3.5,3.51,4.0
Platform : winnt
Issue type : kbhowto