Windows NT 4.0 Post SP3 Hotfix Can Cause Stop 0x1E in Win32k.sys

• Microsoft Windows NT Workstation version 4.0
• Microsoft Windows NT Server version 4.0

SYMPTOMS

After you install Double Click or Java Post Service Pack 3 (SP3) hotfixes, the system blue screens with a stop error message in Win32k.sys:

STOP: 0x0000001e (0xc000001d, 0x00000023, 0x00000000, 0x00000000)

CAUSE

Installing the Post SP3 hotfix Double Click or Java after the GetAdmin hotfix causes the Win32k.sys file to be incompatible with the kernel.

The Win32k.sys file furnished with the Double Click hotfix and the Java hotfix is not compatible with the kernel furnished with the GetAdmin hotfix. The Win32k.sys file furnished with the GetAdmin hotfix is dated 7/12/97. The versions of Win32k.sys supplied with the other hotfixes have earlier dates.

RESOLUTION

Replace the Win32k.sys file with the version from the GetAdmin hotfix, dated 7/12/97.

If the operating system is installed on a FAT partition, this can be accomplished by starting the system with a DOS boot floppy disk and copying the correct Win32k.sys from the most recently installed hotfix uninstall directory to the System32 directory.

The Double Click hotfix uninstall directory is $NTUninstallQ170510$. The Java hotfix uninstall directory is $NTUninstallQ168748$. Both reside under the system root directory, usually called \Winnt.

If the operating system is installed on an NTFS partition, a parallel installation of the operating system can be done and the file can be replaced in the manner described above while you are booted to the parallel installation.

If a parallel installation is not possible (for example, there is insufficient disk space), perform the following steps:

1. Make a copy of the current Emergency Repair Disk (ERD).



2. Delete the registry hives from the ERD you just copied (this is required in order to make sufficient space for the Win32k.sys file on the disk).



3. Copy the correct version of the Win32k.sys file to the root of the ERD (the file can be obtained by running the hotfix with the /x option on a system running Windows NT 4.0. This extracts the files without installing the fix).



4. Change the attributes of the Setup.log file on the ERD (use the attrib - s -h -r Setup.log command).



5. Add the following information to the BEGINNING of the section:
   

   
      [Files.WinNt]:
   
         \Winnt\System32\Win32k.sys = "win32k.sys","12d370","\","nt40 repair
         disk","win32k.sys" 




6. Run the Emergency Repair Procedure, verifying system files only.



7. When prompted, replace the Win32k.sys file.



8. After replacing the Win32k.sys file, exit setup. This leaves the other files intact.



9. Restart the system.

Additional query words: 0X1E

Keywords : ntstop NTSrvWkst
Version : WinNT:4.0
Platform : winnt
Issue type : kbprb