Stop 0x0000000A in Ndiswan.sys with Digiboard ISDN Board

ID: Q174509

The information in this article applies to:

Microsoft Windows NT Server version 4.0
Microsoft Windows NT Server version 4.0, Terminal Server Edition

SYMPTOMS

After you install Service Pack 3 on a Windows NT 4.0 RAS server using the Digiboard ISDN RAS board, the server will display a blue screen error message with the following STOP code:

STOP 0x0000000A (0x0000048, 0x00000000, 0x000000002, 0xf8d54f88)
IRQL_NOT_LESS_OR_EQUAL: 0xf8d54f88 has base at 0xf8d50000
NDISWAN.SYS.

NOTE: The first parameter will be the same each time.

CAUSE

Control block structures within the NDIS code were not being populated properly. The WAN miniport driver, Digipri.sys, lineup/linedown indications were not being handled correctly.

RESOLUTION

To resolve this problem, obtain the latest service pack for Windows NT 4.0 or Windows NT Server 4.0, Terminal Server Edition. For additional information, please see the following article in the Microsoft Knowledge Base:

Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack

STATUS

Microsoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition. This problem was first corrected in Windows NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition Service Pack 4.

Keywords : NT4SP4Fix ntstop kbbug4.00 kbfix4.00.sp4 NTSrv
Version : WinNT:4.0
Platform : winnt
Issue type : kbbug