RAS Error 718 When Using Motorola ISDN BitSURFR Pro EZ

ID: Q181546

The information in this article applies to:
  • Microsoft Windows NT Workstation version 4.0
  • Microsoft Windows NT Server version 4.0

SYMPTOMS

When you dial from a computer running Windows NT and using the Motorola ISDN BitSURFR Pro EZ in a Windows NT Remote Access Service (RAS) server, you may receive the following error message:

Error 718 - Timeout while waiting for valid response from remote peer


RESOLUTION

To resolve this issue, you will need to modify the initialization string being sent to the BitSURFR Pro EZ. Use the following steps:

  1. Click Start, point to Settings, and click Control Panel.


  2. Double-click Modems, select BitSURFR Pro EZ ISDN, and click Properties.


  3. Click the Connection tab and click Advanced.


  4. In the Extra settings field, type the following:

    AT%A2=95@M2=M


  5. In the Advanced Connection Settings dialog box, click OK.


  6. In the BitSURFR Pro EZ ISDN Properties dialog box, click OK.


  7. In the Modems Properties dialog box, click Close.




The Motorola ISDN BitSURFR Pro EZ modem is manufactured by Motorola, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

For information about how to contact Motorola, query in the Knowledge Base for one of the following articles:

ARTICLE-ID: Q65416
TITLE : Hardware and Software Third-Party Vendor Contact List, A-K

ARTICLE-ID: Q60781
TITLE : Hardware and Software Third-Party Vendor Contact List, L-P

ARTICLE-ID: Q60782
TITLE : Hardware and Software Third-Party Vendor Contact List, Q-Z

Keywords : kb3rdparty kberrmsg kbnetwork ntras ntnetserv NTSrvWkst
Version : WinNT:4.0
Platform : winnt
Issue type : kbprb


Last Reviewed: February 11, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.