Stop 0x0000002E Using Qlogic Driver Version 2.29

ID: Q193548

The information in this article applies to:

Microsoft Windows NT Workstation version 4.0
Microsoft Windows NT Server version 4.0
Microsoft Windows NT Server version 4.0, Terminal Server Edition

SYMPTOMS

When you use a Qlogic SCSI adapter (with the Qlogic driver version 2.29) and you modify the NumberofRequests registry value to a number greater than the default of 128, the system generates the following blue screen error message:

STOP: 0x0000002E (0xFACEFEED, 0x00000000, 0x00000000, 0x80ADD9C8)
DATA_BUS_ERROR

NOTE: The four parameters inside the parentheses will vary according to the configuration of the system.

This value does not normally appear in the registry and must be added manually to change the default setting of 128.

RESOLUTION

To resolve this problem, obtain the latest service pack for Windows NT 4.0 or Windows NT Server 4.0, Terminal Server Edition. For additional information, please see the following article in the Microsoft Knowledge Base:

Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack

This is scheduled to be included with SP4.

STATUS

Microsoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition. This problem was first corrected in Windows NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition Service Pack 4.

Additional query words: 4.00 stop 2e

Keywords : NT4SP4Fix ntstop kbbug4.00 kbfix4.00.sp4
Version : WinNT:4.0
Platform : winnt
Issue type : kbbug