The information in this article applies to:
SYMPTOMS
In the following configuration, after you log on and log off several
consecutive times, the network client receives an access denied error
message to one or more network drives located on the NetWare server. Also,
the NET USE command fails with the following error message:
This error message is followed by an access denied error message. The problem can be cleared on the Windows NT Workstation client by restarting Client Services for NetWare (CSNW). Configuration
NOTE: The same behavior is obtained using a NET USE command with the /persistent:no switch. CAUSEThe problem affects one or more drives and the drive where the desktop icons are located is always affected. The problem is intermittent and is easier to reproduce when using higher speed processors (200 MHz and more). RESOLUTION
The solution consists of removing a race condition that potentially exists,
especially when using high speed processors, between process cleanup and
WINLOGON deleting network connections. Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack STATUSMicrosoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition. This problem was first corrected in Windows NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition Service Pack 4. Additional query words: 4.00 error85
Keywords : NT4SP4Fix kbbug4.00 kbfix4.00.sp4 |
Last Reviewed: April 10, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |