The information in this article applies to:
SUMMARYPrinting to Print Performance Architecture (PPA) printers through Jet Direct boxes is fully supported, as long as the Jet Direct box is properly configured. MORE INFORMATIONThere are numerous error messages that can be generated from the an incorrectly configured Jet Direct box. A couple of common errors for an already defined printer, where the configuration was reset for a Jet Direct device, would be either of the following:
Problems can be as simple as a printout that is not formatted correctly to an inability to set up a remote port for the Jet Direct printer device. Common practice in trouble shooting printer problems should include a check on the Jet Direct's configuration. Each Jet Direct card will have its own method for verifying and changing the configuration of the Jet Direct devices. The steps are generally found in the owner's manual and most vendors now have Web sites where this information and any updates may be found at. For example Hewlett Packard's Web site has important information on configuration of its devices. Properly configured means the following:
For additional information, please see the following article(s) in the Microsoft Knowledge Base: Q153958 No Support for Print Performance Architecture under Windows NT Additional query words:
Keywords : kbprint |
Last Reviewed: March 12, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |