How to Configure Peer Networking In Windows NT 4.0

• Microsoft Windows NT Workstation version 4.0
• Microsoft Windows NT Server version 4.0

SUMMARY

This article describes how to install a small network (less than 10 computers) that does not require a Windows NT-based server or access to the Internet.

MORE INFORMATION

Windows NT is designed with built-in networking features that allow Windows NT-based computers to share resources such as files, printers, and some programs. A peer network is a network of computers that allows each user to control his or her own desktop settings, resource sharing, and security. There is no centralized control of security, no single logon environment, and no ability to maintain a roaming desktop environment (this requires a client/server network environment).

Windows NT 4.0-based workstations and servers have similar network interfaces. You can install a Windows NT-based server as a primary domain controller (PDC), a member server, or a stand-alone server. As a member server or a stand-alone server, a Windows NT Server-based computer acts as a peer with Windows NT-based workstations. When you install a Windows NT Server-based computer as a PDC, you can configure it to control network security and other settings for all the other Windows-based computers on the network. However, unless security is a priority, a PDC is generally not required until it becomes difficult to maintain the various security and resource settings configured on each peer computer. Windows NT-based computers can communicate with Microsoft Windows 98-based, Microsoft Windows 95-based, and Microsoft Windows 3.x-based computers when they have at least one common protocol installed and are using a Microsoft-compliant network redirector.

This article assumes that there is no network program that requires a specific protocol and that all the computers exist on one physical network, so that a router is not required. In this configuration, the NetBEUI protocol is appropriate

Installing a Simple NetBEUI Network

1. Determine that all the network adapters have Windows NT 4.0 drivers available. Use similar network adapters across the network, if possible.



2. Install Windows NT. During Setup, click to select the Yes, I am going to participate on a network and Wired to the network check boxes.



3. When Windows NT prompts you to search for the network adapter, click Select From A List, click Have Disk, place the floppy disk containing the network driver in drive A, and then click OK.



4. When you are prompted to select the protocols to install, click to clear the TCP/IP check box, and then click to select the NetBEUI check box.



5. Type a meaningful computer name when you are prompted, and then continue with the installation of Windows NT.



6. Repeat these steps for each computer on your network, typing a different and meaningful computer name for each computer.



7. Double-click Network Neighborhood to view other computers. Note that it may take up to several minutes for the computers to see each other the first time.

Setting Up Shares

1. Click Start, point to Programs, point to Administrative Tools (Common), and then click User Manager.



2. Double-click Guest, click to clear the Account Disabled check box, and then click OK.



3. Click Start, point to Programs, and then click Windows NT Explorer.



4. Right-click the drive that you want to share, click Properties, click the Sharing tab, click New Share, type the name of the drive, and then click OK.



5. Click Permissions, click Everyone, and then click Add. Note that the default rights for the Everyone group is Full Control. To change the rights for the Everyone group, click the appropriate rights in the Rights box.



6. Double-click one of the computers in Network Neighborhood to see the shares listed for that computer. If you share a drive, all the folders on the drive are also available.

Additional query words:

Keywords : kbenv kbnetwork
Version : winnt:4.0
Platform : winnt
Issue type : kbhowto