How to Restrict the Use of Certain Cryptographic Algorithms and Protocols in Schannel.dll

ID: Q245030

The information in this article applies to:

Microsoft Windows NT Server version 4.0
Microsoft Windows NT Server, Enterprise Edition version 4.0
Microsoft Windows NT Workstation version 4.0
Microsoft Internet Explorer version 5 for Windows NT 4.0
Microsoft Internet Information Server 4.0

IMPORTANT: This article contains information about editing the registry. Before you edit the registry, make sure you understand how to restore it if a problem occurs. For information about how to do this, view the "Restoring the Registry" Help topic in Regedit.exe or the "Restoring a Registry Key" Help topic in Regedt32.exe.

SUMMARY

This article describes how to restrict the use of certain cryptographic algorithms and protocols in the Schannel.dll file.

This information also applies to Independent Software Vendor (ISV) applications written for the Microsoft Cryptographic API on Windows NT 4.0.

MORE INFORMATION

The following Crypto Service Providers (CSPs) included with Windows NT 4.0 Service Pack 6 have been awarded the certificates for FIPS-140-1 crypto validation:

Microsoft Base Cryptographic Provider (Rsabase.dll)

Microsoft Enhanced Cryptographic Provider (Rsaenh.dll) [non-export version]

Microsoft TLS/SSL Security Provider, the Schannel.dll file, uses the CSPs listed above to conduct secure communications over SSL or TLS in its support for Microsoft Internet Explorer and Internet Information Server (IIS).

You can modify the Schannel.dll file to support Cipher Suite 1 and 2, but the program must also support Cipher Suite 1 and 2. Cipher Suite 1 and 2 are not supported in IIS 4.0 and 5.0.

This article provides the necessary information to configure the Windows NT 4.0 Service Pack 6 TLS/SSL Security Provider. You can use the Windows NT registry to control the use of specific SSL 3.0 or TLS 1.0 cipher suites respect to the cryptographic algorithms supported by Microsoft Base or Enhanced Cryptographic Provider.

NOTE: In Windows NT 4.0 Service Pack 6, the Schannel.dll file does not use the Microsoft Base DSS Cryptographic Provider (Dssbase.dll) or the Microsoft DS/Diffie-Hellman Enhanced Cryptographic Provider (Dssenh.dll).

Cipher Suites

Both SSL 3.0 (http://home.netscape.com/eng/ssl3/draft302.txt), and TLS 1.0 (RFC2246) with INTERNET-DRAFT "56-bit Export Cipher Suites For TLS draft-ietf-tls-56-bit-ciphersuites-00.txt" provide options to use different cipher suites. Each cipher suite determines the key exchange, authentication, encryption, and MAC algorithms used within a SSL/TLS session. Note that when you use RSA as both key exchange and authentication algorithms, the term RSA appears only once in the corresponding cipher suite definitions.

The Windows NT 4.0 Service Pack 6 Microsoft TLS/SSL Security Provider supports the following "CipherSuite" defined in SSL 3.0 when you use the Microsoft Base or Enhanced Cryptographic Provider:

SSL_RSA_EXPORT_WITH_RC4_40_MD5 { 0x00,0x03 }

SSL_RSA_WITH_RC4_128_MD5 { 0x00,0x04 }

SSL_RSA_WITH_RC4_128_SHA { 0x00,0x05 }

SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5 { 0x00,0x06 }

SSL_RSA_WITH_DES_CBC_SHA { 0x00,0x09 }

SSL_RSA_WITH_3DES_EDE_CBC_SHA { 0x00,0x0A }

SSL_RSA_EXPORT1024_WITH_DES_CBC_SHA { 0x00,0x62 }

SSL_RSA_EXPORT1024_WITH_RC4_56_SHA { 0x00,0x64 }

NOTE: Neither SSL_RSA_EXPORT1024_WITH_DES_CBC_SHA nor SSL_RSA_EXPORT1024_WITH_RC4_56_SHA is defined in SSL 3.0 text. However, a number of SSL 3.0 vendors, including Microsoft, support them.

Windows NT 4.0 Service Pack 6 Microsoft TLS/SSL Security Provider also supports the following "CipherSuite" defined in TLS 1.0 when using Microsoft Base or Enhanced Cryptographic Provider:

TLS_RSA_EXPORT_WITH_RC4_40_MD5 { 0x00,0x03 }

TLS_RSA_WITH_RC4_128_MD5 { 0x00,0x04 }

TLS_RSA_WITH_RC4_128_SHA { 0x00,0x05 }

TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5 { 0x00,0x06 }

TLS_RSA_WITH_DES_CBC_SHA { 0x00,0x09 }

TLS_RSA_WITH_3DES_EDE_CBC_SHA { 0x00,0x0A }

TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA { 0x00,0x62 }

TLS_RSA_EXPORT1024_WITH_RC4_56_SHA { 0x00,0x64 }

NOTE: A cipher suite defined with the first byte "0x00" is non-private and is used for open interoperable communications. As such, the Windows NT 4.0 Service Pack 6 Microsoft TLS/SSL Security Provider follows the procedures for using these cipher suites as specified in SSL 3.0 and TLS 1.0 specifications to ensure interoperability.

Schannel Specific Registry Keys

WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

For information about how to edit the registry, view the "Changing Keys and Values" Help topic in Registry Editor (Regedit.exe) or the "Add and Delete Information in the Registry" and "Edit Registry Data" Help topics in Regedt32.exe. Note that you should back up the registry before you edit it. If you are running Windows NT, you should also update your Emergency Repair Disk (ERD).

SCHANNEL Key

Start Registry Editor (Regedt32.exe), and locate the following key in the registry.

HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/SecurityProviders/SCHANNEL

SCHANNEL/Protocols SubKey

The Protocols registry key under the SCHANNEL key is used to control the use of protocols supported by the Schannel.dll file and to restrict the protocols use to the TLS server or TLS client.

To prohibit the use of the protocols other than SSL 3.0 or TLS 1.0, change the DWORD value data of the Enabled value to 0x0 in each of the following registry keys under the Protocols key:

SCHANNEL/Protocols/PCT 1.0\Client

SCHANNEL/Protocols/PCT 1.0\Server

SCHANNEL/Protocols/SSL 2.0\Client

SCHANNEL/Protocols/SSL 2.0\Server

WARNING: The Microsoft Message Queue currently uses only PCT 1.0 between clients and servers. If you disable PCT 1.0, MSMQ does not function correctly.

WARNING: The Enabled value in the registry keys under the Protocols key take precedence over the grbitEnabledProtocols value defined in the SCHANNEL_CRED structure containing the data for an Schannel credential. The default behavior is enabled if you do not configure the Enabled value.

SCHANNEL/Ciphers Subkey

The Ciphers registry key under the SCHANNEL key is used to control the use of symmetric algorithms such as DES or RC4. The following are valid registry keys under the Ciphers key.

SCHANNEL/Ciphers/RC4 128/128 Subkey:

RC4 128/128

This subkey refers to 128-bit RC4.

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0. If you do not configure the Enabled value, the default is enabled. This registry key does not apply to an exportable server that does not possess an SGC certificate.

Disabling this algorithm effectively disallows:

SSL_RSA_WITH_RC4_128_MD5

SSL_RSA_WITH_RC4_128_SHA

TLS_RSA_WITH_RC4_128_MD5

TLS_RSA_WITH_RC4_128_SHA

SCHANNEL/Ciphers/Triple DES 128/128 Subkey:

Triple DES 168/168

This registry key refers to 168-bit Triple DES as specified in ANSI X9.52 and Draft FIPS 46-3. This registry key does not apply to the export version.

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD data to 0x0. If you do not configure the Enabled value, the default is enabled.

Disabling this algorithm effectively disallows:

SSL_RSA_WITH_3DES_EDE_CBC_SHA

SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA

TLS_RSA_WITH_3DES_EDE_CBC_SHA

TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA

SCHANNEL/Ciphers/RC2 128/128 Subkey:

RC2 128/128

This registry key refers to 128-bit RC2. It does not apply to the export version.

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0. If you do not configure the Enabled value, the default is enabled.

SCHANNEL/Ciphers/RC4 64/128 Subkey:

RC4 64/128

This registry key refers to 64-bit RC4. It does not apply to the export version (but is used in Microsoft Money).

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0. If you do not configure the Enabled value, the default is enabled.

SCHANNEL/Ciphers/RC4 56/128 Subkey:

RC4 56/128

This registry key refers to 56-bit RC4.

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0. If you do not configure the Enabled value, the default is enabled.

Disabling this algorithm effectively disallows:

TLS_RSA_EXPORT1024_WITH_RC4_56_SHA

SCHANNEL/Ciphers/RC2 56/128 Subkey:

RC2 56/128

This registry key refers to 56-bit RC2.

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0. If you do not configure the Enabled value, the default is enabled.

SCHANNEL/Ciphers/RC2 56/56 Subkey:

DES 56/56

This registry key refers to 56-bit DES as specified in FIPS 46-2. Its implementation in the Rsabase.dll and Rsaenh.dll files has been validated under the FIPS 140-1 Cryptographic Module Validation Program.

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0. If you do not configure the Enabled value, the default is enabled.

Disabling this algorithm effectively disallows:

SSL_RSA_WITH_DES_CBC_SHA

TLS_RSA_WITH_DES_CBC_SHA

SCHANNEL/Ciphers/RC4 40/128 Subkey:

RC4 40/128

This refers to 40-bit RC4.

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0. If you do not configure the Enabled value, the default is enabled.

Disabling this algorithm effectively disallows:

SSL_RSA_EXPORT_WITH_RC4_40_MD5

TLS_RSA_EXPORT_WITH_RC4_40_MD5

SCHANNEL/Ciphers/RC2 40/128 Subkey:

RC2 40/128

This registry key refers to 40-bit RC2.

To allow this cipher algorithm, change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0. If you do not configure the Enabled value, the default is enabled.

Disabling this algorithm effectively disallows:

SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5

TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5

SCHANNEL/Ciphers/NULL Subkey:

NULL

This registry key means no encryption. It is turned off by default.

To turn off encryption (disallow all cipher algorithms), change the DWORD value data of the Enabled value to 0xffffffff, otherwise change the DWORD value data to 0x0.

SCHANNEL/Hashes Subkey

The Hashes registry key under the SCHANNEL key is used to control the use of hashing algorithms such as SHA-1 or MD5. The following are valid registry keys under the Hashes key.

SCHANNEL/Hashes/MD5 Subkey:

MD5

To allow this hashing algorithm, change the DWORD value data of the Enabled value to the default value 0xffffffff, otherwise change the DWORD value data to 0x0.

Disabling this algorithm effectively disallows:

SSL_RSA_EXPORT_WITH_RC4_40_MD5

SSL_RSA_WITH_RC4_128_MD5

SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5

TLS_RSA_EXPORT_WITH_RC4_40_MD5

TLS_RSA_WITH_RC4_128_MD5

TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5

SCHANNEL/Hashes/SHA Subkey:

SHA

This registry key refers to Secure Hash Algorithm (SHA-1), as specified in FIPS 180-1. Its implementation in the Rsabase.dll and Rsaenh.dll files has been validated under the FIPS 140-1 Cryptographic Module Validation Program.

To allow this hashing algorithm, change the DWORD value data of the Enabled value to the default value 0xffffffff, otherwise change the DWORD value data to 0x0.

Disabling this algorithm effectively disallows:

SSL_RSA_EXPORT_WITH_RC4_40_MD5

SSL_RSA_WITH_RC4_128_MD5

SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5

TLS_RSA_EXPORT_WITH_RC4_40_MD5

TLS_RSA_WITH_RC4_128_MD5

TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5

SCHANNEL/KeyExchangeAlgorithms Subkey

The KeyExchangeAlgorithms registry key under the SCHANNEL key is used to control the use of key exchange algorithms such as RSA. The following are valid registry keys under the KeyExchangeAlgorithms key.

SCHANNEL/KeyExchangeAlgorithms/PKCS Subkey:

PKCS

This registry key refers to the RSA as the key exchange and authentication algorithms.

To allow RSA, change the DWORD value data of the Enabled value to the default value 0xffffffff, otherwise change the DWORD data to 0x0.

Disabling RSA effectively disallows all RSA-based SSL and TLS cipher suites supported by the Windows NT4 SP6 Microsoft TLS/SSL Security Provider.

FIPS 140-1 Cipher Suites

You may want to use only those SSL 3.0 or TLS 1.0 cipher suites that correspond to FIPS 46-3 or FIPS 46-2 and FIPS 180-1 algorithms provided by the Microsoft Base or Enhanced Cryptographic Provider.

In this article, we refer to them as FIPS 140-1 cipher suites. Specifically, they are:

SSL_RSA_WITH_DES_CBC_SHA

SSL_RSA_WITH_3DES_EDE_CBC_SHA

SSL_RSA_EXPORT1024_WITH_DES_CBC_SHA

TLS_RSA_WITH_DES_CBC_SHA

TLS_RSA_WITH_3DES_EDE_CBC_SHA

TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA

To use only FIPS 140-1 cipher suites as defined above, supported by Windows NT 4.0 Service Pack 6 Microsoft TLS/SSL Security Provider with Microsoft Base or Enhanced Cryptographic Provider, configure the DWORD value data of the Enabled value in the following registry keys to 0x0:

SCHANNEL/Ciphers/RC4 128/128

SCHANNEL/Ciphers/RC2 128/128

SCHANNEL/Ciphers/RC4 64/128

SCHANNEL/Ciphers/RC4 56/128

SCHANNEL/Ciphers/RC2 56/128

SCHANNEL/Ciphers/RC4 40/128

SCHANNEL/Ciphers/RC2 40/128

SCHANNEL/Ciphers/NULL

SCHANNEL/Hashes/MD5

and configure the DWORD value data of the Enabled value in the following registry keys to 0xffffffff:

SCHANNEL/Ciphers/DES 56/56

SCHANNEL/Ciphers/Triple DES 168/168" [not applicable in export version]

SCHANNEL/Hashes/SHA

SCHANNEL/KeyExchangeAlgorithms/PKCS

Master Secret Computation Using FIPS 140-1 Cipher Suites

The procedures for using the above FIPS 140-1 cipher suites in SSL 3.0 are different from those for using (the above) FIPS 140-1 cipher suites in TLS 1.0.

In SSL 3.0, the following is the definition master_secret computation:


   master_secret =
   MD5(pre_master_secret + SHA('A' + pre_master_secret +
       ClientHello.random + ServerHello.random)) +
   MD5(pre_master_secret + SHA('BB' + pre_master_secret +
       ClientHello.random + ServerHello.random)) +
   MD5(pre_master_secret + SHA('CCC' + pre_master_secret +
       ClientHello.random + ServerHello.random));

In TLS 1.0, the following is the definition master_secret computation:


   master_secret = PRF(pre_master_secret, "master secret",
      ClientHello.random + ServerHello.random)

where:


   PRF(secret, label, seed) = P_MD5(S1, label + seed) XOR
      P_SHA-1(S2, label + seed)

Selecting the Option to Use Only FIPS 140-1 Cipher Suites in TLS 1.0:

Because of the above difference, customers may want to prohibit the use of SSL 3.0, even though the allowable set of cipher suites has been limited to only the subset of FIPS 140-1 cipher suites. In that case, change the DWORD value data of the Enabled value to 0x0 in each of the following registry keys under the Protocols key:

SCHANNEL/Protocols/SSL 3.0\Client

SCHANNEL/Protocols/SSL 3.0\Server

WARNING: The Enabled value data in these registry keys under the Protocols key take precedence over the grbitEnabledProtocols value defined in the SCHANNEL_CRED structure containing the data for an Schannel credential. The default Enabled value data is 0xffffffff.

Example Registry Files

Two examples of registry file content for purposes of configuration, Export.reg and Non-export.reg, are provided in this section of the article.

In a computer running Windows NT 4.0 Service Pack 6 with the exportable Rasbase.dll and Schannel.dll files, run Export.reg to ensure that only TLS 1.0 FIPS cipher suites are used by the computer.

In a computer running Windows NT 4.0 Service Pack 6 that includes the non-exportable Rasenh.dll and Schannel.dll files, run Non-export.reg to ensure that only TLS 1.0 FIPS cipher suites are used by the computer.

For the Schannel.dll file to recognize any changes under the SCHANNEL registry key, you must restart the computer.

To return the registry settings to default, delete the SCHANNEL registry key and everything under it. If these registry keys are not present, the Schannel.dll rebuilds the keys when you restart the computer.


------------------"export.reg"------------------------------------------
REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\DES 56/56]
"Enabled"=dword:ffffffff

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\NULL]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC2 128/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC2 40/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC2 56/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 128/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 40/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 56/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 64/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\Triple DES 168/168]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\SHA]
"Enabled"=dword:ffffffff

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\Diffie-Hellman]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\PKCS]
"Enabled"=dword:ffffffff

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"Enabled"=dword:ffffffff
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"Enabled"=dword:ffffffff

------------------"export.reg"------------------------------------------


------------------"non-export.reg"--------------------------------------
REGEDIT4

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\DES 56/56]
"Enabled"=dword:ffffffff

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\NULL]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC2 128/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC2 40/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC2 56/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 128/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 40/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 56/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 64/128]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\Triple DES 168/168]
"Enabled"=dword:ffffffff

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\SHA]
"Enabled"=dword:ffffffff

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\Diffie-Hellman]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\PKCS]
"Enabled"=dword:ffffffff

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Client]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\Multi-Protocol Unified Hello\Server]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
"Enabled"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"Enabled"=dword:ffffffff
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"Enabled"=dword:ffffffff

------------------"non-export.reg"--------------------------------------

Additional query words: sp6

Keywords : kbenv ntsecurity
Version : WINDOWS:5; winnt:4.0
Platform : WINDOWS winnt
Issue type : kbinfo