PRB: Performance Object Is Not Displayed in Performance Monitor

ID: Q248993

The information in this article applies to:
  • Microsoft Windows 2000
IMPORTANT: This article contains information about editing the registry. Before you edit the registry, make sure you understand how to restore it if a problem occurs. For information about how to do this, view the "Restoring the Registry" Help topic in Regedit.exe or the "Restoring a Registry Key" Help topic in Regedt32.exe.

SYMPTOMS

When using the Performance Monitor tool (or System Monitor Microsoft Management Console [MMC] snap-in) a performance object may unexpectedly fail to appear in the Performance Object drop-down list box in the Add To Chart dialog box.


CAUSE

The problem may occur because the extensible performance DLL is marked as "disabled".


RESOLUTION

The object may be reenabled by setting the "Disable Performance Counters" registry value in the Performance subkey of the supported service for the extension.


STATUS

This behavior is by design.


MORE INFORMATION

In versions of Windows NT prior to Windows 2000, one bad or defective performance DLL is able to render the performance monitoring features of the operating system inoperative. To maintain the integrity of the performance data and to improve reliability, the performance library of Windows 2000 disables any performance DLL that returns data in the incorrect format, causes an unhandled program fault, or takes too long to return the performance data (this is usually the cause of a library being disabled).

When a performance extension DLL is disabled, the performance counters provided by that DLL are not available through Performance Monitor or the Performance Data Helper API. Disabled DLLs are not reloaded when the system is restarted.

If a performance extension DLL becomes disabled unexpectedly, check the application event log for event 1017 or 1018 (the "disable" events) posted by the Perflib source. Then look for other events posted by Perflib that will give the reasons why the system disabled the extension. These events should be noted if you need to call technical support.

You can try reenabling the extension DLL. If the problem persists (that is, the system disables it again) you should contact the vendor of the extension. If the object is a Windows 2000 system object (such as the Process object) contact Microsoft Product Support Services (PSS).

To reenable an extension DLL, Microsoft recommends that you use the ExCtrlList utility from the Windows 2000 Resource Kit. Alternatively, you can use the Registry editor tool (Regedit.exe) that ships with Windows 2000.

Reenabling an Extension by Using ExCtrlLst

  1. Start Exctrlst.exe. This is a tool from the Windows 2000 Resource Kit.


  2. Select the first item in the Extensible Performance Counters list box.


  3. Inspect the Performance Counters Enabled checkbox that appears just below the list box. If the checkbox is selected, the counter is enabled. If it is cleared, then select the checkbox to reenable it.


  4. Select the next item in the Extensible Performance Counters list box and repeat the previous two steps until all items have the Performance Counters Enabled checkbox selected.


Reenabling an Extension by Using Regedit.exe

WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

For information about how to edit the registry, view the "Changing Keys and Values" Help topic in Registry Editor (Regedit.exe) or the "Add and Delete Information in the Registry" and "Edit Registry Data" Help topics in Regedt32.exe. Note that you should back up the registry before you edit it. If you are running Windows NT, you should also update your Emergency Repair Disk (ERD).
  1. Start Regedit.exe. (You cannot use Regedt32.exe because it does not allow searching for registry values.)


  2. Select the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services key.


  3. Select Find from the Edit menu.


  4. In the Find What field, type Disable Performance Counters.


  5. Click Find Next. This will locate a Performance key that may have this Registry value set to 1.


  6. If the Registry value is set to 1, set the value to 0 or delete the Registry value.


  7. Press F3 to find the next occurrence of this Registry value.


  8. Repeat the previous two steps until there are no Performance keys that have the Disable Performance Counters value set to 1.


Additional query words: perfmon missing

Keywords : kbKernBase kbWinOS2000 kbPerfMon kbDSupport kbGrpKernBase
Version : WINDOWS:
Platform : WINDOWS
Issue type : kbprb


Last Reviewed: February 3, 2000
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.