WFWG Err Msg: Network Busy

• Microsoft Windows for Workgroups versions 3.1, 3.11

SYMPTOMS

When you attempt to start the network redirector, connect to a network drive, printer, or any other network device, the following error message may be displayed:

Network Busy

CAUSE

The "Network Busy" error message is usually caused by some type of hardware problem; it is rarely caused by the network being busy. Below are the most common causes of this error message:

• Interrupt (IRQ) conflict



• I/O address conflict



• RAM address conflict



• DMA conflict



• Hub/Concentrator/Bridge/Router problem



• Problem with another computer on the network



• Disconnected or faulty cabling, connectors, or terminators



• Faulty network card (on the local or a remote computer)



• Incorrect Transceiver Type selection



• Duplicate computer name on network



• Incorrect network interface card (NIC) driver

Additional query words: 3.10 3.1 3.11 "the network is busy"

Keywords :
Version : WINDOWS:3.1,3.11
Platform : WINDOWS
Issue type :