MAIL.WRI from Windows for Workgroups 3.11
ID: Q109518
|
The information in this article applies to:
-
Microsoft Windows for Workgroups version 3.11
SUMMARY
The following information was taken from the Microsoft Windows for
Workgroups version 3.11 MAIL.WRI file.
MORE INFORMATION
Additional Notes About Using Mail with Microsoft Windows for
Workgroups Version 3.11
____________________________________________________________________
This document contains information about using Mail and administering
the Workgroup Post Office (WGPO). For additional information about
Microsoft Windows for Workgroups that does not pertain to Mail, see
"Other Online Documents" at the end of this document.
Using Write to View This Document
To make this document easier to read, you can enlarge the Write
window to its maximum size. To do so, click the Maximize button in
the upper-right corner of the window. Or open the Control menu in the
upper-left corner of the Write window (press ALT+SPACEBAR), and then
choose the Maximize command.
To move through the document, press PAGE UP or PAGE DOWN. Or click
the arrows at the top and bottom of the scroll bar along the right
side of the Write window.
To print the document, choose Print from the File menu.
For Help on using Write, press F1.
To read other online documents, choose Open from the File menu.
Contents
This document contains information about the following topics:
1.0 Using Mail
1.1 Frequency of Checking for New Mail and Sending Mail
1.2 Sending a Bitmap as an Attachment
1.3 Connecting to a Post Office on a Novell NetWare Server
1.4 Mail and Protocols
1.5 Setting Up Mail for Multiple Users on One Computer
2.0 Managing the Mail System Files
2.1 Changes Made to Files When You Create a WGPO
2.2 Recreating the Mail Initialization Procedure
2.3 Backing Up the MSMAIL.MMF File
2.4 Backing Up the MSMAIL.INI File
2.5 Restoring the MSMAIL.INI File
2.6 Creating and Accessing Other Message Files
3.0 Managing a Workgroup Post Office
3.1 Workgroup Post Office Share Names
3.2 Compressing Shared Folders
3.3 Postoffice Manager and the Post Office Administrator
3.4 Changes Made to Files When You Create a WGPO
3.5 Workgroup Post Office Must Be at the Root of Share
on Server
3.6 Setting Up a Post Office on Another Computer
3.7 Changing the Post Office Administrator
3.8 Changing the Name of Your Workgroup Post Office
3.9 Moving Your Workgroup Post Office
3.10 Removing Your Workgroup Post Office
4.0 Using Mail with Other Message Systems
5.0 Creating Schedule+ Resources
6.0 Other Online Documents
Microsoft and MS-DOS are registered trademarks and Windows is a
trademark of Microsoft Corporation.
AT&T Easylink is a service mark of American Telephone and Telegraph
Company.
AppleTalk is a registered trademark of Apple Computer, Inc.
Banyan is a registered trademark of Banyan Systems, Inc.
Dutch is a trademark of Bitstream, Inc.
CompuServe is a registered trademark of CompuServe, Inc.
Infonet is a registered trademark of Computer Sciences Corporation.
Data General is a registered trademark of Data General Corporation.
Da Vinci Systems is a trademark of Da Vinci Systems Corporation.
All-In-1, DEC, and VMS are registered trademarks of Digital Equipment
Corporation.
IBM, OfficeVision, and PROFS are registered trademarks of
International Business Machines Corporation.
cc:Mail is a trademark of cc:Mail, Inc., a wholly owned subsidiary of
Lotus Development Corporation.
Lotus Notes is a registered trademark of Lotus Development Corporation
Novell and NetWare are registered trademarks of Novell, Inc.
Retix is a registered trademark of Retix.
Soft-Switch is a trademark of Soft-Switch Inc.
Unisys is a registered trademark of Unisys Corporation.
UNIX is a registered trademark of UNIX Systems Laboratories.
WANG is a registered trademark of Wang Laboratories.
Paintbrush is a trademark of ZSoft Corporation.
1.0 Using Mail
This section discusses how to use Mail.
1.1 Frequency of Checking for New Mail and Sending Mail
The setting in the Options dialog box that determines how often Mail
checks for new messages also determines how often Mail checks the
Outbox for messages to submit to the post office. A message first
waits in the Outbox for the amount of time specified, and then waits
again for the same amount of time until Mail checks for new messages.
For example, if you specified that Mail should check for new messages
every three minutes, it can take up to six minutes before you receive
new mail.
If it takes longer than you expect to receive your messages, try
specifying a lower value.
1.2 Sending a Bitmap as an Attachment
In a mail message, if you include a bitmap that was created with
Paintbrush or another graphics application, the recipient may not be
able to view the bitmap if he or she is using a display adapter that
has a different resolution from yours.
1.3 Connecting to a Post Office on a Novell NetWare Server
When you connect to an existing WGPO by using Mail, Mail displays a
network-share browser which enables you to select the network server
and share on which the post office resides. For NetWare servers, you
must have previously attached to the server. Then, in the Network
Path box, you can specify the path to the post office directory.
1.4 Mail and Protocols
You must have the Microsoft Windows Network installed to use Mail to
communicate by electronic mail with others in your workgroup. Mail is
not dependent on any particular protocol.
1.5 Setting Up Mail for Multiple Users on One Computer
You can set up one computer so that more than one person can use Mail
on it. A separate .MMF file will be maintained for each user on the
Post Office computer. Note that there must be enough disk space
available on the Post Office computer for all inboxes that are stored
there.
The setup steps should be followed by the Post Office administrator.
For detailed information about the first four steps, refer to Chapter
4, "Mail" and Appendix A, "Maintaining Mail" in the Microsoft
Workgroup Add-On User's Guide.
To set up a computer for multiple Mail users:
1. Set up the Workgroup Post Office. The Post Office must be set up on a
different computer.
2. Set up the accounts for each user, rather than having each user set up
his or her own account.
3. Start Mail and logon using the mailbox name of the most frequent user.
The first account created is the default account name used when
starting Mail.
4. In the Welcome to Mail dialog box, select Connect to An Existing
Postoffice.
5. From the Mail menu, select Options.
6. Select the Server button.
7. In the Storage section, check the Postoffice check box, and then choose
OK.
8. From the Mail menu, select Exit and Sign Out.
One user can now use Mail.
9. Logon to Mail as each user, and repeat steps 5 through 8.
Once setup is complete, anyone who has been added by the administrator can
logon to Mail. The logon dialog box will display the mailbox name of the
first account created, so other users will need to type their mailbox name.
All users on the shared computer must Exit and Sign Out each time they
leave Mail.
2.0 Managing the Mail System Files
Each user and the WGPO has two Mail system files:
The message file: MSMAIL.MMF
The Mail file: MSMAIL.INI
The message file, MSMAIL.MMF, stores messages, message folders, and
the Personal Address Book. This file is updated as messages are
received.
The Mail file, MSMAIL.INI, controls the way Mail works.
Your MSMAIL.MMF and MSMAIL.INI files are located in the directory
where you set up Windows for Workgroups (the default is C:\WINDOWS).
When you create a WGPO or connect to a post office, these files are
automatically modified as described below. You need to edit the Mail
system files only when you want to change functionality or restore
these files to a particular state. For example, if you set up a WGPO
and then delete it, you need to modify your MSMAIL.INI file to
connect to a different post office.
2.1 Changes Made to Files When You Connect to a WGPO
When you connect to a WGPO, the following occurs:
The following commands are added to the [Microsoft Mail] section
of your MSMAIL.INI file, which is in the Windows directory:
ServerPath=\\computername\sharename
Login=mailbox_name
A message file is created for you. The default name is MSMAIL.MMF.
2.2 Recreating the Mail Initialization Procedure
When you first run Mail, you are given the option to connect to an existing
post office or create a new post office. After you make your selection, you
cannot go back and change your selection. Use the following procedure if
you chose to set up a new post office, and you did not want to.
To reinitialize the Mail initialization procedure:
1. Open the MSMAIL.INI file in an ASCII text editor, such as Notepad.
2. Disable the ServerPath= and the login= lines by typing a semicolon (;)
at the beginning of each line.
3. Add or edit the CustomInitHandler= line so that it appears as follows:
CustomInitHandler=WGPOMGR.DLL,10
4. Run Mail. The initialization procedure begins.
2.3 Backing Up the MSMAIL.MMF File
Since the MSMAIL.MMF file contains all your messages, you should back
it up regularly. For instructions on backing up and restoring the
MSMAIL.MMF file, see the Microsoft Workgroup Add-On User's Guide.
In some circumstances, Mail may encounter problems in the MSMAIL.MMF
file and you will be asked if you want Mail to repair the file. If
you choose Yes, Mail makes a backup copy of the MSMAIL.MMF file in
the Windows directory or in the directory specified by the MailTmp
parameter in the MSMAIL.INI file. Each time the file is repaired, a
new backup file is created. The first such backup file will be named
MSMAIL.BAK, and subsequent backup files will be named MSMAIL.001,
MSMAIL.002, and so on. You can delete these backup files.
2.4 Backing Up the MSMAIL.INI File
In general, you don't need to modify your MSMAIL.INI file; however,
you might want to restore it to a given state or alter it so that you
can change the way Mail works. If you do change your MSMAIL.INI file,
you should make a backup first.
Important: After altering the MSMAIL.INI file, you must restart Mail
for the changes to take effect.
To back up your MSMAIL.INI file:
1. In the Main group, choose the File Manager icon.
2. Select your MSMAIL.INI file. It is in the directory where you set up
Mail (the default is C:\WINDOWS).
3. From the File menu, choose Copy.
4. In the To box, type a name for your backup file—for example,
MSMAIL.OLD.
5. Choose the OK button.
To restore your MSMAIL.INI file, you can rename a backup copy, if you have
one, or you can edit your existing MSMAIL.INI file. How you edit the file
depends on whether you created a WGPO or connected to one.
2.5 Restoring the MSMAIL.INI File
To restore your MSMAIL.INI file after creating a WGPO:
If you made a backup copy of your MSMAIL.INI file, rename it as
MSMAIL.INI, and move it to the directory where you set up Mail (the
default is C:\WINDOWS).
If you don't have a backup copy, follow these steps:
1. Remove the following lines from the [Custom Commands] section of your
MSMAIL.INI file:
WGPOMgr1=3.0;Mail;;13
WGPOMgr2=3.0;Mail;&Postoffice Manager...;14;
WGPOMGR.DLL;0;;Manage Workgroup Postoffice;MSMAIL.HLP;2870
2. Remove the following lines from the [Microsoft Mail] section of the
MSMAIL.INI file:
ServerPath=drive:\directory
Login=mailbox_name
2.6 Creating and Accessing Other Message Files
You can create message files in addition to your primary message file by
using the Backup command or the Export Folders command.
To access these files, use the /f option to include the name of the file in
the Mail command line, as follows:
msmail.exe /f filename
Mail starts offline, and then opens the specified message file instead of
your primary message file. To revert to your primary message file, start
Mail without using the /f option.
3.0 Managing a Workgroup Post Office
3.1 Workgroup Post Office Share Names
The share name defined for a WGPO should not be longer than eight
characters, and must not include spaces.
3.2 Compressing Shared Folders
When compressing shared folders in the Postoffice Manager, the
administrator should ensure that the shared folders are not being
used by Mail users.
3.3 Postoffice Manager and the Post Office Administrator
Postoffice Manager is the program used by the post office
administrator to administer the WGPO. By default, Postoffice Manager
is installed on the computer of the person who creates the WGPO.
3.4 Changes Made to Files When You Create a WGPO
When you create a WGPO, the following occurs in the administrator account:
The WGPO directory is created in the specified location.
The following commands are added to the [Custom Commands]
section of the MSMAIL.INI file (which is in the Windows directory):
WGPOMgr1=3.0;Mail;;13
WGPOMgr2=3.0;Mail;&Postoffice Manager...;14;
WGPOMGR.DLL;0;;Manage Workgroup Postoffice;MSMAIL.HLP;2870
The Postoffice Manager command is added to the Mail menu on the
computer from which the WGPO was created. The commands appear only on
the Mail menu on this computer. To run Postoffice Manager on another
computer, you must add the commands to the MSMAIL.INI file on that
computer and delete them from the original computer.
The following commands are added to the [Microsoft Mail] section
of the MSMAIL.INI file:
ServerPath=drive:\directory
Login=mailbox_name
A message file is created for the administrator account. The
default filename is MSMAIL.MMF.
3.5 Workgroup Post Office Must Be at the Root of Share on Server
If you create a WGPO on a Microsoft Windows NT, LAN Manager, or
similar network server, you must define a share on that server that
has the WGPO directory as its root. When users run Mail to connect to
a post office on the network, they can select only a post office that
resides in the root of the share, not one in a subdirectory of the
share.
3.6 Setting Up a Post Office on Another Computer
The WGPO can be set up on another computer across the network.
For the following procedure, assume these conditions are true:
The post office is set up and administered from computer 1, a
Windows for Workgroups computer. The user on computer 1 is the post
office administrator. Postoffice Manager runs on computer 1.
The post office files are actually kept on computer 2, a computer
with server/sharing capabilities such as one running Windows for
Workgroups, Windows NT, LAN Manager, or Novell NetWare.
NOTE: Novell servers require some special attention. Refer to the
"Creating a WGPO on a Novell NetWare Server" section in this file.
To set up a post office on another computer, the designated
administrator of the WGPO should carry out the following procedure:
1. On computer 1, from the Main group, start Mail.
2. Choose Create A New Workgroup Postoffice.
3. To connect to computer 2, choose the Network button.
If computer 2 is running Windows for Workgroups, Windows NT, or is a LAN
Manager server, type the server name and share name (\\server\share) where
you want the post office created, and then choose the OK button. You must
have access rights to the server and the share.
If computer 2 is a Novell server, you must be logged onto the Novell server
and have the correct permissions. Then, connect to the server and use one
of these conventions:
server/share:directory
\\server\share\directory
remapped drive:\directory
4. After the WGPO is established, check to ensure that it is shared
properly on computer 2.
3.7 Changing the Post Office Administrator
You can transfer WGPO administrator responsibilities from one person
to another. In this procedure, the following conventions are used:
Admin1 is the current Post Office Administrator.
Admin2 will become the new Post Office Administrator.
The following fields are required:
Name:
Mailbox:
Password: (You must know the passwords for Admin1 and Admin2.)
To change administrators:
1. Copy the MSMAIL.INI file from the WGPO computer to a floppy disk so
that you can use it later when establishing the Admin2 account.
2. From Admin1's computer, sign on to Mail, select the Mail option, then
select Postoffice Manager.
3. Select the Details option, and write down the required information for
Admin1 and Admin2 (obtain the passwords from the Administrators;
passwords don't appear in the details dialog box).
4. Admin1 should delete the user account for Admin2 and edit the details
of the Admin1 account so that it matches the new Post Office
Administrator's account (Admin2).
5. Open Admin1's MSMAIL.INI file in a text editor (such as Notepad) and
remove the following lines from the end of the [Custom Commands]
section:
WGPOMgr1=3.0;Mail;;13
WGPOMgr2=3.0;Mail;&Postoffice Manager...;14;
WGPOMGR.DLL;0;;ManageWorkgroup Postoffice;MSMAIL.HLP;2870
6. Admin1 should exit and sign out of Mail.
7. On Admin2's computer, open the MSMAIL.INI file that was copied to the
floppy disk. Using a text editor (such as Notepad) cut the following
lines from this file:
WGPOMgr1=3.0;Mail;;13
WGPOMgr2=3.0;Mail;&Postoffice Manager...;14;
WGPOMGR.DLL;0;;ManageWorkgroup Postoffice;MSMAIL.HLP;2870
Then, paste these lines into the [Custom Commands] section of
Admin2's MSMAIL.INI file (located in the Windows directory). Be sure
that these lines are the last lines in the [Custom Commands] section.
8. Save the changes made to the MSMAIL.INI file, then start Mail.
NOTE: A message may appear that states Mail was unable to find your .MMF
file. A dialog box then appears that displays the .MMF file that was
detected. Select the detected .MMF file and then choose the OK button.
9. Open Mail and select the Mail option to verify that Postoffice
Administrator is now available on Admin2's computer.
10.If necessary, create a user account for Admin1.
3.8 Changing the Name of Your Workgroup Post Office
Before you rename your WGPO, inform members of your workgroup that they
will not be able to exchange messages until they reconnect to the renamed
WGPO.
To rename your WGPO:
1. Ask all people in your workgroup to quit and sign out of Mail.
2. In the Main group, choose the File Manager icon.
3. Select the WGPO directory.
4. On the toolbar, click the Share As button. Or choose Share As from the
Disk menu.
5. In the Share Name box, type the new name for your WGPO, and then choose
the OK button.
6. Edit the following line in the [Microsoft Mail] section of your
MSMAIL.INI file to reflect the new name of the WGPO:
ServerPath=drive:\directory
or
ServerPath=\\computername\sharename
7. If your shared directory has a password, you need to delete or edit the
line specifying the password for the shared directory.
8. Inform people in your workgroup of the new name, and ask them to edit
the following line in the [Microsoft Mail] section of their MSMAIL.INI
file to reflect the new name of the WGPO:
ServerPath=\\computername\sharename
They may also need to delete or edit a line specifying a password for the
shared directory.
3.9 Moving Your Workgroup Post Office
You may need to move your WGPO to a different directory—for example,
if the computer on which you set up the WGPO runs out of disk space.
Before you move your WGPO, inform people in your workgroup that they
will not be able to exchange messages until they reconnect to the
relocated post office.
To move your WGPO:
1. Ask all people in your workgroup to quit and sign out of Mail.
2. In the Main group, choose the File Manager icon.
3. Select the WGPO directory.
4. From the File menu, choose Move.
5. In the To box, type the new path for your WGPO, and then choose the OK
button.
6. Share your WGPO.
7. Edit the following line in the [Microsoft Mail] section of your
MSMAIL.INI file to reflect the new location of the WGPO:
ServerPath=drive:\directory
or
ServerPath=\\computername\sharename
8. If your shared directory has a password, you need to delete or edit the
line specifying the password for the shared directory.
9. Inform people in your workgroup of the new location for the WGPO, and
ask them to edit the following line in the [Microsoft Mail] section of
their MSMAIL.INI file to reflect the new location of the WGPO:
ServerPath=\\computername\sharename
They may also need to delete or edit a line specifying a password for the
shared directory.
3.10 Removing Your Workgroup Post Office
You may need to remove a WGPO that you have just created, and then
re-create it. Before you remove your WGPO, inform people in your
workgroup that they will not be able to exchange messages until they
reconnect to a new post office.
To delete your WGPO:
1. In the Main group, choose the File Manager icon.
2. Delete the WGPO directory.
3. Delete the following lines from the [Custom Commands] section of your
MSMAIL.INI file:
WGPOMgr1=3.0;Mail;;13
WGPOMgr2=3.0;Mail;&Postoffice Manager...;14;
WGPOMGR.DLL;0;;Manage Workgroup Postoffice;MSMAIL.HLP;2870
4.0 Using Mail with Other Message Systems
To connect a workgroup post office to another workgroup post office,
you must purchase Microsoft Mail Postoffice Upgrade for Windows for
Workgroups for each post office. To connect to another message
system, such as X.400 or SMTP, the Microsoft Mail Postoffice Upgrade
is required, as well as the gateway software which enables the two
message systems to exchange information.
Each message system can connect to the workgroup post office by using
one or more specific gateways. The following table is a partial list
of the Microsoft gateways needed for various message systems. If you
use one of the message systems listed in this table, you need to
purchase the appropriate gateway.
Additional gateways that use the Microsoft Mail File Format API may
also be available. If you are interested in a message system or
gateway that is not listed, contact your local Microsoft subsidiary.
Message system Gateway
ARCOM 400 Swiss PTT X.400
AT&T a Easylink X.400
AT&T Mail X.400 or AT&T Gateway
Atlas 400 X.400 (NF mark from Afnor)
Banyana Mail MHS or X.400
Beyond Mail MHS
cc:Mail X.400, MHS, SMTP, or Office Vision*
CompuServe SMTP or MHS
The Coordinator MHS
Data Generala CEO X.400
DaVincia MHS
DECa All-In-1 X.400, PROFS, SNADS, or SMTP
DEC VMSA Mail X.400 or SNADS
Dutcha PTT X.400
Envoy 100/Gemdes X.400
Fax Fax
Fischer International X.400 or SNADS
Gold 400 UK X.400
Higgins MHS
IBMA AS/400 Office SNADS, or through PROFS Distribution
Manager, if you have a VM host
IBM System 36 PROFS/OV
IBM CMS NOTES PROFS
IBM DISOSS SNADS
IBM OfficeVision. MVS SNADS, or through PROFS Distribution
Manager, if you have a VM host
IBM PROFS PROFS
Infonet X.400
Internet SMTP
Lotus Notes MHS, or the MS Mail-Notes Gateway built by
Phoenix Systems, distributed by Corporate
Software
Mail for AppleTalk Microsoft Mail connection
NCR Corporation X.400, or in some cases, the AT&T Gateway
Novell NetWare MHS
Retix X.400
Soft-Switch Central SNADS
Sprint TeleMail X.400
Telebox 400 German PTT X.400
Touch X.400
Unisys X.400
UNIX SMTP SMTP (SMTP is a part of TCP/IP, not a part of
Unix. You can also have SMTP origination to a
VAX or IBM host.)
UUCP SMTP (requires connectivity to an SMTP host,
which acts as a router to UUCP)
Verimation Memo SNADS
WANG Office MHS, X.400, or PROFS
5.0 Creating Schedule+ Resources
To create a Schedule+ resource (for a conference room, overhead
projector, or other shared equipment), the Post Office Administrator
must do the following:
1. Create a Mail account for that resource by using the Postoffice Manager
command on the Mail menu.
2. Exit and sign out of Mail.
3. Sign in to Mail and Schedule+ by using the mailbox name and password
that correspond to the resource.
4. From the Schedule+ Options menu, choose the General Options command.
5. Select "This account is for a resource," and then choose the OK button.
6. Quit Mail and Schedule+ by choosing Exit & Sign Out from the Schedule+
File menu.
If you will be setting up resources from a computer that is used by another
Mail account, this process will require you to sign in as multiple Mail
users on the same computer. Resources do not receive mail, so in most cases
there is no need to maintain separate message files for them. Therefore, if
you are setting up resources on a computer that is used by only one other
mail user (or no other mail users), set the passwords for all the accounts
on that computer to be the same. You will be able to sign in as any of the
accounts.
6.0 Other Online Documents
The following table describes other online documents that contain
important information about Windows for Workgroups that is not
included in the printed documentation or in Help:
Document Contains
______________________________________________________________________
SETUP.TXT - Information about problems that may occur when you set up
Windows for Workgroups.
MAIL.WRI - Information about the MSMAIL.INI file and other Mail
administration information.
PRINTERS.WRI - Information about specific printers and fonts.
NETWORKS.WRI - Information about running Windows for Workgroups with
specific network configurations.
README.WRI - Information about using Windows for Workgroups with the
Multimedia Extensions version 1.0, specific display-adapter
and system configurations, and MS-DOS–based applications, and
information that was unavailable when the documentation was
printed.
SYSINI.WRI - Information about the settings in the SYSTEM.INI file.
WININI.WRI - Information about the settings in the WIN.INI file.
Additional query words:
wfw wfwg 3.11
Keywords :
Version : WINDOWS:3.11
Platform : WINDOWS
Issue type :