WFWG RAS: Optional Modifiers and Dialing Strings
ID: Q113282
|
The information in this article applies to:
-
Microsoft Windows for Workgroups version 3.11
SUMMARY
The following information explains the dialing modifiers used in the
Microsoft Windows for Workgroups Remote Access Services (RAS) client.
MORE INFORMATIONTouch-Tone Dialing and Pulse/Rotary Dialing
By default, Windows for Workgroups RAS uses your current telephone system
format for dialing (either touch-tone or pulse/rotary dialing). It may be
necessary to use touch-tone only, pulse/rotary only, or both to get an
outside line on some telephone systems.
Use the following information to switch between dialing scripts when
you enter numbers to dial:
- The letter "T" switches from pulse/rotary to touch-tone dialing.
Example: If you are dialing from a telephone system that supports
pulse/rotary dialing and you need to enter a touch-tone format for a
calling card, the dial string is 555-5678T1234. Every digit after the
"T" is in touch-tone format.
- The letter "P" switches from touch-tone to pulse/rotary dialing.
Example: If you are dialing from a telephone system that supports
touch-tone dialing but it is connected to the telephone company through
pulse/rotary dialing, the dial string is 123P555-5678. The "123" prefix
tones may be used to access specific in-house functions or access
specific telephone lines. Every digit after the "P" is in pulse/rotary
format.
- You can use the "T" and "P" switches together to switch between formats.
Example: 555-1234P123T456 (tone-pulse-tone)
Telephone Number Modifiers for RAS
The following telephone-number modifiers are used to help get an outside
line on some telephone systems.
- The comma (,) causes the dialing to pause briefly (two seconds for most
modems) before continuing.
Example: 9,555-1234. The "9" is used on some telephone systems to get
an outside line. The comma inserts a pause before dialing the
telephone number. You can use as many commas as needed to create a
longer pause before the telephone number is dialed.
- The at sign (@) waits for extended silence before continuing. This
symbol causes the modem to listen to silence for five seconds. If a
five-second silence has not been detected within the period predefined
in the BIOS S7 register of the modem (the default is 50 seconds), the
modem disconnects. If five seconds of silence are detected, the modem
continues dialing the dial string.
Example: 9@555-1212
- The letter "W" waits for a dial tone before continuing (for modems
operating at 2400 bits per second [BPS] or greater). This dial modifier
causes the modem to wait for an additional dial tone before dialing the
numbers that follow the "W." The length of time the modem waits is up to
the value in the BIOS S7 register of the modem (the default is 50
seconds). The modem can be instructed to dial through a private branch
exchange (PBX) or a long-distance calling service that requires delays
during dialing.
Example: 9W555-1212. The "9" accesses the outside (public) telephone
line. The "W" causes the modem to wait 50 seconds for a secondary
dial tone (unless the default value in the BIOS S7 register of the
modem has been changed). Then the 555-1212 telephone number is
dialed.
Additional query words:
3.11 remote access service info tshoot phone number
Keywords :
Version : WINDOWS:3.11
Platform : WINDOWS
Issue type :
|