Err Msg: Ring 0 Systems. Virtual 16550 Driver...

ID: Q117668

The information in this article applies to:

Microsoft Windows for Workgroups versions 3.1, 3.11
Microsoft Windows versions 3.1, 3.11, 95

SYMPTOMS

You receive the following error message when you start Windows:

Ring 0 Systems. Virtual 16550 Driver Board was not found in computer. Virtual 16550 & communication buffering in the DOS box will not work. It may cause lost bytes during the data transfer and other problems with communication software running under V86 DOS

CAUSE

This error occurs when you:

Move your modem to another serial port without reconfiguring the driver.

-or-

Remove the modem from the computer but do not remove the corresponding Digicom Systems Incorporated (DSI) device driver (r0dsicom.drv). This device driver replaces COMM.DRV as the Windows serial communications driver and displays the error message noted above when it doesn't find the modem.

The following modems use DSI-written device drivers:

Boca Sound Expression 14.4 VSP

Cardinal Technologies MVP144DSP

DSI Connection Series

PC Logic FAX144DM

WORKAROUND

If you move the modem to another serial port, run the DSI.EXE program included with the modem to reconfigure the adapter. Contact DSI for more information and assistance.

If the modem has been removed, the DSI drivers should be replaced with the default Windows drivers to remove the error message.

The DSI setup program makes the following changes in the [boot] section of the SYSTEM.INI file:
```
     COMM.DRV=r0dsicom.drv 
```
To replace this DSI driver, change this line to read as follows:
```
     COMM.DRV=COMM.DRV 
```
The following changes are made to the [386Enh] section of the SYSTEM.INI file by the DSI setup program:
```
      DEVICE= r0dsivcd.386
      DEVICE= r0dsibuf.386
      DEVICE= r0dsimgr.386 
```
Remark out or remove the above three lines and add the following to the [386Enh] section:
```
      DEVICE=*VCD
      DEVICE=*combuff 
```
NOTE: The Connection Series modems require the drivers outlined above for full functionality. You should not replace the DSI drivers listed above unless the DSI modem is removed from the system. Contact DSI for more information.

MORE INFORMATION

The products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: ring zero one softmodem cardinal win95 win95x

Keywords : win31 wincomm wfwg
Version : WINDOWS:3.1,3.11,95
Platform : WINDOWS
Issue type :