Windows Err Msg: Cannot Find KRNLxxx.EXE

• Microsoft Windows for Workgroups versions 3.1, 3.11
• Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11, 95
• Microsoft Windows 98

SYMPTOMS

You may receive one of the following error messages when you try to start Windows or Windows for Workgroups:

Cannot find KRNL386.EXE

Cannot find KRNL286.EXE

Cannot find KRNL.EXE (version 3.0 only)

Cannot find or load required file KRNL386.EXE. The file was not found.

CAUSE

These messages indicate that Windows cannot find the kernel necessary to run 386 enhanced, standard, or real mode (version 3.0 only). The kernel provides system services such as memory and resource management.

This problem can also occur if the WIN386.EXE file is located in the Windows folder. This file is run by WIN.COM, causing Windows to belive the Windows folder is the Windows\System folder.

RESOLUTION

There are two methods for resolving this issue.

If Windows 95/98 Was Not Installed/Uninstalled

1. Boot with clean AUTOEXEC.BAT and CONFIG.SYS files.



2. Make sure that your Windows directory is on your MS-DOS path.



3. Make sure that your path statement does not contain more than 128 characters.



4. Make sure that the correct kernel file indicated in the warning message actually exists in your Windows SYSTEM subdirectory. If you are running a shared copy of Windows, make sure the file is in the shared Windows directory.



5. Add the Windows SYSTEM subdirectory to your MS-DOS path.



6. Make sure your MS-DOS version is compatible with your computer.



7. If you are using a shared installation of Windows on a network server, make sure that your personal Windows directory and the shared Windows directory are on your MS-DOS path and are listed in that order.



8. Ensure you don't have any upper memory block (UMB) conflicts. For more information, query on the following words in the Microsoft Knowledge Base:

   troubleshooting and emm386.exe 4.45




9. Rebuild the SYSTEM.INI file.



10. As a last resort, reinstall Windows.

If Windows 95/98 Was Installed/Uninstalled

1. Remove the WIN386.EXE file from the Windows folder. If there is no WIN386.EXE file in the Windows\System folder, move the file from the Windows folder to the Windows\System folder.



2. Restart the computer.



3. If these steps do not solve the problem, use the steps in the "If Windows 95/98 Was Not Installed/Uninstalled" section.

Additional query words: tshoot 3.00 3.0 3.00a 3.0a 3.10 3.1 3.11 kernel kernel286 kernel386 KRNL386 KRNL286 win31 wfw wfwg win95

Keywords : win31 win95 win30 win98 wfwg
Version : WINDOWS:3.0,3.0a,3.1,3.11,95
Platform : WINDOWS
Issue type : kbprb