README.TXT: Running Specific Windows Applications

• Microsoft Windows with Multimedia Extensions, version 1.0

SUMMARY

The following information is contained in the Windows with Multimedia Extensions version 1.0 README.TXT file. The Setup program copies this file to the Windows with Multimedia Extensions directory.

This information does not apply to later versions of Windows.

MORE INFORMATION

RUNNING SPECIFIC WINDOWS APPLICATIONS
=====================================

This section describes some problems you might have running some
Windows applications.

Control Panel
-------------

If you are running Windows 3.0 in real mode and using expanded memory,
a new desktop wallpaper selection will not take effect immediately.
You must quit and then restart Windows to see the new selection.

Print Manager and Network Printers
----------------------------------

The availability of several features in Print Manager depends on the
support provided by your Network software. The NETWORKS.TXT on-line
document contains important information about the networks you can use
with Windows and which features are available in Print Manager for
each network type. See NETWORKS.TXT for more information.

Using Terminal from the OS/2 DOS Compatibility Box
--------------------------------------------------

If you want Terminal to communicate through COM ports from the OS/2
DOS compatibility box, you must set the port before you start Windows.
To do so, you can run the SETCOM command from the DOS prompt or you
can include the initialization in your CONFIG.SYS file.

To set the COM port from the DOS prompt, type the following before you
start Windows:

   SETCOM40 COMx=ON

For example, if you want to use COM1, you would type the following
command:

   SETCOM40 COM1=ON

To set the COM port automatically, you can add a line in your
CONFIG.SYS file. See your OS/2 documentation for instructions.

Paintbrush
----------

You can print color images from Paintbrush only if you are using a
color POSTSCRIPT printer or an HP PaintJet printer. These are the only
printers that currently recognize Device Independent Bitmaps (DIBs),
the color file format Paintbrush uses.

In addition, when running Windows in real mode, you might receive
out-of-memory messages when you try to print. If so, try one of the
following:

 - Close all other applications and try printing again.

 - Save the Paintbrush file and exit Windows. Start Windows
   again in standard mode or 386 enhanced mode, and then print
   the Paintbrush file.

 - If you can run only in real mode, you can convert the color
   image and save it to a black and white format, then open
   the converted file, and print the monochrome bitmap. 

Additional query words: MMWIN kbmm 1.00 readme

Keywords :
Version : :1.0
Platform :
Issue type :