WFWG Err Msg: Memory Is Insufficient to Run KRNL386.EXE
ID: Q89839
|
The information in this article applies to:
-
Microsoft Windows for Workgroups versions 3.1, 3.11
SYMPTOMS
When you are running Novell NetWare connectivity under Windows for
Workgroups, you may receive one of the following error messages:
Memory is insufficient to run KRNL386.EXE
-or-
WINDOWMEMSIZE is too large in SYSTEM.INI
CAUSE
These error messages occur in the following situations:
- After you manually remove the Novell NetWare drivers from your
CONFIG.SYS and AUTOEXEC.BAT files instead of removing them using
Control Panel
-or-
- When you load PC Tools or PC-DOS RAMBoost from your AUTOEXEC.BAT file
If you remove the Novell NetWare drivers from the CONFIG.SYS and
AUTOEXEC.BAT files, the network card fails to bind because the PROTOCOL.INI
file is still set up for Novell connectivity.
NOTE: This problem may also occur if you run QEMM and load high. his may
also occur if HP Explorer is loading high.
WORKAROUND
If you are running QEMM and programs in the high memory area (HMA), try
loading the programs in low memory. If the symptoms persist, try using
HIMEM.SYS.
If you are running RAMBoost, remove the command from your AUTOEXEC.BAT file
and restart your computer.
To correctly remove Novell NetWare connectivity under Windows for
Workgroups version 3.1, do the following:
- Start Windows for Workgroups in standard mode. To do this, type win /s at the MS-DOS command prompt and then
press ENTER.
- Run Control Panel.
- Choose the Network icon.
- Choose the Networks button.
- Select Novell NetWare from the Other Networks In Use box.
- Choose the Remove button.
- Choose OK to save your changes.
To correctly remove Novell NetWare connectivity under Windows for
Workgroups version 3.11:
- Start Windows for Workgroups by using the WIN /N or WIN /D:T parameters.
- Run Network Setup from the Program Manager Network group.
- Choose the Networks button.
- Choose No Additional Network.
- Choose OK.
Additional query words:
3rdparty err msg 3.10 3.11 novell
Keywords :
Version : WINDOWS:3.1,3.11
Platform : WINDOWS
Issue type :