WFWG Err Msg: NET3651: There Is No Protocol Added...

ID: Q91114

The information in this article applies to:

Microsoft Windows for Workgroups version 3.1

SYMPTOMS

When the Microsoft LAN Manager directory is in the MS-DOS PATH statement before the Windows for Workgroups directory, you receive the following error message:

NET3651: There is no protocol loaded. A protocol is required to complete the command.

To avoid this error and retain network functionality in Windows for Workgroups, remove the LAN Manager from the PATH statement in the AUTOEXEC.BAT file.

CAUSE

Windows for Workgroups Setup looks for a PATH statement in the AUTOEXEC.BAT file and removes the LAN Manager directory. If the syntax of the PATH statement has been changed, Setup fails to recognize it and does not remove the LAN Manager directory.

Setup recognizes


   SET PATH=C:\DOS;C:\LANMAN.DOS\NETPROG;C:\WINDOWS

However, it does not recognize:


   PATH C:\DOS;C:\LANMAN.DOS\NETPROG;C:\WINDOWS

When the NET START command is executed from AUTOEXEC.BAT, LAN Manager's NET command is activated, causing the above error.

STATUS

Microsoft has confirmed this to be a problem in Windows for Workgroups version 3.1 and version 3.11. We are researching this problem and will post new information here as it becomes available.

Additional query words: 3.10 3.11

Keywords :
Version : WINDOWS:3.1
Platform : WINDOWS
Issue type :