WFWG Err Msg with an ATI Mach 32: \DEV\MS2000$ Error...

ID: Q95995

The information in this article applies to:

Microsoft Windows for Workgroups version 3.1

SYMPTOMS

When you use Microsoft Windows for Workgroups with a video card using the Mach 32 accelerator chip, the following error message appears during startup:

\DEV\MS2000$ Error: Hardware does not respond.

This problem occurs with various network and video cards.

CAUSE

WORKAROUND

With some network interface cards (NICs), you can work around this problem by changing the card from 16-bit mode to 8-bit mode. For example, the Artisoft AE2 and AE3 network cards can be placed in 8-bit mode with jumper W9. For specific instruction about changing this setting, refer to the documentation for the card. For more information, contact the card vendor.

MORE INFORMATION

The products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: 3.10 err msg 3rdparty adapter nic network interface Orchid 1280+ HP Vectra RS/20 AE3 1280 Acer acros 486/dx2 Gateway 2000 4DX-33 on-board Opti VGA chip set DanPex E-Net 16 bit card NE2000 clone 486/66 VESA Local-Bus Cirrus Logic GD 5422 E2 ZERO-1 Technology Company Limited local bus ATI Graphics Ultra Pro AMI bios 486/50 CNET diamond viper

Keywords :
Version : WINDOWS:3.1
Platform : WINDOWS
Issue type :