Compatibility Test For Windows 3.1 Checklist
ID: Q80903
|
The information in this article applies to:
-
Microsoft Windows Software Development Kit (SDK) 3.1
SUMMARY
This document provides the checklist that corresponds to the seven
articles titled "Windows 3.1 Application Compatibility." When you
follow the steps to test your application, load this document into a
word processor and complete the information requested. When testing is
complete, print this document and mail it, along with the printing
tests requested, to the address listed at the bottom of this document.
To find the "Windows 3.1 Application Compatibility" articles, search
this knowledge base on the words:
prod(winsdk) and 31compattest
Please be candid in your responses. We value your feedback.
The names of up to three people involved in testing the application
for compatibility can be entered into the Windows 3.1 Compatibility
Sweepstakes.
Application Name:
Version:
Shipment Date:
Company Name:
Address:
Representative: *
Phone:
Fax:
* Please name the person that Microsoft should contact with
information regarding the test results or problems.
General Instructions
Try each operation listed in each section (if it applies to your
application). Please include a description of the operations you tried
in the Comments section. Also include information about why you didn't
try an operation if this is the case.
Application Installation Programs
___Pass ___Fail Run your installation program from the MS-DOS prompt.
___Pass ___Fail Run your installation program from the MS-DOS prompt
under Windows.
___Pass ___Fail Run your installation program from the Run command in
the File menu of Program Manager.
Comments:
Windows Setup
___Pass ___Fail Install Microsoft Windows version 3.1 on a computer
with Windows version 3.0a and your application already
installed. Be sure to preserve your application's
WIN.INI and Program Manager settings.
Comments:
Shell Application
___Pass ___Fail Run your application as the shell. Exit Windows and be
sure that Windows terminates correctly.
Comments:
Windows Shell Applications
___Pass ___Fail Start your application from File Manager.
___Pass ___Fail Start your application from Program Manager.
___Pass ___Fail Start your application from the Startup group (copy
your application's icon to the group and restart
Windows).
___Pass ___Fail Start your application without the network installed.
___Pass ___Fail Start your application with the network installed.
___Pass ___Fail Drag a file from File Manager to your application.
___Pass ___Fail Drag a file associated with your application to Print
Manager.
___Pass ___Fail Check colors in your application when the system has
default colors.
___Pass ___Fail Check colors in your application when the system has
nondefault colors (for example, Arizona).
___Pass ___Fail Check colors in your application when the system
colors are customized.
___Pass ___Fail Use Windows version 3.1 Cardfile and Write to open and
view files that your application created.
___Pass ___Fail Use your application to open and read files that
Windows version 3.1 Cardfile and Write created and
that contain OLE objects.
Comments:
Multimedia and Sound
___Pass ___Fail Check all of your application's sound capabilities
when running in a virtual machine.
___Pass ___Fail Exit Windows and check all of your application's sound
capabilities when running under MS-DOS.
___Pass ___Fail Check all of your application's sound capabilities.
___Pass ___Fail Check all of your application's capabilities that
unusual drivers supply.
Comments:
Window Management
___Pass ___Fail Start your application in its default state. Maximize
and minimize it, making sure it paints correctly after
each operation.
___Pass ___Fail Move your application as far right and left as you can
in small increments, watching for repaint problems
each time you stop moving.
___Pass ___Fail Resize your application using the mouse to drag the
border.
___Pass ___Fail Minimize your application, starting another
application. Restore your application. Be sure it
paints correctly.
___Pass ___Fail Start your application with another Windows
application, such as one of the accessories. Bring the
accessory to the foreground, covering your
application. Switch back to your application. Be sure
it painted correctly.
___Pass ___Fail Start several applications. Use ALT+TAB to move
through them. Be sure your application repaints
correctly.
___Pass ___Fail Check all of your application's scrolling capabilities.
___Pass ___Fail Use the Program Manager to check memory and resource
usage before and after running your application. Be
sure available memory and resources are not lost.
___Pass ___Fail Examine your application code, and be sure there are
no dependencies on client area visibility when your
application is active.
___Pass ___Fail Start the clock and set it to be the topmost window.
Run your application and several others. Use ALT+TAB
to switch between applications, and be sure your
application repaints correctly.
Comments:
TrueType
___Pass ___Fail Examine your application code and be sure there are no
dependencies on the font names Helv and Tms Rmn.
___Pass ___Fail Enable the "Show Only TrueType Fonts in Applications"
option in Control Panel. Check the font dialogs in
your application. They should list all TrueType fonts
and no non-TrueType fonts.
___Pass ___Fail Check fonts in dialog boxes, tool bars, and sample
files for your application. Be sure they are readable.
___Pass ___Fail Check the application code and be sure there are no
dependencies on GetTextFace and EnumFonts matching.
___Pass ___Fail Create a document in your application that contains
characters close to the edge of the screen and the
printable margins. Scroll the document, checking for
characters (or pieces of characters) left behind.
___Pass ___Fail Highlight text. Be sure the highlight encompasses all
characters and that no part of any character
(especially the first and last characters) is left
out.
___Pass ___Fail Print the document. Be sure no characters are clipped
at the edges of the printable region.
___Pass ___Fail Create a document under Windows version 3.0a using
type-manager (such as ATM), bitmap, and device fonts.
Look at the document under Windows version 3.1; be
sure the screen appears the same.
___Pass ___Fail Print the document under Windows versions 3.0a and
3.1; be sure the output appears the same.
___Pass ___Fail If your application assumed that scalable fonts could
not print on nonscalable devices, such as a PCL
printer, it will have problems in enumerating fonts.
Check the font dialog box and sizes listed for TrueType
fonts. The font dialog box should list many sizes for each
TrueType font.
___Pass ___Fail TrueType fonts are shipped in regular, bold, italic,
and bold italic. This can cause problems for
applications that assumed styles were always
simulated. Check the font dialog box to ensure that each
font is listed only once.
___Pass ___Fail TrueType fonts appear for both printer and screen.
This causes problems for applications that assume
printer and screen fonts are always different. Select
a nonraster printer (for example, PCL) and check the
font dialog box to ensure that each font is listed only
once.
___Pass ___Fail Create a document with a nonscalable printer
installed, using two fonts, a device font, and a
TrueType font. Both fonts must have the same name.
Print the document.
___Pass ___Fail Use a TrueType font to create a document using the
desktop publishing and international characters. Be
sure the characters appear correctly on the screen.
___Pass ___Fail Change to a bitmap font, and then change back to a
TrueType font. Be sure the characters still appear
correctly.
___Pass ___Fail Print the document. Be sure the printout is correct.
___Pass ___Fail Using the Char Map application in the accessories
group of Program Manager, use a TrueType font to copy
the desktop publishing characters to the clipboard and
paste them into your application. Be sure the
characters appear correctly.
Comments:
Enhanced-Mode Windows
___Pass ___Fail Check COMM.DRV by sending and receiving data in your
application at various baud rates.
___Pass ___Fail Check the new VDMAD as a replacement for your custom
VDMAD by thoroughly testing your application with the
new VDMAD.
___Pass ___Fail Check your application's installation program to
ensure that it does not overwrite the "device=*VDMAD"
setting in the SYSTEM.INI file.
___Pass ___Fail Check the VTD by starting several other non-Windows
applications and then starting your non-Windows
application. Check for timer problems. If there are
problems, set the SYSTEM.INI setting TrapTimerPorts
and try the tests again.
___Pass ___Fail Check the VDD by starting your application or TSR in
one or more virtual machines and then switch between
virtual machines watching for problems with the
display.
___Pass ___Fail Check Fastdisk by running it while testing your
application.
Comments:
Printing
___Pass ___Fail Print using the PostScript driver.
___Pass ___Fail Print using the LaserJet II driver.
___Pass ___Fail Print using the LaserJet III driver.
___Pass ___Fail Print using the dot-matrix driver.
___Pass ___Fail Bring a document created under Windows version 3.0a
with your application to version 3.1 and print it. Be
sure there are no error messages and that it prints
correctly.
___Pass ___Fail Check you application code for the GETTEXTENTTABLE
escape.
<BR/><BR/>
Please include the documents you printed when returning this form to
Microsoft.
Comments:
SmartDrive 4
___Pass ___Fail Read files from disk.
___Pass ___Fail Write files to disk.
___Pass ___Fail If your application uses the floppy drive or can read
and write files to the floppy drive, try those
operations with caching enabled on the floppy.
Comments:
Local CTRL+ALT+DEL
___Pass ___Fail Press CTRL+ALT+DEL while your application is running.
Be sure Windows continues to function after your
application terminates.
Comments:
Checklist of Problem Areas Not Specific to Windows 3.1 Changes
Following are some areas that you should check, but that were not
changes for Windows version 3.1. We have seen several applications
with problems in these areas.
Setup
___Pass ___Fail Try your setup program with SHARE enabled and not
enabled. Be sure your setup program runs correctly in
both cases.
___Pass ___Fail Install Windows version 3.1 over Windows version 3.0,
but in a directory other than the one containing
Windows version 3.0. Be sure your application runs
under Windows version 3.1 without being reinstalled.
___Pass ___Fail Try your setup program with a path that is at the
maximum length. Be sure your setup program recognizes
that it cannot add to the path.
___Pass ___Fail Try your setup program with an AUTOEXEC.BAT file
containing more than one path statement, or by calling
batch files that set the path. Be sure your setup
program recognizes the correct path statement to which
to add information.
___Pass ___Fail Try your setup program with a screen saver running.
___Pass ___Fail Install your application on a hardcard drive and on a
compressed drive. Be sure the application installs and
runs correctly.
___Pass ___Fail Install your application on a hard drive with a drive
letter greater than E:. Be sure your application
installs and runs correctly.
___Pass ___Fail If your application can be installed on a network,
install it on as many networks as possible.
Comments:
General Operations
___Pass ___Fail Load a large file, and resize the application window
so that scrolling is necessary horizontally and
vertically. Scroll and ensure that repainting is
correct.
___Pass ___Fail Exit Windows while your application is still running
but has unsaved files. Be sure you are prompted to
save the unsaved files before Windows exits.
___Pass ___Fail Run your application with SHARE enabled and not
enabled. Be sure it runs correctly.
___Pass ___Fail If your application adds anything to AUTOEXEC.BAT that
uses environment space, be sure the application works
or dies gracefully if the machine is out of
environment space.
___Pass ___Fail Have the default printer in the Control Panel
different from the printer selected in your
application, and print a document. Be sure your
application prints correctly or that it warns the user
of the condition.
___Pass ___Fail Create a directory using character ASCII 129
(ALT+129). Using your application's File Open or File
Save commands, change to this directory.
Comments:
Please enter the names of three people who have performed the testing
and want to be eligible for the Windows 3.1 Compatibility Sweepstakes:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Name:
Address for possible delivery:
Phone:
Title:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Name:
Address for possible delivery:
Phone:
Title:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Name:
Address for possible delivery:
Phone:
Title:
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
RETURN YOUR COMPLETED TEST TO:
Windows Compatibility Test
Microsoft Corporation
One Microsoft Way
Building 4
Redmond, WA 98052-6399
Additional query words:
3.10
Keywords : kb16bitonly
Version : WINDOWS:3.1
Platform : WINDOWS
Issue type :