Hooking Interrupt 21h Before Windows

ID: Q81813

The information in this article applies to:

Microsoft Windows Software Development Kit (SDK) 3.1

SUMMARY

In the standard and enhanced modes of Microsoft Windows version 3.1, an application for Windows can receive notification of all calls to MS-DOS made by Windows after these calls have been translated by the Windows kernel. To do so, the application calls the MS-DOS Protected Mode Interface (DPMI) to hook the real mode Interrupt 21h vector.

MORE INFORMATION

This technique is not effective in standard mode under Windows version 3.1 because the Windows 3.1 Standard Mode MS-DOS Extender (DOSX) does not use the real mode interrupt vector table (IVT) to translate software interrupts from protected mode to real mode. DOSX uses a copy of the real mode IVT, made at DOSX initialization, for this purpose.

In addition, receiving notification using DPMI is of questionable validity because future versions of Windows may implement some or all software interrupts in protected mode. (The Windows 3.1 kernel already implements Interrupt 13h in protected mode, when 32-bit disk access is enabled.)

Applications that must receive notification of Interrupt 21h after the Windows kernel can use the GetSetKernelDOSProc() function provided by the standard and enhanced modes of Windows 3.1. This function sets the protected mode address that the kernel calls to implement Interrupt 21h. The prototype of GetSetKernelDOSProc() is as follows:


   DWORD _far _pascal GetSetKernelDOSProc(DWORD newproc);

The newproc parameter is the protected mode address of the new Interrupt 21h interrupt routine, which kernel calls to implement Interrupt 21h. GetSetKernelDOSProc() returns the address of the old routine, which kernel called previously. If the application processes only particular Interrupt 21h functions, it must send unprocessed functions to the next handler in the chain. Use the address returned by GetSetKernelDOSProc() to call the next handler in the chain.

An application calls GetSetKernelDOSProc() once to install itself as the Interrupt 21h handler, saving the return value. When the function exits, it calls the function again to restore the previous value. An application that can uninstall itself should verify that GetSetKernelDOSProc() returns the value of its handler when called to restore the previous handler. If GetSetKernelDOSProc() returns a different value, another program has installed itself into the Interrupt 21h chain. If so, the application should call GetSetKernelDOSProc() a third time to place itself back into the Interrupt 21h chain.

An application that hooks real mode Interrupt 21h in Windows 3.0 should use GetSetKernelDOSProc() in Windows 3.1 and later versions. Although GetSetKernelDOSProc() is not in LIBW.LIB, it is exported as ordinal 311, which is the preferred method to link to the function. The other method is to use GetProcAddress() with the function name.

Additional query words: 3.10 no32bit

Keywords : kb16bitonly
Version : WINDOWS:3.1
Platform : WINDOWS
Issue type :