HOWTO: Remove Win32s

ID: Q120486

The information in this article applies to:

SUMMARY

To remove Win32s:

Remove the following line from the [386Enh] section in the System.ini file:
```
device=<WINDOWS>\<SYSTEM>\win32s\w32s.386 
```
where <WINDOWS> and <SYSTEM> are where the Windows and System directories are, respectively.

Modify the following line from the [BOOT] section in the System.ini file
```
drivers=mmsystem.dll winmm16.dll 
```
to the following (remove Winmm16.dll):


drivers=mmsystem.dll

Delete the following files from the <WINDOWS>\<SYSTEM> subdirectory or from the SYSTEM directory in network installations:


      WINMM16.DLL
      W32SYS.DLL
      WIN32S16.DLL
      WIN32S.INI
      WINHLP32.EXE
      WINDOWS.HLP
      WINHLP32.HLP
      WINHLP32.CNT

Delete all the files in the <WINDOWS>\<SYSTEM>\WIN32S subdirectory or the <SYSTEM>\WIN32S subdirectory in network installations. Then delete subdirectory itself.

Restart Windows.

NOTE: It may not be possible to delete W32SYS.DLL while Windows is running. This occurs if you ran some Win32 application. It is recommended that you remove Win32s while in MS-DOS, not from an MS-DOS box.

NOTE: <WINDOWS> refers to the windows installation directory. On a networked Windows installation, the system directory may be located on a remote share. If you are only removing Win32s from your machine, then you do not need to remove the shared files (in <SYSTEM> and <SYSTEM>\WIN32S). Before removing these files from the network share, make sure that all users that use Win32s have removed the references to Win32s from the SYSTEM.INI file.

This information can be found in the Win32s Programmer's Reference help file.

Additional query words: 1.00 1.10 1.15 1.20 1.30c

Keywords : kbsetup kbWin32s kbhowto kbwin32sfaq
Version : WINDOWS:1,1.1,1.15,1.2,1.3c
Platform : WINDOWS
Issue type : kbhowto