INF: Configuring COMTI to Use TCP/IP Link to CICS Using the Cedar Bank Demo
ID: Q231862
|
The information in this article applies to:
-
Microsoft COM Transaction Integrator for CICS and IMS, version 4.0 SP2
-
Microsoft SNA Server, version 4.0SP2
SUMMARY
This article describes how to configure a TCP/IP link to CICS, using the Cedar Bank sample provided with COM Transaction Integrator for CICS and IMS (COMTI). You need Windows NT 4.0 Service Pack 3 or greater, SNA Server 4.0 Service Pack 2, and the host requires TCP/IP V3R2 and CICS 3.1 or greater.
MORE INFORMATION- Verify that the CICS region supports TCP/IP, and that the IBM-supplied listener (program EZACIC02, tranID CSKL) is defined. You will need to determine the IP address on the mainframe and the TCP/IP port number of the listener. You can verify the TCP port number by using the following CICS command: EZAC DISPLAY LISTENER. Both IP address and TCP port number must be entered in the COMTI CICS TCP/IP Remote Environment (RE). The following information describes the process of configuring the host for TCP/IP to CICS and CICS to TCP/IP
- TCP/IP to CICS Configuration
A TCP/IP port number is associated with a CICS region in the TCP/IP profile data set (hlq.PROFILE.TCPIP). The port statement is used to define this relationship. An example of a port statement that associates port 3000 with CICS region CICSRG is:
3000 TCP CICSRG
- CICS to TCP/IP Configuration
- Defining CICS to TCP Using the EZAC Transaction
The following is a sample host definition:
EZAC,DEFINE
ENTER ONE OF THE FOLLOWING
CICS ===> yes Enter Yes|No
LISTENER ===> Enter Yes|No
EZAC,DEFINE,CICS
ENTER ALL FIELDS
APPLID ===> CICSRG APPLID of CICS System
EZAC,DEFINE,CICS
OVERTYPE TO ENTER
APPLID ===> CICSRG APPLID of CICS System
TCPADDR ===> TCPIP Name of TCP Address Space
NTASKS ===> 020 Number of Reusable Tasks
DPRTY ===> 000 DPRTY value for ATTACH
CACHMIN ===> 015 Minimum Refresh Time for Cache
CACHMAX ===> 030 Maximum Refresh Time for Cache
CACHRES ===> 010 Maximum number of Resolvers
ERRORTD ===> CSMT TD Queue for Error Messages
- Defining CICS Listener Parameters Using the EZAC Transaction
The following is a sample host definition:
EZAC,DEFINE
ENTER ONE OF THE FOLLOWING
CICS ===> Enter Yes|No
LISTENER ===> yes Enter Yes|No
EZAC,DEFINE,LISTENER
ENTER ALL FIELDS
APPLID ===> CICSRG APPLID of CICS System
NAME ===> CSKL TRANSACTION NAME OF LISTENER
EZAC,defiNE,LISTENER
OVERTYPE TO ENTER
APPLID ===> CICSRG APPLID of CICS System
TRANID ===> CSKL Transaction Name of Listener
PORT ===> 03000 Port Number of Listener
IMMEDIATE ===> YES Immediate Startup Yes|No
BACKLOG ===> 010 Backlog Value for Listener
NUMSOCK ===> 050 Number of Sockets in Listener
MINMSGL ===> 004 Minimum Message Length
ACCTIME ===> 060 Timeout Value for ACCEPT
GIVTIME ===> 030 Timeout Value for GIVESOCKET
REATIME ===> 000 Timeout Value for READ
FASTRD ===> YES Read Immediately Yes|No
TRANTRN ===> YES Translate TRNID Yes|No
TRANUSR ===> YES Translate User Data Yes|No
SECEXIT ===> Name of Security Exit
- For further information, refer to IBM document #SC31-7131, "TCP/IP V3R2 for MVS: CICS TCP/IP Socket Interface Guide."
- Start the IBM-supplied listener using the following command: EZAO START. You can view the status of the listener by using the following CICS command: CEMT INQUIRE TASK, look for CSKL.
- Compile the MS-provided sample server for the IBM-provided listener. IBM does not provide a child server for its listener, but IBM does provide samples, documented in Appendix F of the TCP/IP Socket Guide. Microsoft also provides a sample (MSCMTICS), which invokes link model transactions.
DISCLAIMER: The COMTI sample program is not intended for use in production environments. It is provided to you to demonstrate the techniques you can use to develop your own server for production use.
Sources for the Microsoft sample are found in the snaroot\COMTI\SampleCode\ProgrammingSpecifics\TCP\Mscmtics.cbl file. This file implements the "child server" function described in the "Client-listener, child server" application set documented as item 1 of chapter 6.2 of the Socket Interface Guide. The other sample source files in this folder are for the other sub-modes of TCP connectivity for CICS and IMS. MSCMTICS should be compiled and linked as a standard CICS transaction, and should be installed by means of CEDA DEF TRANSACTION. You can use the default name "MSCM" for this transaction or you can create another transaction ID.
The remaining steps are performed on the computer running Windows NT Server. Using the COMTI administrative snap-in for MMC, you will create a TCP/IP Remote Environment. Then, using Component Builder, you will create and deploy a Cedar Bank component based on the TCP MS Link model rather than the APPC-based CICS Link component included with SNA Server. The new component will have exactly the same COM interface as the original APPC-based component, but uses TCP and the MS Link model to communicate with the host programs.
- Create a New TCP/IP Remote Environment in COMTI Manager.
- In the COMTI MMC Console, open the COM Transaction Integrator snap-in, select the Remote Environments folder, right-click, and choose N)ew R)emote Environment.
- In the Add Remote Environment dialog box, select CICS and IMS using TCP/IP, and click OK.
- In the Remote Environment Wizard, enter the IP address of the host noted in step 1 above, enter the TCP port number, also noted in step 1, and click OK.
- Because the TCP Cedar Bank component has the same interface and class ID as the APPC model, before you deploy the TCP component, you must unregister any existing APPC Cedar Bank component you might have defined in Microsoft Transaction Services. Use the following steps to remove the APPC Cedar Bank component:
- In the COMTI MMC console (or any other MMC console with the Microsoft Transaction Services snap-in installed), open the Microsoft Transaction Server snap-in, then open the Installed Packages folder, browse to the package in which you deployed Cedar Bank, and delete that component from the package.
- To ensure the package process notices the configuration change, select the package, right-click, and select Stop Process.
- Create the TCP CedarBank Component.
- Open Component Builder, and select F)ile N)ew.
- In the New Component Library dialog box, type a library name of Cedar and an interface name of Bank. Also, under Remote Environment Type, select CICS and IMS via TCP/IP, under Target Environment, select CICS, and under Server Type, select MS Link. Click OK.
- Select F)ile I)mport Component L)ibrary. In the Insert Component Library dialog box, browse to snaroot\COMTI\Tutorials\CedarBank\CICSLink,
select Cedar.tlb, and click OK. The Cedar Bank component will now appear in the Component Builder screen.
- Specify the name of the CICS server transaction as the TP Name property for the GETACCTS and CEDRBANK methods. In the left-hand pane, select the root component (interface "Bank") and right-click, then select Unlock from the pop-up menu. Select each method, right-click and select Pr)operties. In the Properties dialog box, select the Host Names tab. In the TP Name field, enter MSCM (or whatever CICS transaction ID you used when defining the MSCMTICS program in step 3). Click OK.
- In Component Builder, on the File menu, click Save to save this type library to disk with file name CedarBankTcp.tlb (or any name other than CedarBank).
- Deploy the TCP Cedar Bank component in MTS and assign it to the TCP Remote Environment created in step 4. You can use the deployment wizard in Component Builder:
- At the Component Builder main menu, select T)ools A)dd to Package.
- In the Add to Transaction Server Package dialog box, select the MTS package you want from the left-hand panel, and select the TCP Remote Environment you configured in step 4 in the right-hand panel. Click OK.
- The Cedar Bank Sample Application is ready to be invoked. Open the Cedar Bank Sample, and invoke each of the methods.
Additional query words:
Keywords : sna4sp2
Version : WINDOWS:4.0 SP2,4.0SP2
Platform : WINDOWS
Issue type : kbhowto
|