Configuring PCMCIA Net/Modem Combo Cards

·Configuring PCMCIA Combo Net/Modem Cards

Registry values must be set correctly for combo net/modem cards to function properly.

In \Machine\System\CurrentControlSet\Services\DriverName#
\Parameters you must add ModemFunction:REG_DWORD:1 to identify the combo card. (DriverName is the name of the combo card driver and # is the instance number.) The first I/O port location, IoBaseAddress, must identify the modem location. There must be only one InterruptNumber value entry, identifying the IRQL to be shared by the components of the combo card.

See the Programmer's Guide for information on installing drivers.