In This Chapter
Understanding the Office Setup Program
Modifying Client Setup with the Network Installation Wizard
Running Client Setup with the Modified STF File

See Also

• For information about installing Office applications, see Chapter 4, "Installing Microsoft Office."

• For information about installing and configuring Windows NT Workstation and Office 97 on client computers using the Zero Administration Kit (ZAK), see "Installing Office 97 with the Zero Administration Kit" in Chapter 4, "Installing Microsoft Office."

• For information about deploying and customizing Office 98 for the Macintosh, see "Rolling Out Office 98 for the Macintosh" in Chapter 4, "Installing Microsoft Office."

• For information about system requirements for Office, see Chapter 5, "System Requirements for Microsoft Office."

The flexibility available in the standard Setup process is sufficient for many situations. But there are cases in which it is beneficial to customize the client installation process using the tools and strategies described in this chapter. For example, if you want to install a uniform configuration of Microsoft Office 97 for Windows on all your client computers, including a particular selection of converters and templates, you can create a customized Setup script using the Network Installation Wizard.

The Office Setup program receives all of its instructions from a set of tables that describe which files are to be installed and how each installation is to occur. Setup uses the following three primary files:

• The tables in the Off97Std.stf or Off97Pro.stf (STF) file specify where and in what order files are copied and what registry entries are created.

• The tables in the Off97Std.inf or Off97Pro.inf (INF) file contain detailed descriptions of all Offices files and are used by the STF file to determine which files to copy during installation.

• The instructions in the Setup.1st (LST) file provide Setup with the names of the STF and INF files and installation parameters.

These files are designed for the standard Office client installation process. By making modifications, however, you can create a customized client installation process.

Caution   Do not modify any of these files with a standard text editor. The STF and INF files are tab-delimited files that rely heavily on positional parameters, and they can easily be damaged by modifying them with anything other than the tools described here. In particular, the LST file provides information to Setup that, if modified incorrectly, causes the installation to fail.

For more information about the contents of the Setup files, see Appendix B, "Setup Command-Line Options and File Formats."

Customizing a Network Installation

The LST, STF, and INF files reside in the same folder as Setup.exe. The most common method for creating customized client installations is to create an administrative installation point and modify these Setup files directly on the server. That way, all users who install Office over the network run the custom client installation that you design.

Note   The majority of this chapter assumes a network installation. If you are installing Office directly from the Office CD or floppy disks, you cannot customize the Setup process using the tools described in this chapter. For more information about network installations, see Chapter 4, "Installing Microsoft Office."

There are two ways you can modify the Setup files to customize the client installation. You can change values in the STF file to select the following:

• Type of installation to use during batch mode (Typical, Custom, or Run from Network Server).

• Specific components, such as Microsoft Word or the spelling checker, to install during batch mode.

• Destination folders to use for Office and its components.

• Responses to Yes/No questions, such as "Would you like to remove your previous version of Office?"

• Items to appear on the Windows Start menu or Windows NT Workstation version 3.51 program group.

• Default working folder for Start menu and Windows NT Workstations 3.51 program group items.

You can also add new entries to the STF or INF file so that Setup performs the following additional tasks during client installation:

• Create additional registry settings.

• Install files other than Office files.

The Network Installation Wizard modifies the LST, STF, and INF files for the client Setup used in Office 97. Using this tool, you can change the values for items in the STF file. If the user installs Office in batch mode, Setup uses the default values you specify in the modified STF file. If the user installs Office in interactive mode, the values you set with the Network Installation Wizard appear as default responses during client Setup.

Note   The Network Installation Wizard runs on the Windows 95 or Windows NT operating system only.

To understand how the Network Installation Wizard modifies Office Setup, first become familiar with the basic client installation process for Office. If you have not already done so, read Chapter 4, "Installing Microsoft Office."

The Network Installation Wizard guides you through the process of creating a customized Setup in the following steps:

1. Start the Network Installation Wizard.

2. Specify the appropriate LST file.

3. Select a destination folder for the Office application files.

4. Select a default folder for Office documents.

5. Select a location for shared Office applications.

6. Specify an installation log (optional).

7. Choose the type of installation.

8. Configure the installation environment.

9. Select items for the Desktop, Start menu, or Program Manager.

10. Specify the destination folder for the LST, STF, and INF files, and any additional files you add to the installation.

11. Add additional files to the Office installation (optional).

12. Add Windows registry entries (optional).

13. Select type of quiet mode for client Setup (optional).

14. Save changes to the LST, STF, and INF files.

The following sections describe each of these steps in more detail.

Start the Network Installation Wizard

Like other Office wizards, the Network Installation Wizard guides you through a series of panels and options. You proceed to the next panel by clicking Next, and you can go back to the previous panel by clicking Back. The Setup files are not modified until you click Finish, so you can go back and change any answers before you complete the final panel.

You can quit the Network Installation Wizard at any time by clicking Cancel.

Specify the LST or STF File

After the initial Welcome panel, the Network Installation Wizard asks for the name of the LST file to customize. Enter the name of the LST file from the folder containing the main Office application files. For example, in Office 97 Professional Edition, the LST file name is Setup.lst.

Note    Office 95 does not use an LST file. If you are customizing an Office 95 installation, you must specify the STF file instead. In the Open LST or STF File panel, click Browse. In the Files of type box, select Setup Table File (*.stf) and then select the correct STF file.

The Network Installation Wizard finds the name of the STF file, which is defined in the LST file, and then opens the STF file. The Network Installation Wizard looks for the STF and INF files in the same folder in which the LST file resides. While the Network Installation Wizard is reading the STF file, which can take a minute or two, it displays a progress bar.

After opening the STF file, the Network Installation Wizard opens the INF file specified in the STF file. The INF file resides in the same folder as the STF file and has the same file name with an INF extension. In Office 97 Professional Edition, the name of the INF file is Off97Pro.inf. If the Network Installation Wizard cannot find the INF file specified in the STF file, you are prompted to enter the location and name of the file.

Select a Primary Location for the Office Application Files

The Network Installation Wizard then displays the name of the folder where the main Office application files are installed during client Setup. You can change the default folder by entering a new name, or by clicking Browse and selecting a new folder.

If you run client Setup in batch mode (using the /q command­line option), Setup installs the Office application files in this folder. If a user runs client Setup interactively, this folder appears as the default folder, which the user can change.

Note   Remember that the folder name you enter here is used by Setup when users install Office. If you specify a folder on a network server, that folder must be accessible during client Setup. If you specify a local folder, Setup creates a folder with that name on the user's hard disk.

Select a Default Folder for Office Documents

Both Windows 95 and Windows NT Workstation version 4.0 provide a default folder to store all user documents, including Office documents. By default, this folder is named My Documents and is located at the root directory of the C drive. If the default folder has not yet been defined on the user's hard disk, the Network Installation Wizard allows you to specify a name and path for this folder, which is created during client Setup. If the folder has already been defined in the user's hard disk, then setting this option has no effect.

User\Office\Common\Personal Folder

For more information, see "Using Windows System Policies to Customize Office" in Chapter 7, "Customizing and Optimizing Microsoft Office."

Select a Location for Shared Office Applications

Next, the Network Installation Wizard displays a panel similar to the dialog box that was displayed when you created the administrative installation point. The options in this panel determine whether users choose where to install shared applications, or whether you make that choice for them. The panel contains these options:

• Server

  Shared applications are stored on the server, and users run them over the network. Users running client Setup do not make the choice.

• Local hard drive

  Shared applications are installed on each user's computer. Users running client Setup do not make the choice.

• User's choice

  Users choose where to install shared applications when they run client Setup.

If users install Office in batch mode with no user interaction, you must select either Server or Local hard drive. If you select Server, a second panel is displayed for you to specify a location on the network for the shared applications. (This panel is also displayed if you select User's choice, since users in that scenario may choose to store shared applications on the network.)

Under Connect to server using, you can specify whether you want the location of the shared applications to be defined with a drive letter or with a UNC path. If you select the Drive letters option here, you must enter a drive letter and a path under Network location. You do not need to have a valid connection to the drive while running the Network Installation Wizard. However, users must have a valid connection to the drive during client Setup. If you select the UNC option, you must enter a server name and path under Network location.

Note   UNC stands for Universal Naming Convention and refers to the \\servername\sharename syntax used for defining servers and shared areas on the server for LAN Manager­compatible networks.

When you click Next, the Network Installation Wizard attempts to connect to the server to verify it. If it encounters any errors, the Network Installation Wizard asks whether you want to use the path as specified. To continue and leave the path as it is, click Yes; to change the path, click No.

The following table shows some reasons why the verification might fail and what you can do to fix the problem.

If the error is caused by this	Do this
Misspelled server or share name.	Click No and correct the name.
Share not yet created.	Click Yes and create the share before users begin installing Office.
Cannot connect to a share on the server. (Many networks do not allow you to do this if you run directly from the server.)	Click Yes; you can verify the share later from another computer on the network.
Invalid UNC path	Click Yes; verify that the share is accessible before users try to install from this server

Specify an Installation Log

Office Setup can create a log file containing information about the installation. If you specify a log file in the Installation Log panel in the Network Installation Wizard, then each time Office is installed from this administrative installation point, Setup writes one record into the log file. The log file is a text file, and each record contains the following fields:

• Date

• Time

• User name

• Machine name

• Application name — MS Office 97 Standard or MS Office 97 Professional

• Version — a number similar to 97.0.0.1114(1033)

• Operation — for example, Install or RemoveAll

The Network Installation Wizard gives you the opportunity to create a log file by specifying the log file name. If you do not want a log file, click Next without entering a file name.

Note   The installation log file is a new feature of Setup for Office 97. If you are using the Network Installation Wizard with an Office 95 STF file, the Installation Log panel does not appear.

Choose the Type of Installation

Office 97 Setup offers three types of installation: Typical, Custom, and Run from Network Server. If you select Typical or Custom in the Installation Type panel, the Network Installation Wizard displays the Components panel so you can select which components you want Setup to install. If you run Setup in batch mode (/q command­line option) using the Typical or Custom installation type (/b command­line option), Setup installs the components you selected.

For example, if you select Custom in the Installation Type panel and then select a number of text converters in the Components panel, you can use the command setup.exe /q /b2 to install those converters with Office. For more information about Setup command­line options, see Appendix B, "Setup Command-Line Options and File Formats."

Note   After you finish customizing the Setup files, the Network Installation Wizard displays a suggested Setup command string in the final panel. This string includes the correct installation type parameter. For example, if you select Typical in the Installation Type panel, the Network Installation Wizard displays in the final panel a suggested command string that includes the parameter /b1.

If you run Setup interactively, then the components you select with the Network Installation Wizard are displayed as default selections.

Note   A fourth installation type, Run from CD, is available when you install Office directly from the Office CD. Because you are modifying the STF file for a network installation, that option is not discussed here.

If you select Typical in the Installation Type panel, the Network Installation Wizard displays the list of Typical installation options in the Components panel in a format similar to the one presented to an end user running client Setup in interactive mode.

If you select Custom in the Installation Type panel, the Network Installation Wizard displays the list of Custom options in the Components panel.

When you select an installation option in the All Components box, a description appears under Description for selected component, and the folder name appears in the Folder for selected component box. Each of these installation options may have additional options — if so, a plus sign (+) appears to the left of the option in the All Components box. Clicking the plus sign (+) expands the list, displaying its additional components.

You can select all or only some of a set of additional components:

• If a check box is selected, all of that option's additional components are selected.

• If a check box is cleared, none of that option's additional components are selected.

• If a check box is grayed, some of that option's additional components are selected. Click the plus sign (+) to see what those components are.

The Select All button allows you to select all the Office options, along with all their additional components.

If you use the modified STF file in batch mode, the state of a check box for a particular option indicates whether the option is installed when client Setup is run: selected options are installed; cleared options are not.

If you use the modified STF file in interactive mode, the state of the check boxes in the All Components box represents the default settings that are presented to the user during client Setup. For example, if you select the Office Tools check box, that check box is selected when the user runs client Setup interactively and views the options for a Custom installation.

With the Browse button you can modify the default folder for a selected option. Both the long and short names of the folder you select are kept in the STF file. However, the Return long folder name to previous dialog check box in the Browse Folders dialog box determines which form of the name is displayed in the Components panel. This option does not affect the STF file, but only the way you view the folder name in the Network Installation Wizard. (The default is to use long folder names.)

When you are creating a customized network installation, you can use a set of special folder identifiers to specify standard system folders in the Browse Folders dialog box. That way, you do not need to know the exact location of these folders on each user's computer.

This folder identifier	Represents this folder
<ParentDestFolder>	The destination folder of the Office component.
<SetupSourceFolder>	The folder from which Setup is run.
<WindowsFolder>	The main Windows folder.
<SystemFolder>	The Windows system folder.
<SharedFilesFolder>	The folder in which shared applications are stored.
<ProgramFilesFolder>	The Program Files folder in Windows 95, or the Windows directory on Windows NT Workstation.

The Network Installation Wizard may also display the identifier <NoneSpecified> for a particular folder. This means that the folder name has not yet been determined, but will be resolved by Setup during installation.

Note   You can specify a subfolder for any of these folders by appending a backslash ( \ ) and a subfolder name to the folder identifier — for example, <WindowsFolder>\Media.

Configure the Installation Environment

The STF file contains a number of questions that Setup uses to further configure the network installation. The questions Setup displays to the user depend on previous user responses and on the installation environment.

For example, suppose a user is installing Microsoft Outlook. If Setup finds Microsoft Schedule+ 95 on the hard disk, Setup asks whether to configure Outlook to use Schedule+ as the primary calendar. If Schedule+ 95 is not found, Setup does not display that question. If the same question can be asked in several situations during installation, then the STF file defines that question in multiple locations.

The Network Installation Wizard displays every Yes/No question that may appear during client Setup in the STF file and allows you to determine the default answers. Because a particular question may appear more than once in the STF file, the Network Installation Wizard may repeat the same question several times in the Yes/No Questions panel. To ensure that your default answer is used during client Setup, change every occurrence of the question in this panel.

Clicking a question in the Yes/No Questions panel switches the answer from Yes to No and back again.

Why Are There Duplicate Items in the List? In some of the lists displayed in the Network Installation Wizard, you may see what appear to be duplicate entries. This occurs because there are several execution paths that Setup can take through the STF file, depending on the configuration of the user's computer and whether Setup finds a previous version of Office installed. The same question may appear in more than one path; however, Setup asks each question only once during installation. Because the Network Installation Wizard does not know what path Setup will take, it displays every instance of a question. If you want to specify a default answer, you must do so for all the duplicate questions in the list, so that Setup uses the same answer in every context. In these lists, the Network Installation Wizard displays an Object ID column with the heading ObjID. The Object ID is a number in the STF file that uniquely identifies each item in the list. This number helps the Network Installation Wizard distinguish between duplicate items in the STF. You do not need to use this number when running the Network Installation Wizard. For more information about the structure of the STF file, see Appendix B, "Setup Command-Line Options and File Formats."

Select Items for Program Manager

The Network Installation Wizard allows you to specify which application icons you want to install in the Program Manager group when you install Office on a computer running Windows NT Workstation 3.51. In the Program Manager Items panel, you can specify the Program Manager group and the default working folder for each item you select. The corresponding Program Manager icons are created when you install Office on a computer running Windows NT Workstation 3.51.

When you click an item in the Program Manager Item box, the corresponding Program Manager group appears to the right. You can change the group name, and you can select the Prevent users from changing groups during installation check box if you do not want users to modify the location of the selected item.

The working folder for the application appears below the Program Manager Items box. This is the default folder used for creating new files or browsing for existing files. Some applications explicitly define the folder to be used for certain types of files (for example, Word defines a specific folder to be used for template files), in which case the working folder is used only for those files that have no other folder explicitly defined for them. You can change this folder by clicking Browse.

Clicking Select None clears the check boxes for all items in the list.

Which Icons Are Actually Installed? The items listed in the Program Manager Items panel include all the program icons defined in the Office STF file; however, not all of these icons are necessarily installed during client Setup. The icons that are actually installed depend on the options the user selects during Setup, along with other factors that Setup encounters, such as whether a previous version of Office is installed. Clearing a check box in this list, however, guarantees that the corresponding icon is not installed. If there are duplicates of an item in the list, only one corresponding program icon is actually created in Program Manager during installation. However, you must modify each duplicate item the same way, so that the correct icon is created regardless of the path Setup takes. For an explanation of duplicate items displayed in the Program Manager Items or Shortcuts panels, see the sidebar "Why Are There Duplicate Items in the List?" earlier in this chapter.

Select Shortcuts for the Start Menu or Desktop

The Start Menu and Desktop Items panel in the Network Installation Wizard allows you to select the shortcuts that appear in the Windows\Start Menu folder or on the Desktop when you install Office on a computer running Windows 95 or Windows NT Workstation 4.0.

Note   The shortcuts in the list include all the program files defined in the Office STF file; however, not all of these items are necessarily installed during client Setup. For more information about which items are installed and about how Setup handles duplicate items, see the sidebar "Why Are There Duplicate Items in the List?" earlier in this chapter.

To change the properties of a shortcut, select it in the list and then click Edit. In the Edit Shortcut dialog box, you can change the folder in which the shortcut is installed, as well as the name and working folder of the shortcut.

You can use a set of standard folder identifiers to specify Start Menu folders in the Edit Shortcut dialog box.

This folder identifier	Represents this folder
<StartMenuFolder>	Start Menu folder
<ProgramsFolder>	Programs folder in the Start Menu folder
<StartupFolder>	Startup folder in the Start Menu folder
<DesktopFolder>	Desktop folder

You can also append a subfolder to a standard folder identifier in the Folder box. For example, <ProgramsFolder>\Microsoft Office or <DesktopFolder>\ValuPack.

In the Working directory box, you can enter a full path or a special folder identifier, like the ones used in the Browse Folders dialog box of the Components panel. For a list of folder identifiers that you use to specify standard system folders, see the table in "Choose the Type of Installation" earlier in this chapter.

Choose Folder for Modified Setup Files

In the Choose Setup Files Subfolder panel, specify the subfolder in which you want the Network Installation Wizard to create the customized LST, STF, and INF files. The subfolder name you specify is created in the folder in which the original STF folder resides.

Note   The folder name you enter in the Subfolder box must conform to the standard MS­DOS eight­character filename format.

Add Additional Files to the Office Installation

The Network Installation Wizard allows you to add files to the Office installation process. These are additional files, provided by you, that Setup installs along with the Office files. For example, you could add a Word template file you have created for your workgroup to use.

To add files to the installation process

1. In the Add Files panel, click Add.

2. In the Add box, select the file you want, and then click Open.

   This can be any type of file located anywhere on the network.

3. When the Network Installation Wizard asks if you want to copy the selected file to the Custom folder, click Yes.

   In order for added files to be accessible during client Setup, they must reside in the Custom folder. If you click No, you must remember to copy the file to the Custom folder yourself.

4. In the Destination folder for selected file box, enter a folder name, or click Browse to find the folder.

   Setup installs the file in this folder during client Setup. You must specify a folder; entering a description in the Description for selected file box is optional.

Add Registry Entries

The Network Installation Wizard allows you to add registry entries to the user's Windows registry during the installation process. This can be useful if, for example, you have written an application that relies on the contents of a particular registry entry. You can add the entry to Office Setup so that your application is ready after the user installs Office.

To add a new registry entry

1. In the Add Registry Entries panel, click Add.

   The Add dialog box appears.

2. In the Root box, enter the name of the top­level key for the new registry entry.

   Top­level keys include the following: HKEY_CLASSES_ROOT; HKEY_CURRENT_USER; HKEY_LOCAL_MACHINE; and HKEY_USERS.

3. In the Data type box, click the type of data stored in the new entry — either DWORD (double­word integer), or SZ (string).

4. In the Key box, enter the name of the subkey in which the new entry is stored.

5. In the Value name box, enter a name for the new registry entry.

6. In the Value data box, enter the data to be stored in the new entry.

   The data must match the data type already specified.

7. In the Description box, type a description of the new registry entry.

   This description is stored with the key in the registry and is optional.

   
   

For example, you can enter the new registry key HKEY_LOCAL_MACHINE\SOFTWARE\AcmeApps\ClipArt\Installed with a value of Yes using the following entries in the Add dialog box.

In this box	Select or type this text
Root	HKEY_LOCAL_MACHINE
Data type	SZ
Key	SOFTWARE\AcmeApps\ClipArt
Value name	Installed
Value data	Yes
Description	Acme clip art is installed

Select Quiet Mode

When you run client Setup to install Office on a client computer, you can specify a command­line option that runs Setup in batch mode, without requiring input from the user during the installation. Setup can run in several of these quiet modes; the one you choose determines whether Setup displays anything to the user or runs completely silently.

The Select Quiet Mode panel allows you to choose how you want Setup to run. When the Network Installation Wizard is finished, it displays a suggested Setup command string that includes the appropriate command­line option corresponding to the quiet mode you select in this panel.

For example, if you select 4: No Exit or Progress dialogs; force system restart if necessary, then the Network Installation Wizard suggests that you use the /QT Setup command­line options. For a description of all Setup command­line options, see Appendix B, "Setup Command­Line Options and File Formats."

Save Changes

To complete the customization process, the Network Installation Wizard saves the modified LST, STF, and INF files. These files are created in the subfolder you specified in the Choose Setup Files Subfolder panel.

In the Save Changes panel, you can specify the names of the customized STF, INF, and LST files.

Note   The name of the INF file you specify here is stored in the STF file, and the name of the STF file is stored in the LST file. If you rename either the STF or INF file on the disk, Setup cannot find it during installation.

For more information about how to use the modified STF file with Setup, see "Running Client Setup with the Modified STF File" later in this chapter.

Finish the Network Installation Wizard

When the Network Installation Wizard finishes writing the new LST, STF, and INF files, it displays
the Done! panel.

Based on the name of the LST file you entered in the Save Changes panel and the installation type and quiet mode you selected, the Network Installation Wizard suggests a Setup command string to use when running Setup. The following command­line options may be included in the string:

• The /L file command­line option specifies the name of the customized LST file.

• The /Bn command­line option specifies the installation type to use when running in batch mode.

• The /Qn command­line option specifies the quiet mode you selected, if any.

For a description of all Setup command­line options, see Appendix B, "Setup Command­Line Options and File Formats."

When you have successfully modified the LST, STF, and INF files with the Network Installation Wizard, you need to make them available so that users running client Setup use your modified files and not the original ones.

Note   Because the LST, STF, and INF files are interrelated, you cannot rename them directly on disk after you have created them with the Network Installation Wizard. To change the name of any of these files, run the Network Installation Wizard again and specify a different name.

Using the Modified STF File

The Network Installation Wizard creates the modified LST, STF, and INF files in a subfolder of the folder containing the Office Setup program. To use the modified files, the user runs Setup from the Setup folder with the command string suggested by the Network Installation Wizard.

For example, suppose your administrative installation point is in folder MSOffice on the network share \\Server1\Install. In the Choose Setup Files Subfolder panel of the Network Installation Wizard, you enter Custom as the name of the subfolder that contains the modified Setup files (for example, NewSetup.stf, NewSetup.inf, and NewSetup.lst). To install Office using your customized Setup files, users connect to \\Server1\Install\MSOffice and run Setup with the following command string (along with any other command­line options you require):

setup /l Custom\NewSetup.lst

Setup opens your modified LST file in the Custom subfolder and installs Office using the custom files you created with the Network Installation Wizard.

You can create more than one customized Office installation by running the Network Installation Wizard for each variation. Save each set of modified LST, STF, and INF files in a separate subfolder. Users specify the appropriate subfolder in the Setup command string when they run Setup.

For example, suppose you have three departments with unique installation requirements: Engineering, Accounting, and Services. You can run the Network Installation Wizard three times, creating a customized Office installation for each department, and save the custom files in separate subfolders: Engineer, Account, Services. Users from each department run Setup by connecting to the administrative installation point and using one of the following command strings:

setup /l Engineer\NewSetup.lst
setup /l Account\NewSetup.lst
setup /l Services\NewSetup.lst

For more information about command­line options for Setup.exe, see Appendix B, "Setup Command­Line Options and File Formats."

Installing Office over the Network

Once you have modified the LST, STF, and INF files, there are three ways to initiate a client installation of Office: interactive, batch, and push.

Interactive Installation

In an interactive installation, users connect to the Office server and run Setup using the command­line options you have chosen. Setup prompts the user for installation information. Modifications you have made to the STF file are displayed as default responses to user prompts.

Batch Installation

In a batch installation, you create a batch file which runs Setup using your customized STF file with the appropriate command­line options. The user runs the batch file, which in turn installs Office with no additional user interaction. Setup does not prompt the user for information, but uses the responses from the customized STF file instead.

For example, a command line for Setup might be

setup.exe /l Custom\NewSetup.lst /q1

The /l option directs Setup to use your custom LST, STF, and INF files in the Custom subfolder. The /q1 option directs Setup to run without further user intervention, displaying only progress indicators to the user. For a description of all the available Setup command­line options, see Appendix B, "Setup Command-Line Options and File Formats."

By placing this command line in a batch file that the user can run, you can create a simple mechanism for users to launch a customized version of Office client Setup.

Push Installation

In a push installation, you initiate client Setup automatically with no user intervention. This can be done by putting the customized Setup command line in the user's system logon script, so Office installation is initiated the next time the user logs on to the network.

You can also use a network administration tool, such as Microsoft Systems Management Server, to initiate a push installation. For more information, see the following section, "Using Microsoft Systems Management Server to Install Office."

Using Microsoft Systems Management Server to Install Office

You can use a network administration tool, such as Microsoft Systems Management Server, to distribute a customized version of Office client Setup to your users.

Microsoft Systems Management Server version 1.2 helps you automate large­scale deployment of Office by performing an automatic installation that requires no intervention from you or the user.

Important   This section supplements the Microsoft Systems Management Server documentation; it does not replace it. The procedures that follow provide additional information for using Systems Management Server to install Office, but they do not cover all Systems Management Server options and features. For complete information, see the Microsoft Systems Management Server Administrator's Guide.

To use Systems Management Server to distribute Office, perform the following steps:

1. Create a package for Office. A package consists of a folder (the package source folder that contains all the Office installation files) and a package definition file (PDF). The PDF describes the Setup commands that can be used to install Office on client computers.

2. Create and run a job to distribute the package. A job consists of a package and a list of destination client computers. Systems Management Server copies the package to distribution servers servicing the client computers and executes the jobs on the client computers.

Note   Before you use Systems Management Server to install Office, you must create an administrative installation point on a server. Systems Management Server uses the administrative installation point as the package source folder. For more information, see "Installing Office from the Network" in Chapter 4, "Installing Microsoft Office."

To install Office on your users' computers, you create a package to run Setup using the standard Typical, Custom, or Run from Network Server installation types, or using a Setup script you have customized. Once the package is created, you create a Run On Workstation job to execute Setup on the user computers that you designate.

Creating a Package for Office

You create a package for Office by using the Systems Management Server Administrator program and importing the Office PDF. The Office PDF is located in the main Office folder in the administrative installation point and is named Off97std.pdf (Standard Edition) or Off97pro.pdf (Professional Edition).

The Office PDF file contains command definitions for the standard installation types: Typical and Custom, as well as the complete installation (a Custom installation with all the Office components selected) and Uninstall options. Each of these command definitions contains a Setup command line that directs Setup to run in batch mode with the specific installation type (except for Custom, which always runs interactively).

For example, the following command­line installs a Typical installation using your customized Setup files:

CommandLine = setup.exe /l Custom\NewSetup.lst /q1 /b1

The /l command­line option in this example directs Setup to use your custom LST file in the Custom subfolder. The /q1 command­line option directs Setup to run with no user interaction, and the /b1 option directs Setup to use the Typical installation type. When this command is run from the Systems Management Server package, Setup automatically installs Office using the options you defined for the Typical installation type in your custom STF file. For a description of all the available Setup command­line options, see Appendix B, "Setup Command­Line Options and File Formats."

To use one of the standard Office installation types for installing Office on your client computers, create a package using the unmodified Office PDF.

To create an Office Setup package

1. Start the Systems Management Server Administrator program and switch to the Packages window.

2. On the File menu, click New.

3. In the Package Properties dialog box, click Import.

4. In the File Browser dialog box, select the appropriate PDF file (Off97std.pdf or Off97pro.pdf) and then click OK.

   The PDF file is located in the administrative installation point in the folder containing the main Office application files.

5. In the Package Properties dialog box, click Workstations.

6. In the Source Directory box, enter the location of the administrative installation point for Office.

7. In the Workstation Command Lines box, click the Office installation type you want, and then click Close.

   
   

To create a Setup command that differs from those available in the Office PDF, you add a new command to the Office PDF. For example, if you want Setup to run with your custom Setup files and to generate a log file, then you can add a new command in the PDF that runs Setup using the command­line options /l and /g. You do this with the Systems Management Server Administrator program.

To add a new command to the Office package

1. Start the Systems Management Server Administrator program, switch to the Packages window, and select the package you created for Office.

2. On the File menu, click Properties.

3. In the Package Properties dialog box, click Workstations.

4. In the Source Directory box, enter the location of the administrative installation point for Office, and then click New.

5. In the Command Name box, type a name for the new command.

   For example, type Install Office

6. In the Command Line box, type the command to run your custom Setup.

   For example, to run a Typical installation of Setup with your custom Setup files in full quiet mode, and generating a log file, type the following string:

   setup.exe /l Custom\NewSetup.lst /b1 /qt /g "setup.log"

7. To indicate that no user input is required to run the package, select the Automated Command
   Line check box.

   If you are installing on Windows NT Workstation, you can also select the System (Background) Task check box to indicate that you want the package to run in the background.

8. In the Supported Platforms box, select the appropriate operating systems: Windows 95, Windows NT, or both; and then click OK.

9. In the Workstation Command Lines box, select the command you created, and then click Close.

Note   For more information about creating, modifying, or distributing packages, or for information about other package options available in Systems Management Server, see the Microsoft Systems Management Server Administrator's Guide.

Creating a Job for the Office Package

Once you have created the Systems Management Server package for Office, you create a Run On Workstation job to distribute the package.

To create a Run On Workstation job

1. Start the Systems Management Server Administrator program, and switch to the Jobs window.

2. On the File menu, click New.

3. In the Job Properties dialog box, click Details.

4. In the Package box, click the Office package you created.

5. Under Run Phase, select the Run Workstation Command check box, select one of the Setup commands in the package, and then click OK.

   
   

Important   The previous procedure describes how to create a simple job for the Office package and how to select the appropriate Office Setup command line. To finish creating the job, you must define job targets (user computers) on which to install Office, and you must set the job schedule. For more information about creating and scheduling the job, see the Microsoft Systems Management Server Administrator's Guide.

When the job is executed, Systems Management Server copies all the files from the main Office folder on the administrative installation point to a folder on one or more Systems Management Server distribution servers that service the users on your network. When a user runs the package, Setup is run from within this copy of the administrative installation point.