2.12 Call-Clear-Request

The Call-Clear-Request is a PPTP control message sent by the PNS to the PAC indicating that a particular call is to be disconnected.  The call being cleared can be either an incoming or outgoing call, in any state.  The PAC responds to this message with a Call-Disconnect-Notify message.

       0                   1                   2                   3

       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1

      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

      |            Length             |      PPTP Message Type        |

      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

      |                         Magic Cookie                          |

      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

      |     Control Message Type      |           Reserved0           |

      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

      |            Call ID            |           Reserved1           |

      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

LengthTotal length in octets of this PPTP message, including the entire PPTP header.

PPTP Message Type1 for Control Message.

Magic Cookie0x1A2B3C4D.

Control Message Type12 for Call-Clear-Request.

Reserved0This field MUST be 0.

Call IDThe Call ID assigned by the PNS to this call.  This value is used instead of the Peer's Call ID because the latter may not be known to the PNS if the call must be aborted during call establishment.

Reserved1This field MUST be 0.