| Error | Severity | Description |
|---|---|---|
| 15000 | 16 | Only members of the sysadmin role or the database owner can execute this stored procedure. |
| 15001 | 16 | %s does not exist. |
| 15002 | 16 | The procedure '%s' cannot be executed within a transaction. |
| 15003 | 16 | Only members of the %s role can execute this stored procedure. |
| 15004 | 16 | Name cannot be NULL. |
| 15005 | 0 | Statistics for all tables have been updated. |
| 15006 | 16 | '%s' is not a valid name because it contains invalid characters. |
| 15007 | 16 | The login '%s' does not exist. |
| 15008 | 16 | User '%s' does not exist in the current database. |
| 15009 | 16 | The object '%s' does not exist in database '%s'. |
| 15010 | 16 | The database '%s' does not exist. Use sp_helpdb to show available databases. |
| 15011 | 16 | Database option '%s' does not exist. |
| 15012 | 16 | The device '%s' does not exist. Use sp_helpdevice to show available devices. |
| 15013 | 0 | Table '%s': No columns without statistics found. |
| 15014 | 16 | The role '%s' does not exist in the current database. |
| 15015 | 16 | The server '%s' does not exist. Use sp_helpserver to show available servers. |
| 15016 | 16 | The default '%s' does not exist. |
| 15017 | 16 | The rule '%s' does not exist. |
| 15018 | 0 | Table '%s': Creating statistics for the following columns: |
| 15019 | 16 | The extended stored procedure '%s' does not exist. |
| 15020 | 0 | Statistics have been created for the %d listed columns of the above tables. |
| 15021 | 16 | There are no remote users mapped to any local user from remote server '%s'. |
| 15022 | 16 | The specified user name is already aliased. |
| 15023 | 16 | User or role '%s' already exists in the current database. |
| 15024 | 16 | The group '%s' already exists in the current database. |
| 15025 | 16 | The login '%s' already exists. |
| 15026 | 16 | Logical device '%s' already exists. |
| 15027 | 16 | There are no remote users mapped to local user '%s' from remote server '%s'. |
| 15028 | 16 | The server '%s' already exists. |
| 15029 | 16 | The data type '%s' already exists in the current database. |
| 15030 | 16 | The read-only bit cannot be turned off because the database is in standby mode. |
| 15031 | 0 | 'Virtual_device' device added. |
| 15032 | 16 | The database '%s' already exists. |
| 15033 | 16 | '%s' is not a valid official language name. |
| 15034 | 16 | The application role password must not be NULL. |
| 15035 | 16 | '%s' is not a database device. |
| 15036 | 16 | The data type '%s' does not exist. |
| 15037 | 16 | The physical data type '%s' does not allow nulls. |
| 15038 | 16 | User-defined data types based on timestamp are not allowed. |
| 15039 | 16 | The language %s already exists in syslanguages. |
| 15040 | 16 | User-defined error messages must have an ID greater than 50000. |
| 15041 | 16 | User-defined error messages must have a severity level between 1 and 25. |
| 15042 | 16 | Only members of the sysadmin role can add messages with severity levels greater than 18 or those which use the TRUE (for WITH_LOG) option. |
| 15043 | 16 | You must specify 'REPLACE' to overwrite an existing message. |
| 15044 | 16 | ''%s' is an unknown device type. Use 'disk', 'tape', or 'pipe'. |
| 15045 | 16 | The logical name cannot be NULL. |
| 15046 | 16 | The physical name cannot be NULL. |
| 15047 | 16 | The only permitted options for a tape device are 'skip' and 'noskip'. |
| 15048 | 0 | Valid values of database compatibility level are %d, %d, or %d. |
| 15049 | 11 | Cannot unbind from '%s'. Use ALTER TABLE DROP CONSTRAINT. |
| 15050 | 11 | Cannot bind default '%s'. The default must be created using the CREATE DEFAULT statement. |
| 15051 | 11 | Cannot rename the table because it is published for replication. |
| 15052 | 0 | Prior to updating sysdatabases entry for database '%s', mode = %d and status = %d (status suspect_bit = %d). |
| 15053 | 16 | Objects exist which are not owned by the database owner. |
| 15054 | 0 | The current compatibility level is %d. |
| 15055 | 11 | Error. Updating sysdatabases returned @@error <> 0. |
| 15056 | 0 | No row in sysdatabases was updated because mode and status are already correctly reset. No error and no changes made. |
| 15057 | 16 | List of %s name contains spaces, which are not allowed. |
| 15058 | 16 | List of %s has too few names. |
| 15059 | 16 | List of %s has too many names. |
| 15060 | 16 | List of %s names contains name(s) which have '%s' non-alphabetic characters. |
| 15061 | 16 | Add device request denied. A physical device named '%s' already exists. |
| 15062 | 16 | The guest user cannot be mapped to a login name. |
| 15063 | 16 | The login already has an account under a different user name. |
| 15064 | 11 | PRIMARY KEY and UNIQUE KEY constraints do not have space allocated. |
| 15065 | 16 | All user IDs have been assigned. |
| 15066 | 16 | A default-name mapping of a remote login from remote server '%s' already exists. |
| 15067 | 16 | '%s' is not a local user. Remote login denied. |
| 15068 | 16 | A remote user '%s' already exists for remote server '%s'. |
| 15069 | 16 | One or more users are using the database. The requested operation cannot be completed. |
| 15070 | 0 | Object '%s' was successfully marked for recompilation. |
| 15071 | 16 | Usage: sp_addmessage <msgnum>,<severity>,<msgtext> [,<language> [,FALSE | TRUE [,REPLACE]]] |
| 15072 | 16 | Usage: sp_addremotelogin remoteserver [, loginame [,remotename]] |
| 15073 | 0 | For row in sysdatabases for database '%s', the status bit %d was forced off and mode was forced to 0. |
| 15074 | 0 | Warning: You must recover this database prior to access. |
| 15075 | 16 | The data type '%s' is reserved for future use. |
| 15076 | 16 | Default, table, and user data types must be in the current database. |
| 15077 | 16 | Rule, table, and user data type must be in the current database. |
| 15078 | 16 | The table or view must be in the current database. |
| 15079 | 10 | Queries processed: %d. |
| 15082 | 11 | NULL is not an acceptable parameter value for this procedure. Use a percent sign instead. |
| 15084 | 16 | The column or user data type must be in the current database. |
| 15085 | 16 | Usage: sp_addtype name, 'data type' [,'NULL' | 'NOT NULL'] |
| 15086 | 16 | Invalid precision specified. Precision must be between 1 and 38. |
| 15087 | 16 | Invalid scale specified. Scale must be less than precision and positive. |
| 15088 | 16 | The physical data type is fixed length. You cannot specify the length. |
| 15089 | 11 | Cannot change the '%s' option of a database while another user is in the database. |
| 15090 | 16 | There is already a local server. |
| 15091 | 16 | You must specify a length with this physical data type. |
| 15092 | 16 | Invalid length specified. Length must be between 1 and 8000 bytes. |
| 15093 | 16 | '%s' is not a valid date order. |
| 15094 | 16 | '%s' is not a valid first day. |
| 15095 | 16 | Insert into syslanguages failed. Language not added. |
| 15096 | 16 | Only members of the sysadmin role or '%s' can change the default language for '%s'. |
| 15100 | 16 | Usage: sp_bindefault defaultname, objectname [, 'futureonly'] |
| 15101 | 16 | Cannot bind a default to a column of data type timestamp. |
| 15102 | 16 | Cannot bind a default to an identity column. |
| 15103 | 16 | Cannot bind a default to a column created with or altered to have a default value. |
| 15104 | 16 | You do not own a table named '%s' that has a column named '%s'. |
| 15105 | 16 | You do not own a data type with that name. |
| 15106 | 16 | Usage: sp_bindrule rulename, objectname [, 'futureonly'] |
| 15107 | 16 | Cannot bind a rule to a column of data type text, ntext, image, or timestamp. |
| 15108 | 16 | Only members of the sysadmin role can change the owner of a database. |
| 15109 | 16 | Cannot change the owner of the master database. |
| 15110 | 16 | The proposed new database owner is already a user in the database. |
| 15111 | 16 | The proposed new database owner is already aliased in the database. |
| 15123 | 16 | The configuration option '%s' does not exist, or it may be an advanced option. |
| 15124 | 16 | The configuration option '%s' is not unique. |
| 15125 | 16 | Only members of the sysadmin role can change configuration parameters. |
| 15127 | 16 | Cannot set the default language to a language ID not defined in syslanguages. |
| 15129 | 16 | '%d' is not a valid value for configuration option '%s'. |
| 15131 | 16 | Usage: sp_dbremove <dbname> [,dropdev] |
| 15132 | 16 | Cannot change default database belonging to someone else. |
| 15134 | 16 | No alias exists for the specified user. |
| 15139 | 16 | The device is a RAM disk and cannot be used as a default device. |
| 15140 | 16 | Usage: sp_diskdefault logicalname {defaulton | defaultoff} |
| 15142 | 16 | Cannot drop the role '%s'. |
| 15143 | 16 | '%s' is not a valid option for the @updateusage parameter. Enter either 'true' or 'false'. |
| 15144 | 16 | The role has members. It must be empty before it can be dropped. |
| 15174 | 16 | Login '%s' owns one or more database(s). Change the owner of the following database(s) before dropping login: |
| 15175 | 16 | Login '%s' is aliased or mapped to a user in one or more database(s). Drop the user or alias before dropping the login. |
| 15176 | 16 | The only valid @parameter value is 'WITH_LOG'. |
| 15177 | 16 | Usage: sp_dropmessage <msg number> [,<language> | 'ALL'] |
| 15178 | 16 | Cannot drop a message with an ID less than 50000. |
| 15179 | 16 | Message number %u does not exist. |
| 15180 | 16 | Cannot drop. The data type is being used. |
| 15181 | 16 | Cannot drop the database owner. |
| 15182 | 16 | Cannot drop the guest user from master or tempdb. |
| 15183 | 16 | The user owns objects in the database and cannot be dropped. |
| 15184 | 16 | The user owns data types in the database and cannot be dropped. |
| 15185 | 16 | There is no remote user '%s' mapped to local user '%s' from the remote server '%s'. |
| 15190 | 16 | There are still remote logins for the server '%s'. |
| 15191 | 16 | Usage: sp_dropserver server [, droplogins] |
| 15193 | 16 | This procedure can only be used on system tables. |
| 15194 | 16 | Cannot re-create index on this table. |
| 15197 | 16 | There is no text for object '%s'. |
| 15198 | 16 | The name supplied (%s) is not a user, role, or aliased login. |
| 15200 | 16 | There are no remote servers defined. |
| 15201 | 16 | There are no remote logins for the remote server '%s'. |
| 15202 | 16 | There are no remote logins defined. |
| 15203 | 16 | There are no remote logins for '%s'. |
| 15204 | 16 | There are no remote logins for '%s' on remote server '%s'. |
| 15205 | 16 | There are no servers defined. |
| 15206 | 16 | Invalid Remote Server Option: '%s'. |
| 15210 | 16 | Only members of the sysadmin role can use the loginame option. The password was not changed. |
| 15211 | 16 | Old (current) password incorrect for user. The password was not changed. |
| 15216 | 16 | '%s' is not a valid option for the @delfile parameter. |
| 15218 | 16 | Object '%s' is not a table. |
| 15219 | 16 | You do not own table '%s'. Only members of the sysadmin role or the table owner may perform this action. |
| 15220 | 16 | Usage: sp_remoteoption [remoteserver, loginame, remotename, optname, {true | false}] |
| 15221 | 16 | Remote login option does not exist or cannot be set by user. Run sp_remoteoption with no parameters to see options. |
| 15222 | 16 | Remote login option '%s' is not unique. |
| 15223 | 11 | Error: The input parameter '%s' is not allowed to be null. |
| 15224 | 11 | Error: The value for the @newname parameter contains invalid characters or violates a basic restriction (%s). |
| 15225 | 11 | No item by the name of '%s' could be found in the current database '%s', given that @itemtype was input as '%s'. |
| 15226 | 16 | Only members of the sysadmin role can change the name of a database. |
| 15227 | 16 | The database '%s' cannot be renamed. |
| 15228 | 16 | A member of the sysadmin role must set database '%s' to single user mode with sp_dboption before it can be renamed. |
| 15229 | 16 | Usage: sp_serveroption [server [,optname [,'true' | 'false']]] |
| 15230 | 16 | Server option '%s' does not exist or cannot be set by user. Run sp_serveroption with no parameters to see options. |
| 15231 | 16 | Server option '%s' is not unique. |
| 15232 | 16 | Only members of the sysadmin role may set server options. |
| 15234 | 16 | Object is stored in sysprocedures and has no space allocated directly. |
| 15235 | 16 | Views do not have space allocated. |
| 15236 | 16 | Column '%s' has no default. |
| 15237 | 16 | User data type '%s' has no default. |
| 15238 | 16 | Column '%s' has no rule. |
| 15239 | 16 | User data type '%s' has no rule. |
| 15241 | 16 | Usage: sp_dboption [dbname [,optname [,'true' | 'false']]] |
| 15242 | 16 | Database option '%s' is not unique. |
| 15243 | 16 | The option '%s' cannot be changed for the master database. |
| 15244 | 16 | Only members of the sysadmin role or the database owner may set database options. |
| 15245 | 16 | DBCC DBCONTROL error. Database was not placed offline. |
| 15248 | 11 | Error: The parameter @oldname is either ambiguous or the claimed @itemtype (%s) was wrong. |
| 15249 | 11 | Error: Explicit @itemtype '%s' is unrecognized (%d). |
| 15250 | 16 | The database name component of the object qualifier must be the name of the current database. |
| 15251 | 16 | Invalid '%s' specified. It must be %s. |
| 15252 | 16 | The primary or foreign key table name must be given. |
| 15253 | 11 | Syntax error parsing SQL identifier '%s'. |
| 15254 | 16 | Users other than the database owner or guest exist in the database. Drop them before removing the database. |
| 15255 | 11 | '%s' is not a valid value for @autofix. The only valid value is 'auto'. |
| 15256 | 16 | Usage: sp_certify_removable <dbname> [,'auto'] |
| 15257 | 16 | The database that you are attempting to certify cannot be in use at the same time. |
| 15258 | 16 | The database must be owned by a member of the sysadmin role before it can be removed. |
| 15261 | 16 | Usage: sp_create_removable <dbname>,<syslogical>,<sysphysical>,<syssize>,<loglogical>,<logphysical>,<logsize>,<datalogical1>,<dataphysical1>,<datasize1> [,<datalogical2>,<dataphysical2>,<datasize2>...<datalogical16>,<dataphysical16>,<datasize16>] |
| 15262 | 0 | Invalid file size entered. All files must be at least 1 MB. |
| 15264 | 16 | Could not create the '%s' portion of the database. |
| 15266 | 16 | Cannot make '%s' database removable. |
| 15269 | 16 | Logical data device '%s' not created. |
| 15270 | 16 | You cannot specify a length for user data types based on sysname. |
| 15271 | 16 | Invalid @with_log parameter value. Valid values are 'true' or 'false'. |
| 15275 | 16 | FOREIGN KEY constraints do not have space allocated. |
| 15277 | 16 | The only valid @parameter_value values are 'true' or 'false'. |
| 15278 | 16 | Login '%s' is already mapped to user '%s' in database '%s'. |
| 15279 | 16 | You must add the us_english version of this message before you can add the '%s' version. |
| 15280 | 16 | All localized versions of this message must be dropped before the us_english version can be dropped. |
| 15283 | 16 | The name '%s' contains too many characters. |
| 15284 | 16 | The user has granted or revoked privileges to the following in the database and cannot be dropped. |
| 15285 | 16 | The special word '%s' cannot be used for a logical device name. |
| 15286 | 16 | Terminating this procedure. The @action '%s' is unrecognized. Try 'REPORT', 'UPDATE_ONE', or 'AUTO_FIX'. |
| 15287 | 16 | Terminating this procedure. '%s' is a forbidden value for the login name parameter in this procedure. |
| 15288 | 16 | Terminating this procedure. Only %s has the permissions to run the action '%s'. |
| 15289 | 16 | Terminating this procedure. Cannot have an open transaction when this is run. |
| 15290 | 16 | Terminating this procedure. The Action '%s' is incompatible with the other parameter values ('%s', '%s'). |
| 15291 | 16 | Terminating this procedure. The %s name '%s' is absent or invalid. |
| 15292 | 0 | The row for user '%s' will be fixed by updating its login link to a login already in existence. |
| 15293 | 0 | Barring a conflict, the row for user '%s' will be fixed by updating its link to a new login. Consider changing the new password from null. |
| 15294 | 0 | The number of orphaned users fixed by adding new logins and then updating users was %d. |
| 15295 | 0 | The number of orphaned users fixed by updating users was %d. |
| 15298 | 0 | New login created. |
| 15300 | 11 | No recognized letter is contained in the parameter value for General Permission Type (%s). Valid letters are in this set: %s . |
| 15302 | 11 | Database_Name should not be used to qualify owner.object for the parameter into this procedure. |
| 15303 | 11 | The "user options" config value (%d) was rejected because it would set incompatible options. |
| 15304 | 16 | The severity level of the '%s' version of this message must be the same as the severity level (%ld) of the us_english version. |
| 15305 | 16 | The @TriggerType parameter value must be 'insert', 'update', or 'delete'. |
| 15306 | 16 | Cannot change the compatibility level of replicated or distributed databases. |
| 15307 | 16 | Could not change the merge publish option because the server is not set up for replication. |
| 15308 | 16 | You must set database '%s' to single user mode with sp_dboption before fixing indexes on system tables. |
| 15311 | 16 | The file named '%s' does not exist. |
| 15312 | 16 | The file named '%s' is a primary file and cannot be removed. |
| 15318 | 0 | All fragments for database '%s' on device '%s' are now dedicated for log usage only. |
| 15319 | 17 | Error: DBCC DBREPAIR REMAP failed for database '%s' (device '%s'). |
| 15321 | 16 | There was some problem removing '%s' from sysaltfiles. |
| 15322 | 0 | File '%s' was removed from tempdb, and will take effect upon server restart. |
| 15323 | 16 | The selected index does not exist on table '%s'. |
| 15324 | 16 | The option %s cannot be changed for the '%s' database. |
| 15325 | 16 | The current database does not contain a %s named '%ls'. |
| 15326 | 0 | No extended stored procedures exist. |
| 15327 | 0 | The database is now offline. |
| 15328 | 0 | The database is offline already. |
| 15330 | 11 | There are no matching rows on which to report. |
| 15331 | 11 | The user '%s' cannot take the action auto_fix because another user has SUID = %d. |
| 15333 | 11 | Error: the qualified @oldname references a database (%s) other than the current database. |
| 15334 | 11 | Error: Only members of the sysadmin role or the database owner can rename items they do not own. |
| 15335 | 11 | Error: The @newname value '%s' is already in use as a %s name and would cause a duplicate that is not permitted. |
| 15337 | 0 | Caution: sysdepends shows that other objects (views, procedures and so on) are referencing this object by its old name. These objects will become invalid, and should be dropped and re-created promptly. |
| 15338 | 0 | The %s was renamed to '%s'. |
| 15339 | 0 | Creating '%s'. |
| 15340 | 0 | Alias user added. |
| 15341 | 0 | Granted database access to '%s'. |
| 15342 | 0 | Replacing message. |
| 15343 | 0 | New message added. |
| 15354 | 0 | Usage: sp_detachdb <dbname>, [TRUE|FALSE] |
| 15358 | 0 | User-defined filegroups should be made read-only. |
| 15363 | 16 | The role '%s' already exists in the current database. |
| 15379 | 11 | The server option value '%s' supplied is unrecognized. |
| 15386 | 11 | For input parameter @OptionName you entered the value '%s'. The number of valid option names matching this value is %d (not equal to 1). Terminating this procedure. |
| 15387 | 11 | If the qualified object name specifies a database, that database must be the current database. |
| 15388 | 11 | There are no objects matching the input name '%s' in the current database. |
| 15389 | 11 | The value '%s' for the @OptionValue parameter is unrecognized. |
| 15390 | 11 | Only members of the sysadmin role or the database owner can modify '%s' settings for objects owned by other users. |
| 15391 | 0 | All %d matched objects now have their '%s' setting as '%s'. Updates were required for %d objects. |
| 15392 | 11 | Only members of the sysadmin role can modify the settings for option %s. |
| 15393 | 16 | Commit service transaction (XACT) ID does not exist. |
| 15395 | 11 | The qualified old name could not be found for item type '%s'. |
| 15396 | 11 | Cannot change option %s for an object without first performing a DROP statement then a CREATE statement. |
| 15397 | 11 | Could not change option %s. Not more than one object can be changed per execution for this option. %d objects match the parameter values in the current attempt. |
| 15398 | 11 | Only objects in the master database and owned by a member of the sysadmin role can have the setting changed for option %s. |
| 15399 | 11 | Could not change option %s. This type of change is restricted to objects that have no parameters or columns. |
| 15400 | 11 | Could not change an object of type %s. The setting of option %s cannot be changed for objects of this type. Bypassing object '%s'. Other valid, matching objects will be processed now. |
| 15401 | 11 | Windows NT user or group '%s' not found. Check the name again. |
| 15402 | 11 | '%s' is not a fixed server role. |
| 15403 | 11 | Insufficient permission to add a member to the fixed role '%s'. |
| 15405 | 11 | Cannot use the reserved user or role name '%s'. |
| 15407 | 11 | '%s' is not a valid Windows NT name. Give the complete name: <domain\username>. |
| 15409 | 11 | '%s' is not a role. |
| 15410 | 11 | User or role '%s' does not exist in this database. |
| 15412 | 11 | '%s' is not a known fixed role. |
| 15413 | 11 | Cannot make a role a member of itself. |
| 15415 | 11 | User is a member of more than one group. sp_changegroup is set up for backward compatibility and expects membership in one group at most. |
| 15416 | 16 | Usage: sp_dbcmptlevel [dbname [, compatibilitylevel]] |
| 15417 | 16 | Insufficient permission to change the compatibility level of the '%s' database. |
| 15418 | 16 | Only members of the sysadmin role or the database owner may set the database compatibility level. |
| 15419 | 16 | Supplied parameter @sid should be binary(16). |
| 15420 | 16 | The group '%s' does not exist in this database. |
| 15421 | 16 | The user owns role(s) in the database and cannot be dropped. |
| 15422 | 16 | Application roles can only be activated at the ad hoc level. |
| 15423 | 0 | The password for application role '%s' has been changed. |
| 15424 | 0 | New role added. |
| 15425 | 0 | New application role added. |
| 15426 | 16 | You must specify a provider name with this set of properties. |
| 15427 | 16 | You must specify a provider name for unknown product '%ls'. |
| 15428 | 16 | You cannot specify a provider or any properties for product '%ls'. |
| 15429 | 16 | '%ls' is an invalid product name. |
| 15430 | 19 | Limit exceeded for number of servers. |
| 15431 | 16 | You must specify the @rolename parameter. |
| 15432 | 16 | Stored procedure '%s' can only be executed at the ad hoc level. |
| 15433 | 16 | Supplied parameter @sid is in use. |
| 15434 | 16 | Could not drop login '%s' as the user is currently logged in. |
| 15435 | 0 | Database successfully published. |
| 15436 | 0 | Database successfully enabled for subscriptions. |
| 15437 | 0 | Database successfully published using merge replication. |
| 15438 | 0 | Database is already online. |
| 15439 | 0 | Database is now online. |
| 15440 | 0 | Database is no longer published. |
| 15441 | 0 | Database is no longer enabled for subscriptions. |
| 15442 | 0 | Database is no longer enabled for merge publications. |
| 15443 | 0 | Checkpointing database that was changed. |
| 15444 | 0 | 'Disk' device added. |
| 15445 | 0 | 'Diskette' device added. |
| 15446 | 0 | 'Tape' device added. |
| 15447 | 0 | 'Pipe' device added. |
| 15448 | 0 | New remote login created. |
| 15449 | 0 | Type added. |
| 15450 | 0 | New language inserted. |
| 15451 | 0 | %s messages altered. |
| 15452 | 0 | No alternate languages are available. |
| 15453 | 0 | us_english is always available, even though it is not in syslanguages. |
| 15454 | 0 | Language deleted. |
| 15456 | 0 | Valid configuration options are: |
| 15457 | 0 | Configuration option changed. Run the RECONFIGURE statement to install. |
| 15458 | 0 | Database removed. |
| 15459 | 0 | In the current database, the specified object references the following: |
| 15460 | 0 | In the current database, the specified object is referenced by the following: |
| 15461 | 0 | Object does not reference any object, and no objects reference it. |
| 15462 | 0 | File '%s' closed. |
| 15463 | 0 | Device dropped. |
| 15466 | 0 | Message dropped. |
| 15467 | 0 | Type has been dropped. |
| 15468 | 0 | Remote login dropped. |
| 15469 | 0 | No constraints have been defined for this object. |
| 15470 | 0 | No foreign keys reference this table. |
| 15471 | 0 | The object comments have been encrypted. |
| 15472 | 0 | The object does not have any indexes. |
| 15473 | 0 | Settable remote login options. |
| 15474 | 11 | Only members of the sysadmin role can set remote login options. |
| 15475 | 0 | The database is renamed and in single user mode. |
| 15476 | 0 | A member of the sysadmin role must reset the database to multiuser mode with sp_dboption. |
| 15477 | 0 | Caution: Changing any part of an object name could break scripts and stored procedures. |
| 15478 | 0 | Password changed. |
| 15479 | 0 | Login dropped. |
| 15480 | 0 | Could not grant login access to '%s'. |
| 15481 | 0 | Granted login access to '%s'. |
| 15482 | 0 | Could not deny login access to '%s'. |
| 15483 | 0 | Denied login access to '%s'. |
| 15484 | 0 | Could not revoke login access from '%s'. |
| 15485 | 0 | Revoked login access from '%s'. |
| 15486 | 0 | Default database changed. |
| 15487 | 0 | %s's default language is changed to %s. |
| 15488 | 0 | '%s' added to role '%s'. |
| 15489 | 0 | '%s' dropped from role '%s'. |
| 15490 | 0 | The dependent aliases were also dropped. |
| 15491 | 0 | User has been dropped from current database. |
| 15492 | 0 | Alias user dropped. |
| 15493 | 0 | Role dropped. |
| 15494 | 0 | The application role '%s' is now active. |
| 15495 | 0 | Application role dropped. |
| 15496 | 0 | Group changed. |
| 15497 | 0 | Could not add login using sp_addlogin (user = %s). Terminating this procedure. |
| 15498 | 17 | Inside txn_1a_, update failed. Will roll back (1a1). |
| 15499 | 0 | The dependent aliases were mapped to the new database owner. |
| 15500 | 0 | The dependent aliases were dropped. |
| 15501 | 0 | Database owner changed. |
| 15502 | 0 | Setting database owner to SA. |
| 15503 | 0 | Giving ownership of all objects to the database owner. |
| 15504 | 0 | Deleting users except guest and the database owner from sysusers. |
| 15505 | 0 | The object owner has been changed. |
| 15506 | 0 | Server added. |
| 15507 | 0 | Remote logins for remote server '%s' have been dropped. |
| 15508 | 0 | Server dropped. |
| 15509 | 0 | Settable server options. |
| 15510 | 0 | Server network name set. |
| 15511 | 0 | Default bound to column. |
| 15512 | 0 | Default bound to data type. |
| 15513 | 0 | The new default has been bound to columns(s) of the specified user data type. |
| 15514 | 0 | Rule bound to table column. |
| 15515 | 0 | Rule bound to data type. |
| 15516 | 0 | The new rule has been bound to column(s) of the specified user data type. |
| 15517 | 0 | Option %s turned on. |
| 15518 | 0 | Option %s turned off. |
| 15519 | 0 | Default unbound from table column. |
| 15520 | 0 | Default unbound from data type. |
| 15521 | 0 | Columns of the specified user data type had their defaults unbound. |
| 15522 | 0 | Rule unbound from table column. |
| 15523 | 0 | Rule unbound from data type. |
| 15524 | 0 | Columns of the specified user data type had their rules unbound. |
| 15525 | 0 | sp_checknames is used to search for non 7-bit ASCII characters. |
| 15526 | 0 | in several important columns of system tables. The following |
| 15527 | 0 | columns are searched: |
| 15528 | 0 | In master: |
| 15536 | 0 | In all databases: |
| 15543 | 0 | Looking for non 7-bit ASCII characters in the system tables of database '%s'. |
| 15544 | 0 | Table.column '%s' |
| 15545 | 0 | The following database names contain non 7-bit ASCII characters. |
| 15546 | 0 | If you wish to change these names, use '%s'. |
| 15547 | 0 | The following logins have default database names that contain |
| 15548 | 0 | non 7-bit ASCII characters. If you wish to change these names use |
| 15549 | 0 | sp_defaultdb. |
| 15550 | 0 | The following servers have 'initialization file' names that contain |
| 15551 | 0 | non 7-bit ASCII characters. If you wish to change these names, |
| 15552 | 0 | use UPDATE. |
| 15553 | 0 | Database '%s' has no object, user, and so on |
| 15554 | 0 | names that contain non 7-bit ASCII characters. |
| 15555 | 0 | The database name provided '%s' must be the current database when executing this stored procedure. |
| 15564 | 0 | The following device names contain non 7-bit ASCII characters. |
| 15565 | 0 | The following login names contain non 7-bit ASCII characters. |
| 15566 | 0 | The following remote login names contain non 7-bit ASCII characters. |
| 15567 | 0 | The following server names contain non 7-bit ASCII characters. |
| 15568 | 0 | The following column and parameter names contain non 7-bit ASCII characters. |
| 15569 | 0 | The following index names contain non 7-bit ASCII characters. |
| 15570 | 0 | The following object names contain non 7-bit ASCII characters. |
| 15571 | 0 | The following segment names contain non 7-bit ASCII characters. |
| 15572 | 0 | The following data type names contain non 7-bit ASCII characters. |
| 15573 | 0 | The following user or role names contain non 7-bit ASCII characters. |
| 15600 | 15 | An invalid parameter or option was specified for procedure '%s'. |
| 15601 | 16 | Fulltext Search is not enabled for the current database. Use sp_fulltext_database to enable full-text search. |
| 15602 | 16 | Full-Text catalog '%ls' does not exist. |
| 15603 | 16 | A full-text catalog named '%ls' already exists in this database. |
| 15604 | 16 | Cannot drop full-text catalog '%ls' because it contains a full-text index. |
| 15605 | 16 | A full-text index for table '%ls' has already been created. |
| 15606 | 16 | You must first create a full-text index on table '%ls'. |
| 15607 | 16 | '%ls' is not a valid index to enforce a full-text search key. You must specify a unique, non-nullable, single-column index. |
| 15608 | 16 | Full-text search has already been activated for table '%ls'. |
| 15609 | 16 | Cannot activate full-text search for table '%ls' because no columns have been enabled for full-text search. |
| 15610 | 16 | You must deactivate full-text search on table '%ls' before adding columns to or removing columns from the full-text index. |
| 15611 | 16 | Column '%ls' of table '%ls' cannot be used for full-text search because it is not a character-based column. |
| 15612 | 16 | DBCC DBCONTROL error. Database was not made read-only. |
| 15613 | 0 | The database is now read-only. |
| 15614 | 0 | The database already is read-only. |
| 15615 | 16 | DBCC DBCONTROL error. Database was not made single user. |
| 15616 | 0 | The database is now single user. |
| 15617 | 0 | The database already is single user. |
| 15618 | 0 | The database is now read/write. |
| 15619 | 0 | The database already is read/write. |
| 15620 | 0 | The database is now multiuser. |
| 15621 | 0 | The database already is multiuser. |
| 15622 | 10 | No permission to access database '%s'. |