The following error values are defined in the header file Sqlfront.h. Note that errors with a severity of EXCOMM also have a network-related error message appended to the dberrstr value. EXCOMM errors also have network-specific error information in oserr and oserrstr.
| Error # | Error | Severity | Description |
|---|---|---|---|
| 10000 | SQLEMEM | EXRESOURCE | Unable to allocate sufficient memory. |
| 10001 | SQLENULL | EXPROGRAM | NULL DBPROCESS pointer encountered. |
| 10002 | SQLENLOG | EXCONSISTENCY | NULL LOGINREC pointer encountered. |
| 10003 | SQLEPWD | EXUSER | Login incorrect. |
| 10004 | SQLECONN | EXCOMM | Unable to connect: Microsoft® SQL Server™ is unavailable or does not exist. |
| 10005 | SQLEDDNE | EXINFO | DBPROCESS is dead or not enabled. |
| 10006 | SQLENULLO | EXCONSISTENCY | Attempt to login with NULL LOGINREC. |
| 10007 | SQLESMSG | EXSERVER | General SQL Server error: Check messages from SQL Server. |
| 10008 | SQLEBTOK | EXCOMM | Bad token from SQL Server: Datastream processing out of synchronization. |
| 10009 | SQLENSPE | EXPROGRAM | General nonspecific DB-Library error. |
| 10010 | SQLEREAD | EXCOMM | Read from SQL Server failed. |
| 10011 | SQLECNOR | EXPROGRAM | Column number out of range. |
| 10012 | SQLETSIT | EXINFO | Attempt to call dbtsput with an invalid timestamp. |
| 10013 | SQLEPARM | EXCONSISTENCY | Invalid parameter in DB-Library function reference. |
| 10014 | SQLEAUTN | EXPROGRAM | Attempt to update the timestamp of a table with no timestamp column. |
| 10015 | SQLECOFL | EXCONVERSION | Data conversion resulted in overflow. |
| 10016 | SQLERDCN | EXCONVERSION | Requested data conversion does not exist. |
| 10017 | SQLEICN | EXPROGRAM | Invalid value for computeid or invalid compute column number. |
| 10018 | SQLECLOS | EXCOMM | Error in closing network connection. |
| 10019 | SQLENTXT | EXPROGRAM | Attempt to get text point/timestamp from a nontext column. |
| 10020 | SQLEDNTI | EXPROGRAM | Attempt to use dbtxtsput to put a new text timestamp into a column whose data type is neither SQLTEXT nor SQLIMAGE. |
| 10021 | SQLETMTD | EXPROGRAM | Attempt to send too much text data through dbmoretext. |
| 10022 | SQLEASEC | EXPROGRAM | Attempt to send an empty command buffer to the SQL Server. |
| 10023 | SQLENTLL | EXUSER | Name too long for LOGINREC field. |
| 10024 | SQLETIME | EXTIME | SQL Server connection timed out. |
| 10025 | SQLEWRIT | EXCOMM | Write to SQL Server failed. |
| 10026 | SQLEMODE | EXCOMM | Network connection not in correct mode; invalid SQL Server connection. |
| 10027 | SQLEOOB | EXCOMM | Error in sending out-of-band data to SQL Server. |
| 10028 | SQLEITIM | EXPROGRAM | Illegal time-out value specified. |
| 10029 | SQLEDBPS | EXRESOURCE | Maximum number of DBPROCESS structures already allocated. |
| 10030 | SQLEIOPT | EXPROGRAM | Attempt to use invalid dboption. |
| 10031 | SQLEASNL | EXPROGRAM | Attempt to set fields in a null LOGINREC. |
| 10032 | SQLEASUL | EXPROGRAM | Attempt to set unknown LOGINREC field. |
| 10033 | SQLENPRM | EXPROGRAM | NULL parameter not allowed for this dboption. |
| 10034 | SQLEDBOP | EXPROGRAM | Invalid or out of range dbn parameter. |
| 10035 | SQLENSIP | EXPROGRAM | Negative starting index passed to dbstrcpy. |
| 10036 | SQLECNULL | EXPROGRAM | NULL destination variable not allowed. |
| 10037 | SQLESEOF | EXCOMM | Unexpected EOF from SQL Server. |
| 10038 | SQLERPND | EXPROGRAM | Attempt to initiate a new SQL Server operation with results pending. |
| 10039 | SQLECSYN | EXCONVERSION | Attempt to convert data stopped by syntax error in source field. |
| 10040 | SQLENONET | EXCOMM | DB-Library network communications layer not loaded. |
| 10041 | SQLEBTYP | EXPROGRAM | Unknown bind type passed to DB-Library function. |
| 10042 | SQLEABNC | EXPROGRAM | Attempt to bind to a nonexistent column. |
| 10043 | SQLEABMT | EXPROGRAM | User attempted a dbbind with mismatched column and variable types. |
| 10044 | SQLEABNP | EXPROGRAM | Attempt to bind using NULL pointers. |
| 10045 | SQLEBNCR | EXPROGRAM | Attempt to bind user variable to a nonexistent compute row. |
| 10046 | SQLEAAMT | EXPROGRAM | User attempted a dbaltbind with mismatched column and variable types. |
| 10047 | SQLENXID | EXNONFATAL | The server did not grant a distributed-transaction ID. |
| 10048 | SQLEIFNB | EXPROGRAM | Illegal field number passed to bcp_control. |
| 10049 | SQLEKBCO | EXINFO | 1000 rows successfully bulk copied to host file. |
| 10050 | SQLEBBCI | EXINFO | Batch successfully bulk copied to SQL Server. |
| 10051 | SQLEKBCI | EXINFO | 1000 rows sent to SQL Server. |
| 10052 | SQLEBCWE | EXNONFATAL | I/O error while writing bcp data file. |
| 10053 | SQLEBCNN | EXUSER | Attempt to bulk copy a null value into a server column that does not accept null values. |
| 10054 | SQLEBCOR | EXCONSISTENCY | Attempt to bulk copy an oversized row to SQL Server. |
| 10055 | SQLEBCPI | EXPROGRAM | Call bcp_init before any other bcp routines. |
| 10056 | SQLEBCPN | EXPROGRAM | Use bcp_bind, bcp_collen, and bcp_colptr only after calling bcp_init with the copy direction set to DB_IN. |
| 10057 | SQLEBCPB | EXPROGRAM | Do not use bcp_bind after bcp_init has been passed a nonnull data file name. |
| 10058 | SQLEVDPT | EXUSER | For bulk copy, all variable-length data must have either a length prefix or a terminator specified. |
| 10059 | SQLEBIVI | EXPROGRAM | Use bcp_columns and bcp_colfmt only after bcp_init has been passed a valid data file. |
| 10060 | SQLEBCBC | EXPROGRAM | Call bcp_columns before bcp_colfmt. |
| 10061 | SQLEBCFO | EXUSER | Host files must contain at least one column: bcp. |
| 10062 | SQLEBCVH | EXPROGRAM | Call bcp_exec only after bcp_init has been passed a valid host file. |
| 10063 | SQLEBCUO | EXRESOURCE | Unable to open host datafile: bcp. |
| 10064 | SQLEBUOE | EXRESOURCE | Unable to open error file: bcp. |
| 10065 | SQLEBWEF | EXNONFATAL | I/O error while writing bcp error file. |
| 10066 | SQLEBTMT | EXPROGRAM | Attempt to send too much text data with bcp_moretext. |
| 10067 | SQLEBEOF | EXNONFATAL | Unexpected EOF encountered in bcp datafile. |
| 10068 | SQLEBCSI | EXCONSISTENCY | Host-file columns may be skipped only when copying into the server. |
| 10069 | SQLEPNUL | EXCONSISTENCY | NULL program pointer encountered. |
| 10070 | SQLEBSKERR | EXCONSISTENCY | Cannot seek in data file. |
| 10071 | SQLEBDIO | EXPROGRAM | Bad bulk-copy direction. |
| 10072 | SQLEBCNT | EXUSER | Attempt to use bulk copy with a nonexistent server table. |
| 10073 | SQLEMDBP | EXPROGRAM | Attempt to set maximum number of DPPROCESS structures lower than 1. |
| 10075 | SQLCRSINV | EXPROGRAM | Invalid cursor statement. |
| 10076 | SQLCRSCMD | EXPROGRAM | Attempt to call cursor functions when there are commands waiting to be executed. |
| 10077 | SQLCRSNOIND | EXINFO | One of the tables involved in the cursor statement does not have a unique index. |
| 10078 | SQLCRSDIS | EXPROGRAM | Cursor statement contains one of the disallowed phrases COMPUTE, UNION, FOR BROWSE, or SELECT INTO. |
| 10079 | SQLCRSAGR | EXPROGRAM | Aggregate functions are not allowed in a cursor statement. |
| 10080 | SQLCRSORD | EXPROGRAM | Only fully keyset driven cursors can have ORDER BY, GROUP BY, or HAVING PHRASES clauses. |
| 10081 | SQLCRSMEM | EXPROGRAM | Keyset or window scroll size exceeds the memory limitations of this computer. |
| 10082 | SQLCRSBSKEY | EXPROGRAM | Keyset cannot be scrolled backward in mixed cursors with a previous fetch type. |
| 10083 | SQLCRSNORES | EXINFO | Cursor statement generated no results. |
| 10084 | SQLCRSVIEW | EXPROGRAM | A view cannot be joined with another table or a view in a cursor statement. |
| 10085 | SQLCRSBUFR | EXPROGRAM | Row buffering should not be turned on when using cursor functions. |
| 10086 | SQLCRSFROWN | EXINFO | Row number to be fetched is outside valid range. |
| 10087 | SQLCRSBROL | EXPROGRAM | Backward scrolling cannot be used in a forward scrolling cursor. |
| 10088 | SQLCRSFRAND | EXPROGRAM | Fetch types RANDOM and RELATIVE can only be used within the keyset of keyset driven cursors. |
| 10089 | SQLCRSFLAST | EXPROGRAM | Fetch type LAST requires fully keyset driven cursors. |
| 10090 | SQLCRSRO | EXPROGRAM | Data locking or modifications cannot be made in a READONLY cursor. |
| 10091 | SQLCRSTAB | EXPROGRAM | Table name must be determined in operations involving data locking or modifications. |
| 10092 | SQLCRSUPDTAB | EXPROGRAM | Update or insert operations using bind variables require single table cursors. |
| 10093 | SQLCRSUPDNB | EXPROGRAM | Update or insert operations cannot use bind variables when binding type is NOBIND. |
| 10094 | SQLCRSVIIND | EXPROGRAM | The view used in the cursor statement does not include all the unique index columns of the underlying tables. |
| 10095 | SQLCRSNOUPD | EXINFO | Update or delete operation did not affect any rows. |
| 10096 | SQLCRSOS2 | EXPROGRAM | Cursors are not supported for this server. |
| 10097 | SQLEBCSA | EXPROGRAM | The BCP hostfile %s contains only %ld rows. Skipping all of these rows is not allowed. |
| 10098 | SQLCRSRO | EXPROGRAM | Data locking or modifications cannot be made in a READONLY cursor. |
| 10099 | SQLEBCNE | EXPROGRAM | The table %s contains only %ld rows. Copying up to row %ld is not possible. |
| 10100 | SQLEBCSK | EXPROGRAM | The table %s contains only %ld rows. Skipping all of these rows is not allowed. |
| 10101 | SQLEUVBF | EXPROGRAM | Attempt to read unknown version of bcp format file. |
| 10102 | SQLEBIHC | EXPROGRAM | Incorrect host-column number found in bcp format file. |
| 10103 | SQLEBWFF | EXRESOURCE | I/O error while reading bcp format file. |
| 10104 | SQLNUMVAL | EXPROGRAM | The data stored in the DBNUMERIC/DBDECIMAL structure is invalid. |
| 10105 | SQLEOLDVR | EXPROGRAM | The SQL Server’s TDS is obsolete with this version of DB-Library. |
| 10106 | SQLEBCPS | EXPROGRAM | The row length exceeds SQL Server’s maximum allowable size. |
| 10107 | SQLEDTC | EXRESOURCE | Microsoft Distributed Transaction Coordinator call failed. |
| 10108 | SQLENOTIMPL | EXPROGRAM | This function is not supported on this platform at this time. |
| 10109 | SQLENONFLOAT | EXPROGRAM | float conversion attempt failed. The source is invalid. |
| 10110 | SQLECONNFB | EXCOMM | Unable to connect: DB Server is unavailable or does not exist - will attempt a fallback connection. |