LINEADDRESSMODE_ Constants

The LINEADDRESSMODE_ bit-flag constants describe various ways of identifying an address on a line device.

LINEADDRESSMODE_ADDRESSID

The address is specified with a small integer in the range 0 to dwNumAddresses minus one, where dwNumAddresses is the value in the line's device capabilities.

LINEADDRESSMODE_DIALABLEADDR

The address is specified through its phone number.

The high-order 16 bits can be assigned for device-specific extensions. The low-order 16 bits are reserved.

This constant is used to select an address on a line on which to originate a call. The usual model would select the address by means of its address identifier. Address identifiers are the mechanism used to identify addresses throughout TAPI. However, in some environments, when making a call, it is often more practical to identify a call's originating address by phone number rather than by address identifier. One example is in the possible modeling of large numbers of stations (third party) on the switch by means of one line device with many addresses. The line represents the set of all stations, and each station is mapped to an address with its own primary phone number and address identifier.

Requirements

  Windows NT/2000: Requires Windows NT 4.0 SP3 or later.
  Windows 95/98: Requires Windows 95 or later.
  Version: Requires TAPI 2.0 or later.
  Header: Declared in Tapi.h.