Platform SDK: TAPI |
The TAPI LINE_MONITORDIGITS message is sent when a digit is detected. The sending of this message is controlled with the lineMonitorDigits function.
LINE_MONITORDIGITS hDevice = (DWORD) hCall; dwCallbackInstance = (DWORD) hCallback; dwParam1 = (DWORD) Digit; dwParam2 = (DWORD) DigitMode; dwParam3 = (DWORD) 0;
No return value.
The LINE_MONITORDIGITS message is sent to the application that has enabled digit monitoring.
Because this timestamp may have been generated on a computer other than the one on which the application is executing, it is useful only for comparison to other similarly timestamped messages generated on the same line device (LINE_GATHERDIGITS, LINE_GENERATE, LINE_MONITORMEDIA, LINE_MONITORTONE), in order to determine their relative timing (separation between events). The tick count can "wrap around" after approximately 49.7 days; applications must take this into account when performing calculations.
If the service provider does not generate the timestamp (for example, if it was created using an earlier version of TAPI), then TAPI provides a timestamp at the point closest to the service provider generating the event so that the synthesized timestamp is as accurate as possible.
Windows NT/2000: Requires Windows NT 4.0 SP3 or later.
Windows 95/98: Requires Windows 95 or later.
Version: Requires TAPI 2.0 or later.
Header: Declared in Tapi.h.
LINE_GATHERDIGITS, LINE_GENERATE, LINE_MONITORMEDIA, LINE_MONITORTONE, lineMonitorDigits