| Platform SDK: TAPI |
The TAPI PHONE_REMOVE message is sent to inform an application of the removal (deletion from the system) of a phone device. Generally, this is not used for temporary removals, such as extraction of PCMCIA devices, but only for permanent removals in which the device would no longer be reported by the service provider if TAPI were reinitialized.
PHONE_REMOVE hDevice = (DWORD) 0; dwCallbackInstance = (DWORD) 0; dwParam1 = (DWORD) hDeviceID; dwParam2 = (DWORD) 0; dwParam3 = (DWORD) 0;
No return value.
Applications TAPI version 2.0 or later are sent a PHONE_REMOVE message. This informs them that the device has been removed from the system. The PHONE_REMOVE message is preceded by a PHONE_CLOSE message on each phone handle, if the application had the phone open. This message is sent to all applications supporting TAPI version 2.0 or later that have called phoneInitializeEx, including those that do not have any phone devices open at the time.
Older applications (that negotiated TAPI version 1.4 or earlier) are sent a PHONE_STATE message specifying PHONESTATE_REMOVED, followed by a PHONE_CLOSE message. Unlike the PHONE_REMOVE message, however, these older applications can receive these messages only if they have the phone open when it is removed. If they do not have the phone open, their only indication that the device was removed would be receiving a PHONEERR_NODEVICE when they attempt to access the device.
After a device has been removed, any attempt to access the device by its device identifier results in a PHONEERR_NODEVICE error. After all TAPI applications have shutdown so that TAPI can restart, and when TAPI is reinitialized, the removed device no longer occupies a device identifier.
Implementation Note It is TAPI that returns this PHONEERR_NODEVICE message after a PHONE_REMOVE message is received from a service provider; no further calls are made to that service provider using that phone device identifier.
Windows NT/2000: Requires Windows NT 4.0 SP3 or later.
Windows 95/98: Requires Windows 95 or later.
Version: Requires TAPI 2.0 or later.
Header: Declared in Tapi.h.
PHONE_CLOSE, PHONE_STATE, phoneInitialize, phoneInitializeEx