_CrtMemCheckpoint

Obtains the current state of the debug heap and stores in an application-supplied _CrtMemState structure (debug version only).

void _CrtMemCheckpoint( _CrtMemState *state );

For additional compatibility information, see Compatibility in the Introduction.

Libraries

Return Value

None

Parameter

state

Pointer to _CrtMemState structure to fill with the memory checkpoint

Remarks

The _CrtMemCheckpoint function creates a snapshot of the current state of the debug heap at any given moment, which can be used by other heap state functions to help detect memory leaks and other problems. When _DEBUG is not defined, calls to _CrtMemState are removed during preprocessing.

The application must pass a pointer to a previously allocated instance of the _CrtMemState structure, defined in CRTDBG.H, in the state parameter. If _CrtMemCheckpoint encounters an error during the checkpoint creation, the function generates a _CRT_WARN debug report describing the problem.

For more information about heap state functions and the _CrtMemState structure, see Heap State Reporting Functions. For information about how memory blocks are allocated, initialized, and managed in the debug version of the base heap, see Memory Management and the Debug Heap.

Example

/*****************************************************************
 *  EXAMPLE  1                                                   *
 *  This simple program illustrates the basic debugging features *
 *  of the C runtime libraries, and the kind of debug output     *
 *  that these features generate.                                *
 *****************************************************************/

#include <stdio.h>
#include <string.h>
#include <malloc.h>
#include <crtdbg.h>

// This routine place comments at the head of a section of debug output
void OutputHeading( const char * explanation )
{
   _RPT1( _CRT_WARN, "\n\n%s:\n**************************************\
************************************\n", explanation );
}

// The following macros set and clear, respectively, given bits
// of the C runtime library debug flag, as specified by a bitmask.
#ifdef   _DEBUG
#define  SET_CRT_DEBUG_FIELD(a) \
            _CrtSetDbgFlag((a) | _CrtSetDbgFlag(_CRTDBG_REPORT_FLAG))
#define  CLEAR_CRT_DEBUG_FIELD(a) \
            _CrtSetDbgFlag(~(a) & _CrtSetDbgFlag(_CRTDBG_REPORT_FLAG))
#else
#define  SET_CRT_DEBUG_FIELD(a)   ((void) 0)
#define  CLEAR_CRT_DEBUG_FIELD(a) ((void) 0)
#endif


void main( )
{
   char *p1, *p2;
   _CrtMemState s1, s2, s3;

   // Send all reports to STDOUT
   _CrtSetReportMode( _CRT_WARN, _CRTDBG_MODE_FILE );
   _CrtSetReportFile( _CRT_WARN, _CRTDBG_FILE_STDOUT );
   _CrtSetReportMode( _CRT_ERROR, _CRTDBG_MODE_FILE );
   _CrtSetReportFile( _CRT_ERROR, _CRTDBG_FILE_STDOUT );
   _CrtSetReportMode( _CRT_ASSERT, _CRTDBG_MODE_FILE );
   _CrtSetReportFile( _CRT_ASSERT, _CRTDBG_FILE_STDOUT );

   // Allocate 2 memory blocks and store a string in each
   p1 = malloc( 34 );
   strcpy( p1, "This is the p1 string (34 bytes)." );

   p2 = malloc( 34 );
   strcpy( p2, "This is the p2 string (34 bytes)." );


   OutputHeading( 
      "Use _ASSERTE to check that the two strings are identical" );
   _ASSERTE( strcmp( p1, p2 ) == 0 );

   OutputHeading( 
      "Use a _RPT macro to report the string contents as a warning" );
   _RPT2( _CRT_WARN, "p1 points to '%s' and \np2 points to '%s'\n", p1, p2 );

   OutputHeading( 
      "Use _CRTMemDumpAllObjectsSince to check the p1 and p2 allocations" );
   _CrtMemDumpAllObjectsSince( NULL );

   free( p2 );

   OutputHeading( 
      "Having freed p2, dump allocation information about p1 only" );
   _CrtMemDumpAllObjectsSince( NULL );

   // Store a memory checkpoint in the s1 memory-state structure
   _CrtMemCheckpoint( &s1 );

   // Allocate another block, pointed to by p2
   p2 = malloc( 38 );
   strcpy( p2, "This new p2 string occupies 38 bytes.");

   // Store a 2nd memory checkpoint in s2
   _CrtMemCheckpoint( &s2 );

   OutputHeading( 
      "Dump the changes that occurred between two memory checkpoints" );
   if ( _CrtMemDifference( &s3, &s1, &s2 ) )
      _CrtMemDumpStatistics( &s3 );

   // Free p2 again and store a new memory checkpoint in s2
   free( p2 );
   _CrtMemCheckpoint( &s2 );

   OutputHeading( 
      "Now the memory state at the two checkpoints is the same" );
   if ( _CrtMemDifference( &s3, &s1, &s2 ) )
      _CrtMemDumpStatistics( &s3 );

   strcpy( p1, "This new p1 string is over 34 bytes" );
   OutputHeading( "Free p1 after overwriting the end of the allocation" );
   free( p1 );

   // Set the debug-heap flag so that freed blocks are kept on the
   // linked list, to catch any inadvertent use of freed memory
   SET_CRT_DEBUG_FIELD( _CRTDBG_DELAY_FREE_MEM_DF );

   p1 = malloc( 10 );
   free( p1 );
   strcpy( p1, "Oops" );

   OutputHeading( "Perform a memory check after corrupting freed memory" );
   _CrtCheckMemory( );

   // Use explicit calls to _malloc_dbg to save file name and line number
   // information, and also to allocate Client type blocks for tracking
   p1 = _malloc_dbg( 40, _NORMAL_BLOCK, __FILE__, __LINE__ );
   p2 = _malloc_dbg( 40, _CLIENT_BLOCK, __FILE__, __LINE__ );
   strcpy( p1, "p1 points to a Normal allocation block" );
   strcpy( p2, "p2 points to a Client allocation block" );

   // You must use _free_dbg to free a Client block
   OutputHeading( 
      "Using free( ) to free a Client block causes an assertion failure" );
   free( p1 );
   free( p2 );

   p1 = malloc( 10 );
   OutputHeading( "Examine outstanding allocations (dump memory leaks)" );
   _CrtDumpMemoryLeaks( );

   // Set the debug-heap flag so that memory leaks are reported when
   // the process terminates. Then, exit.
   OutputHeading( "Program exits without freeing a memory block" );
   SET_CRT_DEBUG_FIELD( _CRTDBG_LEAK_CHECK_DF );
}

Output

Use _ASSERTE to check that the two strings are identical:
**************************************************************************
C:\DEV\EXAMPLE1.C(56) : Assertion failed: strcmp( p1, p2 ) == 0


Use a _RPT macro to report the string contents as a warning:
**************************************************************************
p1 points to 'This is the p1 string (34 bytes).' and 
p2 points to 'This is the p2 string (34 bytes).'


Use _CRTMemDumpAllObjectsSince to check the p1 and p2 allocations:
**************************************************************************
Dumping objects ->
{13} normal block at 0x00660B5C, 34 bytes long
 Data: <This is the p2 s> 54 68 69 73 20 69 73 20 74 68 65 20 70 32 20 73 
{12} normal block at 0x00660B10, 34 bytes long
 Data: <This is the p1 s> 54 68 69 73 20 69 73 20 74 68 65 20 70 31 20 73 
Object dump complete.


Having freed p2, dump allocation information about p1 only:
**************************************************************************
Dumping objects ->
{12} normal block at 0x00660B10, 34 bytes long
 Data: <This is the p1 s> 54 68 69 73 20 69 73 20 74 68 65 20 70 31 20 73 
Object dump complete.


Dump the changes that occurred between two memory checkpoints:
**************************************************************************
0 bytes in 0 Free Blocks.
38 bytes in 1 Normal Blocks.
0 bytes in 0 CRT Blocks.
0 bytes in 0 IgnoreClient Blocks.
0 bytes in 0 (null) Blocks.
Largest number used: 4 bytes.
Total allocations: 38 bytes.


Now the memory state at the two checkpoints is the same:
**************************************************************************


Free p1 after overwriting the end of the allocation:
**************************************************************************
memory check error at 0x00660B32 = 0x73, should be 0xFD.
memory check error at 0x00660B33 = 0x00, should be 0xFD.
DAMAGE: after Normal block (#12) at 0x00660B10.


Perform a memory check after corrupting freed memory:
**************************************************************************
memory check error at 0x00660B10 = 0x4F, should be 0xDD.
memory check error at 0x00660B11 = 0x6F, should be 0xDD.
memory check error at 0x00660B12 = 0x70, should be 0xDD.
memory check error at 0x00660B13 = 0x73, should be 0xDD.
memory check error at 0x00660B14 = 0x00, should be 0xDD.
DAMAGE: on top of Free block at 0x00660B10.
DAMAGED located at 0x00660B10 is 10 bytes long.


Using free( ) to free a Client block causes an assertion failure:
**************************************************************************
dbgheap.c(1039) : Assertion failed: pHead->nBlockUse == nBlockUse


Examine outstanding allocations (dump memory leaks):
**************************************************************************
Detected memory leaks!
Dumping objects ->
{18} normal block at 0x00660BE4, 10 bytes long
 Data: <          > CD CD CD CD CD CD CD CD CD CD 
Object dump complete.


Program exits without freeing a memory block:
**************************************************************************
Detected memory leaks!
Dumping objects ->
{18} normal block at 0x00660BE4, 10 bytes long
 Data: <          > CD CD CD CD CD CD CD CD CD CD 
Object dump complete.

Debug Functions