CWnd::SetWindowPos

BOOL SetWindowPos( const CWnd* pWndInsertAfter, int x, int y, int cx, int cy, UINT nFlags );

Return Value

Nonzero if the function is successful; otherwise 0.

Parameters

pWndInsertAfter

Identifies the CWnd object that will precede this CWnd object in the Z-order. This parameter can be a pointer to a CWnd or a Pointer to one of the following values:

• wndBottom   Places the window at the bottom of the Z-order. If this CWnd is a topmost window, the window loses its topmost status; the system places the window at the bottom of all other windows.
  
  
• wndTop   Places the window at the top of the Z-order.
  
  
• wndTopMost   Places the window above all nontopmost windows. The window maintains its topmost position even when it is deactivated.
  
  
• wndNoTopMost   Repositions the window to the top of all nontopmost windows (that is, behind all topmost windows). This flag has no effect if the window is already a nontopmost window.

  See the “Remarks” section for this function for rules about how this parameter is used.

x

Specifies the new position of the left side of the window.

y

Specifies the new position of the top of the window.

cx

Specifies the new width of the window.

cy

Specifies the new height of the window.

nFlags

Specifies sizing and positioning options. This parameter can be a combination of the following:

• SWP_DRAWFRAME   Draws a frame (defined when the window was created) around the window.
  
  
• SWP_FRAMECHANGED   Sends a WM_NCCALCSIZE message to the window, even if the window's size is not being changed. If this flag is not specified, WM_NCCALCSIZE is sent only when the window's size is being changed.
  
  
• SWP_HIDEWINDOW   Hides the window.
  
  
• SWP_NOACTIVATE   Does not activate the window. If this flag is not set, the window is activated and moved to the top of either the topmost or the nontopmost group (depending on the setting of the pWndInsertAfter parameter).
  
  
• SWP_NOCOPYBITS   Discards the entire contents of the client area. If this flag is not specified, the valid contents of the client area are saved and copied back into the client area after the window is sized or repositioned.
  
  
• SWP_NOMOVE   Retains current position (ignores the x and y parameters).
  
  
• SWP_NOOWNERZORDER   Does not change the owner window’s position in the Z-order.
  
  
• SWP_NOREDRAW   Does not redraw changes. If this flag is set, no repainting of any kind occurs. This applies to the client area, the nonclient area (including the title and scroll bars), and any part of the parent window uncovered as a result of the moved window. When this flag is set, the application must explicitly invalidate or redraw any parts of the window and parent window that must be redrawn.
  
  
• SWP_NOREPOSITION   Same as SWP_NOOWNERZORDER.
  
  
• SWP_NOSENDCHANGING   Prevents the window from receiving the WM_WINDOWPOSCHANGING message.
  
  
• SWP_NOSIZE   Retains current size (ignores the cx and cy parameters).
  
  
• SWP_NOZORDER   Retains current ordering (ignores pWndInsertAfter).
  
  
• SWP_SHOWWINDOW   Displays the window.

Remarks

Call this member function to change the size, position, and Z-order of child, pop-up, and top-level windows.

Windows are ordered on the screen according to their Z-order; the window at the top of the Z-order appears on top of all other windows in the order.

All coordinates for child windows are client coordinates (relative to the upper-left corner of the parent window’s client area). 

A window can be moved to the top of the Z-order either by setting the pWndInsertAfter parameter to &wndTopMost and ensuring that the SWP_NOZORDER flag is not set or by setting a window’s Z-order so that it is above any existing topmost windows. When a nontopmost window is made topmost, its owned windows are also made topmost. Its owners are not changed.

A topmost window is no longer topmost if it is repositioned to the bottom (&wndBottom) of the Z-order or after any nontopmost window. When a topmost window is made nontopmost, all of its owners and its owned windows are also made nontopmost windows.

If neither SWP_NOACTIVATE nor SWP_NOZORDER is specified (that is, when the application requests that a window be simultaneously activated and placed in the specified Z-order), the value specified in pWndInsertAfter is used only in the following circumstances:

• Neither &wndTopMost nor &wndNoTopMost is specified in the pWndInsertAfter parameter.
  
  
• This window is not the active window.

An application cannot activate an inactive window without also bringing it to the top of the Z-order. Applications can change the Z-order of an activated window without restrictions.

A nontopmost window may own a topmost window, but not vice versa. Any window (for example, a dialog box) owned by a topmost window is itself made a topmost window to ensure that all owned windows stay above their owner.

With Windows versions 3.1 and later, windows can be moved to the top of the Z-order and locked there by setting their WS_EX_TOPMOST styles. Such a topmost window maintains its topmost position even when deactivated. For example, selecting the WinHelp Always On Top command makes the Help window topmost, and it then remains visible when you return to your application.

To create a topmost window, call SetWindowPos with the pWndInsertAfter parameter equal to &wndTopMost, or set the WS_EX_TOPMOST style when you create the window.

If the Z-order contains any windows with the WS_EX_TOPMOST style, a window moved with the &wndTopMost value is placed at the top of all nontopmost windows, but below any topmost windows. When an application activates an inactive window without the WS_EX_TOPMOST bit, the window is moved above all nontopmost windows but below any topmost windows.

If SetWindowPos is called when the pWndInsertAfter parameter is &wndBottom and CWnd is a topmost window, the window loses its topmost status (WS_EX_TOPMOST is cleared), and the system places the window at the bottom of the Z-order.

CWnd Overview |  Class Members |  Hierarchy Chart

See Also   ::DeferWindowPos, ::SetWindowPos