WODM_GETPITCH
This message is used in an MMDRV_MESSAGE_PARAMS structure passed to the WAV_IOControl function to request a waveform output driver to return the specified device’s current pitch multiplier value.
Parameters
- uDeviceId
- Device identifier—0, 1, 2, and so on—for the target device.
- uMsg
- Specifies this message.
- dwUser
- Specifies a device instance identifier.
- dwParam1
- Specifies a pointer to a DWORD location used to return the current pitch multiplier value. This is specified as a fixed-point value, where the high-order WORD of the DWORD contains the signed integer part of the number and the low-order WORD contains the fractional part. The fraction consists of a WORD value, for which 0x8000 represents one half and 0x4000 represents one-fourth. For example, the value 0x00010000 specifies a multiplier of 1.0, with no pitch change, and a value of 0x000F8000 specifies a multiplier of 15.5.
- dwParam2
- Not used.
Return Values
MMSYSERR_NOERROR indicates success. Otherwise, the driver returns one of the MMSYSERR or WAVERR error values declared in the Mmsystem.h header file.
Remarks
The ACM sends this message by calling the audio driver’s WAV_IOControl entry point through the DeviceIoControl function.
Support for this message by drivers is optional. However, if a driver supports the WODM_SETPITCH message, it must support this message.