LINETRANSLATEOUTPUT

This structure describes the result of an address translation.

At a Glance

Header file: Tapi.h
Windows CE versions: 1.0 and later

Syntax

typedef struct linetranslateoutput_tag {
DWORD
dwTotalSize;
DWORD
dwNeededSize;
DWORD
dwUsedSize;

DWORD
dwDialableStringSize;
DWORD
dwDialableStringOffset;
DWORD
dwDisplayableStringSize;
DWORD
dwDisplayableStringOffset;

DWORD
dwCurrentCountry;
DWORD
dwDestCountry;
DWORD
dwTranslateResults;
} LINETRANSLATEOUTPUT, *LPLINETRANSLATEOUTPUT;

Members

dwTotalSize

Specifies the total size, in bytes, allocated to this data structure.

dwNeededSize

Specifies the size, in bytes, for this data structure that is needed to hold all the returned data.

dwUsedSize

Specifies the size, in bytes, of the portion of this data structure that contains useful data.

dwDialableStringSize

dwDialableStringOffset

Contain the translated output that can be passed to the lineMakeCall or other function requiring a dialable string. The output is always a NULL-terminated ASCII string (NULL is accounted for in Size). Ancillary fields such as name and subaddress are included in this output string if they were in the input string. This string may contain private data such as calling card numbers. It should not be displayed to the user, to prevent inadvertent visibility to unauthorized persons.

dwDisplayableStringSize

dwDisplayableStringOffset

Contain the translated output that can be displayed to the user for confirmation. It is identical to DialableString, except that calling card digits are replaced with the “friendly name” of the card enclosed within bracket characters (for example, “[AT&T Card]”), and ancillary fields such as name and subaddress are removed. It should normally be safe to display this string in call-status dialog boxes without exposing private data to unauthorized persons. This data is also appropriate to include in call logs.

dwCurrentCountry

Contains the country code configured in CurrentLocation. This value may be used to control the display by the application of certain user interface elements, for local call progress tone detection, and for other purposes.

dwDestCountry

Contains the destination country code of the translated address. This value may be passed to the dwCountryCode parameter of lineMakeCall and other dialing functions (so that the call progress tones of the destination country such as a busy signal are properly detected). This field is set to zero if the destination address passed to lineTranslateAddress is not in canonical format.

dwTranslateResults

Indicates the data derived from the translation process, which may assist the application in presenting user-interface elements. This field uses the following LINETRANSLATERESULT_ constants:

LINETRANSLATERESULT_CANONICAL

Indicates that the input string was in valid canonical format.

Value Description
LINETRANSLATERESULT_INTERNATIONAL If this bit is on, the call is being treated as an international call (country code specified in the destination address is different from the country code specified for CurrentLocation).
LINETRANSLATERESULT_LONGDISTANCE If this bit is on, the call is being treated as a long distance call (country code specified in the destination address is the same, but area code is different from those specified for CurrentLocation).
LINETRANSLATERESULT_LOCAL If this bit is on, the call is being treated as a local call (country code and area code specified in the destination address are the same as those specified for CurrentLocation).
LINETRANSLATERESULT_INTOLLLIST If this bit is on, the local call is being dialed as long distance because the country has toll calling and the prefix appears in the TollPrefixList of CurrentLocation.
LINETRANSLATERESULT_NOTINTOLLLIST If this bit is on, the country supports toll calling, but the prefix does not appear in the TollPrefixList, so the call is dialed as a local call. If both INTOLLIST and NOTINTOLLIST are off, the current country does not support toll prefixes, and user interface elements related to toll prefixes should not be presented to the user; if either such bit is on, the country does support toll lists, and the related user interface elements should be enabled.
LINETRANSLATERESULT_DIALBILLING Indicates that the returned address contains a “$”.
LINETRANSLATERESULT_DIALQUIET Indicates that the returned address contains a “@”.
LINETRANSLATERESULT_DIALDIALTONE Indicates that the returned address contains a “W”.
LINETRANSLATERESULT_DIALPROMPT Indicates that the returned address contains a “?”.

Remarks

No extensions.