4.2.18 The Printer's Horizontal-Movement Capabilities
The fXMove dialog box contains controls which you use to specify the
horizontal cursor-movement capabilities for a printer. The following lists
names of the controls and provides a brief description.
Control Description
---------------------------------------------------------------------------
CM_XM_NO_POR_GRX Specifies that the printer does not support horizontal
cursor-movement and in portrait mode.
CM_XM_NO_LAN_GRX Specifies that the printer does not support horizontal
cursor-movement and in landscape mode.
CM_XM_RESET_FONT Specifies that the Universal Printer Driver must
re-select the current font after each horizontal
cursor-movement command is issued.
CM_XM_FAVOR_ABS Specifies that the Universal Printer Driver should send
absolute- rather than relative-horizontal cursor
movement commands.
CM_XM_REL_LEFT Specifies that the command specified in the
CM_OCD_XM_REL box can move the cursor in both the
positive and the negative x-direction.
Diconix 150 Plus
For the Diconix 150 Plus printer, none of the boxes are checked.
HP LaserJet IIP
For the HP LaserJet IIP printer, the CM_XM_NO_POR_GRX box is checked
because the printer does not support horizontal cursor-movement commands
when in graphics mode and portrait orientation. The CM_XM_FAVOR_ABS box is
also checked, indicating that the Universal Printer Driver should send
absolute rather than relative horizontal cursor-movement commands.