4.2.19 The Printer's Vertical-Movement Capabilities

The fYMove dialog box contains controls which you use to specify the
vertical cursor-movement capabilities for a printer. The following lists
names of the controls and provides a brief description.

Control             Description
---------------------------------------------------------------------------

CM_YM_FAV_ABS       Specifies that the Universal Printer Driver should send
                    absolute rather than relative y-movement commands.

CM_YM_REL_UP        Specifies that the printer's relative y-movement
                    command will move the print head in both the positive
                    and the negative y-direction.

CM_YM_NO_POR_GRX    Specifies that the printer does not support vertical
                    cursor movement in graphics mode and in portrait
                    orientation.

CM_YM_NO_LAN_GRX    Specifies that the printer does not support vertical
                    cursor movement in graphics mode and in landscape
                    orientation.

CM_YM_CR            Specifies that the Universal Printer Driver should send
                    a carriage-return command to the printer before sending
                    any y-movement commands.

CM_YM_LINESPACING   Specifies that the Universal Printer Driver should use
                    the line spacing command for vertical movement.


Diconix 150 Plus

For the Diconix 150 Plus printer, the CM_YM_CR box is checked to indicate
that the Universal Printer Driver should send a carriage-return command
prior to sending any y-movement commands. The CM_YM_LINESPACING box is also
checked, indicating that the Universal Printer Driver should use the Line
Spacing command for vertical movement.


HP LaserJet IIP

For the HP LaserJet IIP printer, the CM_YM_FAV_ABS box is checked to
indicate that the Universal Printer Driver should send absolute instead of
relative vertical movement commands.