_VCOMM_ClearCommError

include vcomm.inc

VxDCall _VCOMM_ClearCommError, <hPort, <OFFSET32 cmst>, \
    <OFFSET32 dwErrors>>
or      eax, eax
jz      error_handler

Reenables a port after a communications error. Uses the C calling convention. This is an asynchronous service.

Returns TRUE if successful, FALSE otherwise. For extended error information, use _VCOMM_GetLastError.

hPort

Handle of a communications resource.

cmst

Address of a _COMSTAT structure that receives information about the current communications state. This parameter can be NULL.

dwErrors

Address of a 32-bit variable that receives communications errors that occurred since the last call. Can be zero or more for the following values:

Value	Meaning
CE_BREAK	The hardware detected a break condition.
CE_CTSTO	CTS time-out. Transmission was suspended due to CTS for the duration specified by the CtsTimeout field of _DCB.
CE_DNS	The parallel device is not selected.
CE_DSRTO	DSR time-out. Transmission was suspended due to DSR for the duration specified by the DsrTimeout field of _DCB.
CE_FRAME	The hardware detected a framing error.
CE_IOE	An input/output (I/O) error occurred.
CE_MODE	A requested mode is not supported, or the hPort parameter is invalid. If this flag is set, this is the only valid error.
CE_OOP	The parallel device signaled that it is out of paper.
CE_OVERRUN	Character-buffer overrun. The next character is lost.
CE_PTO	Time-out on a parallel device.
CE_RLSDTO	RLSD time-out. Transmission was suspended due to RLSD for the duration specified by the RlsdTimeout field of _DCB.
CE_RXOVER	Receive queue overflow. There is either no room in the receive queue, or a character was received after the EOF character was received.
CE_RXPARITY	The hardware detected a parity error.
CE_TXFULL	The _VCOMM_WriteComm service was called when the transmit queue was full.
CE_Unused1	Reserved; do not use.
CE_Unused2	Reserved; do not use.