Line Page
The Line page includes settings that relate to the physical line. These settings should be independent of any specific connection information, such as channel speed or dialing time-outs. Changing these settings will probably require a system restart.
- Friendly name and icon.
- The icon is to be determined. The picture currently uses an internal adapter as a placeholder. The friendly name of the line is derived from the physical line number (base-zero) and converted to a friendlier term. For example, Line 0 would be displayed as 1st Line.
- Switch Type.
- This combination box contains the list of switches supported by the adapter. These switches include the following:
(None)
|
Automatic
|
ATT: AT&T ESS 5
|
NI1: National ISDN 1
|
NTI: Northern Telecom DMS 100
|
INS64: NT&T (Japan)
|
1TR6: Deutsche Telecom
|
VN3: French Telecom
|
NET3: European Switch
|
DSS1: Euro-ISDN
|
Australian National
|
Belgium National
|
- Channel settings.
- This list view contains a list of all the B-channels for the physical line. There are three columns in this list view:
- Channel:
- Indicates the channel number (zero based).
- Phone Number:
- Specifies the phone number of the channel. This is displayed in TAPI's canonical address form.
- SPID:
- Indicates the SPID of the channel.
- Modify.
- The button invokes the Channel Settings dialog. This allows the user to assign a phone number and SPID to the selected channel. If no channel is selected, this button is disabled.