7.1.34 Disabling Font Simulations

The fCaps button displays a dialog box with seven checkbox controls. These
controls disable certain font simulations for a particular device font. The
following illustration shows the fCaps dialog box:

bitmap:  fcaps

The following list provides a brief description of each control.

Control                  Description
---------------------------------------------------------------------------

DF_NOITALIC              Specifies that the device font cannot be
                         italicized using the italic simulation.

DF_NOUNDER               Specifies that the device font cannot be
                         underlined using the underline simulation.

DF_XM_CR                 Specifies that the Universal Printer Driver should
                         send a carriage-return command after rendering a
                         line of text with this font.

DF_NO_BOLD               Specifies that the device font cannot be made bold
                         using the bold simulation.

DF_NO_DOUBLE_UNDERLINE   Specifies that the device font cannot be
                         double-underlined using the double-underline
                         simulation.

DF_NO_STRIKETHRU         Specifies that the device font cannot be struck
                         through using the strikethrough simulation.

DF_BKSP_OK               Specifies that a single backspace will be sent
                         when using a character-translation table that uses
                         strikeover characters. If this bit is not set, and
                         the font uses a CTT, explicit x-movement commands
                         are required.


Diconix 150 Plus

For the Diconix 150 Plus printer, all font simulations are supported;
therefore, none of the checkboxes were selected.

After you have created PFM files for your printer's fonts, you should
create a character-translation table (CTT).