6.4.3 General Data

Choosing the fGeneral button displays the fGeneral dialog box. This dialog
box contains four boxes which specify general rectangle-fill data. The
following illustration shows the fGeneral dialog box:

bitmap:  girctflg

The following list provides a brief description of each.

Box               Description
---------------------------------------------------------------------------

RF_WHITE_ABLE     If this box is checked, the printer supports a white-fill
                  command; if this box is not checked, the printer does not
                  support this command.

RF_MIN_IS_WHITE   If this box is checked, the minimum gray scale supported
                  by the printer is actually white; if this box is not
                  checked, the minimum gray scale contains black pels.

RF_CUR_X_END      If this box is checked, the cursor is aligned with the
                  right edge of the rectangle after a rectangle-fill
                  operation occurs. If this box is not checked, the cursor
                  is positioned at the rectangle origin after the fill
                  occurs.

RF_CUR_Y_END      If this box is checked, the cursor is aligned with the
                  bottom edge of the rectangle after a rectangle-fill
                  operation occurs. If this box is not checked, the cursor
                  is positioned at the rectangle origin after the fill
                  occurs.


Diconix 150 Plus

None of the boxes are checked.


HP LaserJet IIP

The RF_WHITE_ABLE box is checked to indicate that the HP LaserJet IIP can
use the White-fill command.