6.1.12 Begin Graphics

The Begin Graphics box contains the command which is sent to the printer to
enable graphics output. (Those printers that provide a specific command to
select a graphics resolution may also provide a command to enter graphics
mode.)


Diconix 150 Plus

The Diconix 150 Plus printer automatically begins rendering graphics when
it receives a Send Block command; therefore, the Begin Graphics box is
empty.


HP LaserJet IIP

For the HP LaserJet IIP printer, the Start Raster Graphics command
(ESC*rnA) signals the start of raster graphics and specifies the location
of the left margin. If n is 1, the current cursor location defines the left
margin for the graphics output; if n is 0, the left edge of the page
defines the left margin for the graphics output.

To specify the Start Raster Graphics command using the current cursor
location as the left margin, type the following in the Begin Graphics box:

    \x1B*r1A