VDMAD_Get_Virt_State

include vdmad.inc

mov eax, DMA_Handle
mov ebx, VMHandle
VxDcall VDMAD_Get_Virt_State

Allows a channel owner to determine the current virtual state of the channel. Uses ECX, EDX, ESI, flags

If translation is enabled, the ESI register contains the high linear address of the user's DMA region. The high linear address is used so that the DMA can proceed even if a different virtual machine is actually running at the time of the transfer.
If translation is not enabled, the ESI register contains the physical byte address programmed (shifted left 1, for word ports).
The ECX register contains count in bytes.
The DL register contains the mode. This is the same as the 8237 mode byte with channel number removed and the following DMA_masked and DMA_requested values set as appropriate:

DMA_masked	Channel masked and not ready for a transfer.
DMA_requested	Software request flag set.

The DH register contains the extended mode (ignored on non-PS/2 machines that do not have extended DMA capabilities).

DMA_Handle: Handle of DMA.
VMHandle: Handle of VM.

The virtual state consists of all the information necessary to physically program the DMA channel for a DMA transfer (linear address of target region, byte length of region, mode of transfer, and state of mask bit and software request bit).