5.1.11 Paper Type
The Paper Size and Paper Source dialog boxes contain an fPaperType button
that displays an fPaperType dialog box. This dialog box is used to match
paper sizes (legal, letter, and so on) to paper sources (trays, bins, or
other paper-feed mechanisms). The corresponding bit must be set in both the
PAPER SIZE data structure and the PAPER SOURCE data structure for the
combination to be valid. The name assigned to each bit is provided for
convenience. The following illustration shows the fPaperType dialog box:
bitmap: pisizept
The following list describes the four controls in this dialog box.
Control Description
---------------------------------------------------------------------------
PS_T_STD Specifies that this paper size corresponds to the standard
paper source.
PS_T_LARGE Specifies that this paper size corresponds to the large paper
source.
PS_T_ENV Specifies that this paper size corresponds to the envelope
paper source.
PS_T_LRGENV Specifies that this paper size corresponds to the
large-envelope paper source.
Diconix 150 Plus
For the Diconix 150 Plus printer, PS_T_STD is selected for the 8.5 by
11-inch paper size. This control is also selected for the tractor-feed and
sheet-feed paper sources in the Paper Source dialog box.
HP LaserJet IIP
For the HP LaserJet IIP printer, PS_T_STD is selected for the 8.5 by
11-inch paper size. This control is also selected for the upper bin, lower
bin, and manual feed paper sources in the Paper Source dialog box.