5.1 Supported Paper Sizes

After you specify control information for your printer in the PAGECONTROL
and CURSORMOVE dialog boxes, you should specify paper-size information. The
Paper Sizes dialog box contains controls which you use to specify printer
data such as whether a particular paper size is driver defined or
predefined, the paper dimensions, the cursor origin, the unprintable-region
dimensions, and so on. From the Printer Data menu, choose the Paper Info
command, and then the Size command. The following illustration shows the
Paper Sizes dialog box:

bitmap:  pisize


Diconix 150 Plus

For the Diconix 150 Plus printer, there are two supported paper sizes. The
first is 8.5 x 11 and the second is defined by the user.


HP LaserJet IIP

For the HP LaserJet IIP printer, there are four supported paper sizes and
four supported envelope sizes. The following list identifies each:

o   8.5 x 11 inches

o   Legal (8.5 x 14 inches)

o   Executive (7.25 x 10.5 inches)

o   A4 (210 x 297 millimeters)

o   Envelope #10 (4.125 x 9 inches)

o   Envelope DL (110 x 220 millimeters)

o   Envelope C5 (162 x 229 millimeters)

o   Envelope C3 (324 x 458 millimeters)

The examples in the following sections are based on the first paper size
initialized for each minidriver. In both instances, this is for 8.5 x 11
paper.